Hi All, I have tested gluster snapshot without systemd.automount units and it works as follows:
[root@ovirt1 system]# gluster snapshot create isos-snap-2019-04-11 isos description TEST snapshot create: success: Snap isos-snap-2019-04-11_GMT-2019.04.12-11.18.24 created successfully [root@ovirt1 system]# gluster snapshot list isos-snap-2019-04-11_GMT-2019.04.12-11.18.24 [root@ovirt1 system]# gluster snapshot info isos-snap-2019-04-11_GMT-2019.04.12-11.18.24 Snapshot : isos-snap-2019-04-11_GMT-2019.04.12-11.18.24 Snap UUID : 70d5716e-4633-43d4-a562-8e29a96b0104 Description : TEST Created : 2019-04-12 11:18:24 Snap Volumes: Snap Volume Name : 584e88eab0374c0582cc544a2bc4b79e Origin Volume name : isos Snaps taken for isos : 1 Snaps available for isos : 255 Status : Stopped Best Regards,Strahil Nikolov В петък, 12 април 2019 г., 4:32:18 ч. Гринуич-4, Strahil Nikolov <hunter86...@yahoo.com> написа: Hello All, it seems that "systemd-1" is from the automount unit , and not from the systemd unit. [root@ovirt1 system]# systemctl cat gluster_bricks-isos.automount # /etc/systemd/system/gluster_bricks-isos.automount [Unit] Description=automount for gluster brick ISOS [Automount] Where=/gluster_bricks/isos [Install] WantedBy=multi-user.target Best Regards,Strahil Nikolov В петък, 12 април 2019 г., 4:12:31 ч. Гринуич-4, Strahil Nikolov <hunter86...@yahoo.com> написа: Hello All, I have tried to enable debug and see the reason for the issue. Here is the relevant glusterd.log: [2019-04-12 07:56:54.526508] E [MSGID: 106077] [glusterd-snapshot.c:1882:glusterd_is_thinp_brick] 0-management: Failed to get pool name for device systemd-1 [2019-04-12 07:56:54.527509] E [MSGID: 106121] [glusterd-snapshot.c:2523:glusterd_snapshot_create_prevalidate] 0-management: Failed to pre validate [2019-04-12 07:56:54.527525] E [MSGID: 106024] [glusterd-snapshot.c:2547:glusterd_snapshot_create_prevalidate] 0-management: Snapshot is supported only for thin provisioned LV. Ensure that all bricks of isos are thinly provisioned LV. [2019-04-12 07:56:54.527539] W [MSGID: 106029] [glusterd-snapshot.c:8613:glusterd_snapshot_prevalidate] 0-management: Snapshot create pre-validation failed [2019-04-12 07:56:54.527552] W [MSGID: 106121] [glusterd-mgmt.c:147:gd_mgmt_v3_pre_validate_fn] 0-management: Snapshot Prevalidate Failed [2019-04-12 07:56:54.527568] E [MSGID: 106121] [glusterd-mgmt.c:1015:glusterd_mgmt_v3_pre_validate] 0-management: Pre Validation failed for operation Snapshot on local node [2019-04-12 07:56:54.527583] E [MSGID: 106121] [glusterd-mgmt.c:2377:glusterd_mgmt_v3_initiate_snap_phases] 0-management: Pre Validation Failed here is the output of lvscan & lvs: [root@ovirt1 ~]# lvscan ACTIVE '/dev/gluster_vg_md0/my_vdo_thinpool' [9.86 TiB] inherit ACTIVE '/dev/gluster_vg_md0/gluster_lv_data' [500.00 GiB] inherit ACTIVE '/dev/gluster_vg_md0/gluster_lv_isos' [50.00 GiB] inherit ACTIVE '/dev/gluster_vg_ssd/my_ssd_thinpool' [168.59 GiB] inherit ACTIVE '/dev/gluster_vg_ssd/gluster_lv_engine' [40.00 GiB] inherit ACTIVE '/dev/centos_ovirt1/swap' [6.70 GiB] inherit ACTIVE '/dev/centos_ovirt1/home' [1.00 GiB] inherit ACTIVE '/dev/centos_ovirt1/root' [60.00 GiB] inherit [root@ovirt1 ~]# lvs --noheadings -o