Hello, I'm running my Ovirt-Node-NG based Hosts off ISCSI root. That is what "vdsm-tool config-lvm-filter" suggests. Is this correct ?
[root@myhostname ~]# vdsm-tool config-lvm-filter Analyzing host... Found these mounted logical volumes on this host: logical volume: /dev/mapper/onn_myhostname--iscsi-home mountpoint: /home devices: /dev/mapper/mpath-myhostname-disk1p2 logical volume: /dev/mapper/onn_myhostname--iscsi-ovirt--node--ng--4.2.7.1--0.20181209.0+1 mountpoint: / devices: /dev/mapper/mpath-myhostname-disk1p2 logical volume: /dev/mapper/onn_myhostname--iscsi-swap mountpoint: [SWAP] devices: /dev/mapper/mpath-myhostname-disk1p2 logical volume: /dev/mapper/onn_myhostname--iscsi-tmp mountpoint: /tmp devices: /dev/mapper/mpath-myhostname-disk1p2 logical volume: /dev/mapper/onn_myhostname--iscsi-var mountpoint: /var devices: /dev/mapper/mpath-myhostname-disk1p2 logical volume: /dev/mapper/onn_myhostname--iscsi-var_crash mountpoint: /var/crash devices: /dev/mapper/mpath-myhostname-disk1p2 logical volume: /dev/mapper/onn_myhostname--iscsi-var_log mountpoint: /var/log devices: /dev/mapper/mpath-myhostname-disk1p2 logical volume: /dev/mapper/onn_myhostname--iscsi-var_log_audit mountpoint: /var/log/audit devices: /dev/mapper/mpath-myhostname-disk1p2 This is the recommended LVM filter for this host: filter = [ "a|^/dev/mapper/mpath-myhostname-disk1p2$|", "r|.*|" ] This filter allows LVM to access the local devices used by the hypervisor, but not shared storage owned by Vdsm. If you add a new device to the volume group, you will need to edit the filter manually. Configure LVM filter? [yes,NO] Am 05.01.2019 um 19:34 schrieb teh...@take3.ro: > Hello Greg, > > this is what i was looking for. > > After running "vdsm-tool config-lvm-filter" on all hosts (and rebooting them) > all PVs, VGs and LVs from ISCSI domain were not visible anymore to local LVM > on the ovirt hosts. > > Additionally i made following tests: > - Cloning + running a VM on the ISCSI domain > - Detaching + (re-)attaching of the ISCSI domain > - Detaching, removing + (re-)import of the ISCSI domain > - Creating new ISCSI domain (well, i needed to use "force operation" because > creating on same ISCSI target) > > All tests were successful. > > As you wished i filed a bug: <https://github.com/oVirt/ovirt-site/issues/1857> > Thank you. > > Best regards, > Robert > _______________________________________________ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/VD6WCL343YGB2JVBWPZG54IMSQZ5VZ7M/ -- *Ralf Schenk* fon +49 (0) 24 05 / 40 83 70 fax +49 (0) 24 05 / 40 83 759 mail *r...@databay.de* <mailto:r...@databay.de> *Databay AG* Jens-Otto-Krag-Straße 11 D-52146 Würselen *www.databay.de* <http://www.databay.de> Sitz/Amtsgericht Aachen • HRB:8437 • USt-IdNr.: DE 210844202 Vorstand: Ralf Schenk, Dipl.-Ing. Jens Conze, Aresch Yavari, Dipl.-Kfm. Philipp Hermanns Aufsichtsratsvorsitzender: Wilhelm Dohmen ------------------------------------------------------------------------
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/HX3LO46HW6GERQXDRCLRYUUN2NLURQTK/
