Good point, I will certainly take that into account! Thanks,
-- Eduardo Mayoral. On 13/09/18 19:15, Donny Davis wrote: > You could always go expand the volume after deployment by adding more > disks to the logical volume it creates. > > On Wed, Sep 12, 2018, 11:38 PM Jayme <[email protected] > <mailto:[email protected]>> wrote: > > Eduardo, there is one thing you should be aware of. The jbod > disks aren't all pooled together to create one large storage > domain. I had to spread my data domains over the devices such as a > data domain on /dev/SDA and data2 on sdb etc not a big problem > with only two disks per server but with ten it could get ugly > > On Thu, Sep 13, 2018, 4:52 AM Eduardo Mayoral, <[email protected] > <mailto:[email protected]>> wrote: > > Thanks for your answers! > > Yes, my plan is a replica-3 too. The cluster will be bigger, > though, 4 or 5 nodes with 10 disks each -> 40 to 50 bricks. > > Again, thanks for your help. > > -- > Eduardo Mayoral. > > On 12/09/18 20:54, Jayme wrote: >> Should also note that I am using replica 3 configuration with >> no arbiter for extra redundancy. >> >> On Wed, Sep 12, 2018 at 3:53 PM Jayme <[email protected] >> <mailto:[email protected]>> wrote: >> >> I am running a three server oVirt hyperconverged setup >> with JBOD disks. Two 2TB SSDs in JBOD per server. The >> configuration is working very well for me so far. >> >> >> >> On Wed, Sep 12, 2018 at 2:36 PM Donny Davis >> <[email protected] <mailto:[email protected]>> wrote: >> >> JBOD is on the drop down when you do the setup for >> the volumes >> >> On Wed, Sep 12, 2018, 1:50 AM Eduardo Mayoral >> <[email protected] <mailto:[email protected]>> wrote: >> >> Hi! >> >> I am thinking about using some spare servers I >> have for a >> hyperconverged oVirt + gluster. Only problem with >> these servers is that >> the RAID card is not specially good, so I am >> considering using gluster >> in a JBOD configuration. JBOD is supported for >> recent versions of >> gluster, but I am not sure if this configuration >> is supported by oVirt, >> or if there are any special considerations I >> should take into account. >> >> Anyone running oVirt + gluster with JBOD who >> can comment on this? >> >> Thanks! >> >> -- >> >> Eduardo Mayoral. >> >> _______________________________________________ >> Users mailing list -- [email protected] >> <mailto:[email protected]> >> To unsubscribe send an email to >> [email protected] <mailto:[email protected]> >> Privacy Statement: >> https://www.ovirt.org/site/privacy-policy/ >> oVirt Code of Conduct: >> >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> >> https://lists.ovirt.org/archives/list/[email protected]/message/2DTIGZ5VOKG52ZHCZTTCHGPT5NFKYSTP/ >> >> _______________________________________________ >> Users mailing list -- [email protected] >> <mailto:[email protected]> >> To unsubscribe send an email to [email protected] >> <mailto:[email protected]> >> Privacy Statement: >> https://www.ovirt.org/site/privacy-policy/ >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> >> https://lists.ovirt.org/archives/list/[email protected]/message/YGQUVKGP3S34JRB4CPWIRXZ2YDR27NFQ/ >> >
_______________________________________________ Users mailing list -- [email protected] To unsubscribe send an email to [email protected] Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/[email protected]/message/EEJQ35KS4D4LYWRQNOSXD3EQRHSPD3KV/