pool_lv my_vdo_thinpool my_vdo_thinpool my_ssd_thinpool [root@ovirt1 ~]# ssh ovirt2 "lvscan;lvs --noheadings -o pool_lv" ACTIVE '/dev/gluster_vg_md0/my_vdo_thinpool' [<9.77 TiB] inherit ACTIVE '/dev/gluster_vg_md0/gluster_lv_data' [500.00 GiB] inherit ACTIVE '/dev/gluster_vg_md0/gluster_lv_isos' [50.00 GiB] inherit ACTIVE '/dev/gluster_vg_ssd/my_ssd_thinpool' [<161.40 GiB] inherit ACTIVE '/dev/gluster_vg_ssd/gluster_lv_engine' [40.00 GiB] inherit ACTIVE '/dev/centos_ovirt2/root' [15.00 GiB] inherit ACTIVE '/dev/centos_ovirt2/home' [1.00 GiB] inherit ACTIVE '/dev/centos_ovirt2/swap' [16.00 GiB] inherit my_vdo_thinpool my_vdo_thinpool my_ssd_thinpool [root@ovirt1 ~]# ssh ovirt3 "lvscan;lvs --noheadings -o pool_lv" ACTIVE '/dev/gluster_vg_sda3/gluster_thinpool_sda3' [41.00 GiB] inherit ACTIVE '/dev/gluster_vg_sda3/gluster_lv_data' [15.00 GiB] inherit ACTIVE '/dev/gluster_vg_sda3/gluster_lv_isos' [15.00 GiB] inherit ACTIVE '/dev/gluster_vg_sda3/gluster_lv_engine' [15.00 GiB] inherit ACTIVE '/dev/centos_ovirt3/root' [20.00 GiB] inherit ACTIVE '/dev/centos_ovirt3/home' [1.00 GiB] inherit ACTIVE '/dev/centos_ovirt3/swap' [8.00 GiB] inherit gluster_thinpool_sda3 gluster_thinpool_sda3 gluster_thinpool_sda3 I am mounting my bricks via systemd , as I have issues with bricks being started before VDO. [root@ovirt1 ~]# findmnt /gluster_bricks/isos TARGET SOURCE FSTYPE OPTIONS /gluster_bricks/isos systemd-1 autofs rw,relatime,fd=31,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=21843 /gluster_bricks/isos /dev/mapper/gluster_vg_md0-gluster_lv_isos xfs rw,noatime,nodiratime,seclabel,attr2,inode64,noquota [root@ovirt1 ~]# ssh ovirt2 "findmnt /gluster_bricks/isos " TARGET SOURCE FSTYPE OPTIONS /gluster_bricks/isos systemd-1 autofs rw,relatime,fd=26,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=14279 /gluster_bricks/isos /dev/mapper/gluster_vg_md0-gluster_lv_isos xfs rw,noatime,nodiratime,seclabel,attr2,inode64,noquota [root@ovirt1 ~]# ssh ovirt3 "findmnt /gluster_bricks/isos " TARGET SOURCE FSTYPE OPTIONS /gluster_bricks/isos systemd-1 autofs rw,relatime,fd=35,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=17770 /gluster_bricks/isos /dev/mapper/gluster_vg_sda3-gluster_lv_isos xfs rw,noatime,nodiratime,seclabel,attr2,inode64,logbsize=256k,sunit=512,swidth=1024,noquota [root@ovirt1 ~]# grep "gluster_bricks" /proc/mounts systemd-1 /gluster_bricks/data autofs rw,relatime,fd=22,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=21513 0 0 systemd-1 /gluster_bricks/engine autofs rw,relatime,fd=25,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=21735 0 0 systemd-1 /gluster_bricks/isos autofs rw,relatime,fd=31,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=21843 0 0 /dev/mapper/gluster_vg_ssd-gluster_lv_engine /gluster_bricks/engine xfs rw,seclabel,noatime,nodiratime,attr2,inode64,sunit=256,swidth=256,noquota 0 0 /dev/mapper/gluster_vg_md0-gluster_lv_isos /gluster_bricks/isos xfs rw,seclabel,noatime,nodiratime,attr2,inode64,noquota 0 0 /dev/mapper/gluster_vg_md0-gluster_lv_data /gluster_bricks/data xfs rw,seclabel,noatime,nodiratime,attr2,inode64,noquota 0 0 Obviously , gluster is catching "systemd-1" as a device and tries to check if it's a thin LV.Where should I open a bug for that ? P.S.: Adding oVirt User list. Best Regards,Strahil Nikolov В четвъртък, 11 април 2019 г., 4:00:31 ч. Гринуич-4, Strahil Nikolov <hunter86...