Man, Mode 4 is LACP. You must use the correct technology or things will get messy.
I run a lot of RHV and oVirt clusters with Mode 4, 802.3ad, LACP or any other name you want to use. But you must comply with the rules. I do recommend some reading about bonding modes, don’t just enable them and see what happens, this is not responsible at all. https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Virtualization/3.3/html/Installation_Guide/Bonding_Modes.html And man, open a new thread, this one was from a VLAN issue on the storage network. > On 5 Feb 2020, at 19:53, [email protected] wrote: > > So if the bond is set to mode 4 I should LAG the ports it connects to? It > doesn't affect an identical server not in the ovirt cluster and shows 2 Gb > connection. I have tried mode 1 and 2 with the same result. Also, the other > ovirt node is in mode 4 and no issues at all. > > Eric Evans > Digital Data Services LLC. > 304.660.9080 > > > -----Original Message----- > From: Vinícius Ferrão <[email protected]> > Sent: Wednesday, February 05, 2020 4:51 PM > To: [email protected] > Cc: [email protected] > Subject: [ovirt-users] Re: Deploy Hosted Engine fails at "Set VLAN ID at > datacenter level" > > Mode 4 is LACP. > > So the switches must be talking LACP. > > > >> On 5 Feb 2020, at 18:28, [email protected] wrote: >> >> I tried to set lags but it killed communication altogether. So no they are >> not. >> >> Eric Evans >> Digital Data Services LLC. >> 304.660.9080 >> >> >> -----Original Message----- >> From: Vinícius Ferrão <[email protected]> >> Sent: Wednesday, February 05, 2020 3:55 PM >> To: [email protected] >> Cc: [email protected] >> Subject: [ovirt-users] Re: Deploy Hosted Engine fails at "Set VLAN ID at >> datacenter level" >> >> The switches are configured for LACP Active mode? >> >> >>> On 5 Feb 2020, at 17:40, [email protected] wrote: >>> >>> I have a hypervisor with nic bonding in place and it has some communication >>> issues. It constantly goes up and down and into non operational mode but >>> comes back up. Is there a fix for this? Using Mode 4 for bonding. >>> >>> Eric Evans >>> Digital Data Services LLC. >>> 304.660.9080 >>> >>> >>> -----Original Message----- >>> From: [email protected] <[email protected]> >>> Sent: Wednesday, February 05, 2020 12:48 PM >>> To: [email protected] >>> Subject: [ovirt-users] Re: Deploy Hosted Engine fails at "Set VLAN ID at >>> datacenter level" >>> >>> Thank you Guillaume! My mistake. Resolved. >>> >>> I am now having further issues I believe to be because I am using tagged >>> VLANs with NIC teaming. It appears that teaming is not well supported in >>> oVirt - is that accurate, and that I should rebuild using bonds. If you >>> have any experience to shed light on this it is much appreciated. >>> >>> [ INFO ] TASK [ovirt.hosted_engine_setup : Fail with error >>> description] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": >>> false, "msg": "The host has been set in non_operational status, >>> deployment errors: code 505: Host fmov1n1.bcn.dtcorp.com installation >>> failed. Failed to configure management network on the host., code >>> 9000: Failed to verify Power Management configuration for Host >>> fmov1n1.bcn.dtcorp.com., fix accordingly and re-deploy."} >>> >>> Thanks so very much, >>> Charles >>> _______________________________________________ >>> Users mailing list -- [email protected] To unsubscribe send an email to >>> [email protected] Privacy >>> Statement: https://www.ovirt.org/site/privacy-policy/ >>> oVirt Code of Conduct: >>> https://www.ovirt.org/community/about/community-guidelines/ >>> List Archives: >>> https://lists.ovirt.org/archives/list/[email protected]/message/LPUANZA >>> L >>> Z7L5ZC26XE65AKFJCPUINU2N/ >>> _______________________________________________ >>> Users mailing list -- [email protected] To unsubscribe send an email to >>> [email protected] Privacy >>> Statement: https://www.ovirt.org/site/privacy-policy/ >>> oVirt Code of Conduct: >>> https://www.ovirt.org/community/about/community-guidelines/ >>> List Archives: >>> https://lists.ovirt.org/archives/list/[email protected]/message/NB3OJYA >>> H >>> UG3YWTV3KHPGEYFVUM3ZZHIA/ >> _______________________________________________ >> Users mailing list -- [email protected] >> To unsubscribe send an email to [email protected] Privacy >> Statement: https://www.ovirt.org/site/privacy-policy/ >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/[email protected]/message/MRNRY7MD >> EFUF4T72UQTPB4YNGAXKO4IJ/ >> > > _______________________________________________ > Users mailing list -- [email protected] > To unsubscribe send an email to [email protected] Privacy Statement: > https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/[email protected]/message/D6JR7VG4XAMY3GNURW6JVAMX3JNQPLQ2/ > _______________________________________________ Users mailing list -- [email protected] To unsubscribe send an email to [email protected] Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/[email protected]/message/U6G46FE77ELTYC7HFAAAA6X64JHXXWDA/
