On Fri, Mar 29, 2019 at 11:56 AM Callum Smith <[email protected]> wrote:
> Dear Simone, > > It doesn't seem to want to work: > > # Settings > he_fqdn: "he.virt.in.bmrc.ox.ac.uk" > he_ansible_host_name: "virthyp04.virt.in.bmrc.ox.ac.uk" > he_admin_password: <snip> > he_appliance_password: <snip> > > # Resources > he_mem_size_MB: "4096" > > # Storage > he_domain_type: "nfs" > he_storage_domain_addr: <snip> > he_storage_domain_path: <snip> > > # Network > he_vm_ip_addr: "10.141.31.240" > he_vm_ip_prefix: "20" > he_dns_addr: ["10.141.31.251","10.141.31.252","10.141.31.253"] > he_default_gateway_4: "10.141.31.254" > he_gateway: he_default_gateway_4 > he_force_ip4: true > he_bridge_if: bond0.910 > #he_just_collect_network_interfaces: true > > # Email > he_smtp_port: 25 > he_smtp_server: smtp.ox.ac.uk > he_dest_email: [email protected] > he_source_email: [email protected] > > # Ansible Stuff > ansible_ssh_user: root > ansible_become: false > > host_key_checking: false > > I've attached the output of the ansible command as a log file, this is > what happens when the IF bond0.910 is assigned the IP and `ovirtmgmt` is > not defined on the host. > TASK [ovirt.hosted_engine_setup : debug] ******************************************************************************************************************************************* ok: [virthyp04.virt.in.bmrc.ox.ac.uk] => { "target_address_v4": { "changed": true, "cmd": "ip addr show ovirtmgmt | grep 'inet ' | cut -d' ' -f6 | cut -d'/' -f1", "delta": "0:00:00.008744", "end": "2019-03-29 10:26:07.510481", "failed": false, "rc": 0, "start": "2019-03-29 10:26:07.501737", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": [] } } according to the logs ovirtmgmt is still there. can you please share the output of 'ip a'? > > Regards, > Callum > > -- > > Callum Smith > Research Computing Core > Wellcome Trust Centre for Human Genetics > University of Oxford > e. [email protected] > > On 28 Mar 2019, at 16:23, Simone Tiraboschi <[email protected]> wrote: > > > > On Thu, Mar 28, 2019 at 1:44 PM Callum Smith <[email protected]> wrote: > > Dear Simone, > > This is my experience too, but I'm now hitting this error on the > hosted-engine install at the part where it registers the hypervisor as the > first host in the engine: > > 2019-03-28 12:40:50,025Z INFO > [org.ovirt.engine.core.bll.host.HostConnectivityChecker] > (EE-ManagedThreadFactory-engine-Thread-1) [49f371c1] Engine managed to > communicate with VDSM > agent on host 'virthyp04.virt.in.bmrc.ox.ac.uk' with address ' > virthyp04.virt.in.bmrc.ox.ac.uk' ('db571f8a-fc85-40d3-b86f-c0038e3cd7e7') > 2019-03-28 12:40:53,111Z WARN > [org.ovirt.engine.core.bll.network.NetworkConfigurator] > (EE-ManagedThreadFactory-engine-Thread-1) [49f371c1] Failed to find a valid > interface for the > management network of host virthyp04.virt.in.bmrc.ox.ac.uk. If the > interface ovirtmgmt is a bridge, it should be torn-down manually. > 2019-03-28 12:40:53,111Z ERROR > [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand] > (EE-ManagedThreadFactory-engine-Thread-1) [49f371c1] Exception: > org.ovirt.engine.cor > e.bll.network.NetworkConfigurator$NetworkConfiguratorException: Interface > ovirtmgmt is invalid for management network > > The host's ovirtmgmt network connection is a statically assigned IP on a > VLAN on a bond, how should I be configuring this if not manually? > > > If you need to deploy over vlan 123 over bond0 simply configure a device > exactly called bond0.123 and statically configure your IP address there. > Choose it for hosted-engine deployment, nothing more: ovirtmgmt will be > automatically created over that device and the vlan ID will be set at > engine level for the whole management network. > > > > Regards, > Callum > > -- > > Callum Smith > Research Computing Core > Wellcome Trust Centre for Human Genetics > University of Oxford > e. [email protected] > > On 27 Mar 2019, at 17:09, Simone Tiraboschi <[email protected]> wrote: > > > > On Wed, Mar 27, 2019 at 4:27 PM Callum Smith <[email protected]> wrote: > > It's ok, migrating to 4.3.2 on the oVirt node (from 4.3.0) did the job of > fixing it. > > It is a bug if you intend on using the ovirtmgmt network to deploy your > ansible from > > > This is a bit tricky: when the engine brings up the host it also creates > the management bridge and this could lead to a temporary network down on > the selected interface for the bridge creation time (a couple of seconds?) > I tried it on a LAN and ansible ssh connection always survived but I 'm > not sure it's always true. > > > , and you need it to have an IP address already on that range! But - it > works as expected with the ovirtmgmt bridge setup so nothing to worry about. > > Regards, > Callum > > -- > > Callum Smith > Research Computing Core > Wellcome Trust Centre for Human Genetics > University of Oxford > e. [email protected] > > On 27 Mar 2019, at 14:57, Simone Tiraboschi <[email protected]> wrote: > > > > On Wed, Mar 27, 2019 at 3:24 PM Callum Smith <[email protected]> wrote: > > Dear All, > > We're trying to deploy our hosted engine remotely using the ansible hosted > engine playbook, which has been a rocky road but we're now at the point > where it's installing, and failing. We've got a pre-defined bond/VLAN setup > for our interface which has the correct bond0 bond0.123 and ovirtmgmt > bridge on top but we're hitting the classic error: > > Failed to find a valid in > terface for the management network of host virthyp04.virt.in.bmrc.ox.ac.uk. > If the interface ovirtmgmt is a bridge, it should be torn-down manually. > > Does this bug still exist in the latest (4.3) version, and is installing > using ansible with this network configuration impossible? > > > I don't think it's a bug; please avoid manually creating ovirtmgmt and > simply set: > he_bridge_if: "bond0.123", in ansible variable file and the management > bridge will be created for you at host-deploy time. > > > > Regards, > Callum > > -- > > Callum Smith > Research Computing Core > Wellcome Trust Centre for Human Genetics > University of Oxford > e. [email protected] > > _______________________________________________ > Users mailing list -- [email protected] > To unsubscribe send an email to [email protected] > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/[email protected]/message/SBOZ6FRBRQKE7FMTEHT6FBKHOW3PIPHK/ > > > > >
_______________________________________________ Users mailing list -- [email protected] To unsubscribe send an email to [email protected] Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/[email protected]/message/OO32P5X723NGD4R55B7UNTX5KHKJ62FH/