@yahoo.com> написа: Hi Rafi, thanks for your update. I have tested again with another gluster volume.[root@ovirt1 glusterfs]# gluster volume info isos Volume Name: isos Type: Replicate Volume ID: 9b92b5bd-79f5-427b-bd8d-af28b038ed2a Status: Started Snapshot Count: 0 Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1:/gluster_bricks/isos/isos Brick2: ovirt2:/gluster_bricks/isos/isos Brick3: ovirt3.localdomain:/gluster_bricks/isos/isos (arbiter) Options Reconfigured: cluster.granular-entry-heal: enable performance.strict-o-direct: on network.ping-timeout: 30 storage.owner-gid: 36 storage.owner-uid: 36 user.cifs: off features.shard: on cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 8 cluster.locking-scheme: granular cluster.data-self-heal-algorithm: full cluster.server-quorum-type: server cluster.quorum-type: auto cluster.eager-lock: enable network.remote-dio: off performance.low-prio-threads: 32 performance.io-cache: off performance.read-ahead: off performance.quick-read: off transport.address-family: inet nfs.disable: on performance.client-io-threads: off cluster.enable-shared-storage: enable Command run: logrotate -f glusterfs ; logrotate -f glusterfs-georep; gluster snapshot create isos-snap-2019-04-11 isos description TEST Logs:[root@ovirt1 glusterfs]# cat cli.log [2019-04-11 07:51:02.367453] I [cli.c:769:main] 0-cli: Started running gluster with version 5.5 [2019-04-11 07:51:02.486863] I [MSGID: 101190] [event-epoll.c:621:event_dispatch_epoll_worker] 0-epoll: Started thread with index 1 [2019-04-11 07:51:02.556813] E [cli-rpc-ops.c:11293:gf_cli_snapshot] 0-cli: cli_to_glusterd for snapshot failed [2019-04-11 07:51:02.556880] I [input.c:31:cli_batch] 0-: Exiting with: -1 [root@ovirt1 glusterfs]# cat glusterd.log [2019-04-11 07:51:02.553357] E [MSGID: 106024] [glusterd-snapshot.c:2547:glusterd_snapshot_create_prevalidate] 0-management: Snapshot is supported only for thin provisioned LV. Ensure that all bricks of isos are thinly provisioned LV. [2019-04-11 07:51:02.553365] W [MSGID: 106029] [glusterd-snapshot.c:8613:glusterd_snapshot_prevalidate] 0-management: Snapshot create pre-validation failed [2019-04-11 07:51:02.553703] W [MSGID: 106121] [glusterd-mgmt.c:147:gd_mgmt_v3_pre_validate_fn] 0-management: Snapshot Prevalidate Failed [2019-04-11 07:51:02.553719] E [MSGID: 106121] [glusterd-mgmt.c:1015:glusterd_mgmt_v3_pre_validate] 0-management: Pre Validation failed for operation Snapshot on local node My LVs hosting the bricks are:[root@ovirt1 ~]# lvs gluster_vg_md0 LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert gluster_lv_data gluster_vg_md0 Vwi-aot--- 500.00g my_vdo_thinpool 35.97 gluster_lv_isos gluster_vg_md0 Vwi-aot--- 50.00g my_vdo_thinpool 52.11 my_vdo_thinpool gluster_vg_md0 twi-aot--- 9.86t 2.04 11.45 [root@ovirt1 ~]# ssh ovirt2 "lvs gluster_vg_md0" LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert gluster_lv_data gluster_vg_md0 Vwi-aot--- 500.00g my_vdo_thinpool 35.98 gluster_lv_isos gluster_vg_md0 Vwi-aot--- 50.00g my_vdo_thinpool 25.94 my_vdo_thinpool gluster_vg_md0 twi-aot--- <9.77t 1.93 11.39 [root@ovirt1 ~]# ssh ovirt3 "lvs gluster_vg_sda3" LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert gluster_lv_data gluster_vg_sda3 Vwi-aotz-- 15.00g gluster_thinpool_sda3 0.17 gluster_lv_engine gluster_vg_sda3 Vwi-aotz-- 15.00g gluster_thinpool_sda3 0.16 gluster_lv_isos gluster_vg_sda3 Vwi-aotz-- 15.00g gluster_thinpool_sda3 0.12 gluster_thinpool_sda3 gluster_vg_sda3 twi-aotz-- 41.00g 0.16 1.58 As you can see - all bricks are thin LV and space is not the issue. Can someone hint me how to enable debug , so gluster logs can show the reason for that pre-check failure ? Best Regards,Strahil Nikolov В сряда, 10 април 2019 г., 9:05:15 ч. Гринуич-4, Rafi Kavungal Chundattu Parambil <rkavu...@redhat.com> написа: Hi Strahil, The name of device is not at all a problem here. Can you please check the log of glusterd, and see if there is any useful information about the failure. Also please provide the output of `lvscan` and `lvs --noheadings -o pool_lv` from all nodes Regards Rafi KC ----- Original Message ----- From: "Strahil Nikolov" <hunter86...@yahoo.com> To: gluster-us...@gluster.org Sent: Wednesday, April 10, 2019 2:36:39 AM Subject: [Gluster-users] Gluster snapshot fails Hello Community, I have a problem running a snapshot of a replica 3 arbiter 1 volume. Error: [root@ovirt2 ~]# gluster snapshot create before-423 engine description "Before upgrade of engine from 4.2.2 to 4.2.3" snapshot create: failed: Snapshot is supported only for thin provisioned LV. Ensure that all bricks of engine are thinly provisioned LV. Snapshot command failed Volume info: Volume Name: engine Type: Replicate Volume ID: 30ca1cc2-f2f7-4749-9e2e-cee9d7099ded Status: Started Snapshot Count: 0 Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1:/gluster_bricks/engine/engine Brick2: ovirt2:/gluster_bricks/engine/engine Brick3: ovirt3:/gluster_bricks/engine/engine (arbiter) Options Reconfigured: cluster.granular-entry-heal: enable performance.strict-o-direct: on network.ping-timeout: 30 storage.owner-gid: 36 storage.owner-uid: 36 user.cifs: off features.shard: on cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 8 cluster.locking-scheme: granular cluster.data-self-heal-algorithm: full cluster.server-quorum-type: server cluster.quorum-type: auto cluster.eager-lock: enable network.remote-dio: off performance.low-prio-threads: 32 performance.io-cache: off performance.read-ahead: off performance.quick-read: off transport.address-family: inet nfs.disable: on performance.client-io-threads: off cluster.enable-shared-storage: enable All bricks are on thin lvm with plenty of space, the only thing that could be causing it is that ovirt1 & ovirt2 are on /dev/gluster_vg_ssd/gluster_lv_engine , while arbiter is on /dev/gluster_vg_sda3/gluster_lv_engine. Is that the issue ? Should I rename my brick's VG ? If so, why there is no mentioning in the documentation ? Best Regards, Strahil Nikolov _______________________________________________ Gluster-users mailing list gluster-us...@gluster.org https://lists.gluster.org/mailman/listinfo/gluster-users
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/P3RCXYVPS7PQNB3ZNWBDMLQ2W3KCIZQJ/