Hi!I have banged my head against deploying the ovirt 4.4 self-hosted engine on Centos 8.2 for last couple of days.
First I was astonished that resources.ovirt.org has no IPv6 connectivity, which made my initial plan for a mostly IPv6-only deployment impossible.
CentOS was installed from scratch using the ks.cgf Kickstart file below, which also adds the ovirt 4.4 repo and installs cockpit-ovirt-dashboard & ovirt-engine-appliance.
When deploying the hosted-engine from cockpit while logged in as a non-root (although privileged) user, the "(3) Prepare VM" step instantly fails with a nondescript error message and without generating any logs. By using the browser dev tools it was determined that this was because the ansible vars file could not be created as the non-root user did not have write permissions in '/var/lib/ovirt-hosted-engine-setup/cockpit/' . Shouldn't cockpit be capable of using sudo when appropriate, or at least give a more descriptive error message?
After login into cockpit as root, or when using the command line ovirt-hosted-engine-setup tool, the deployment fails with "Failed to download metadata for repo 'AppStream'". This seems to be because a) the dnsmasq running on the host does not forward dns queries, even though the host itself can resolve dns queries just fine, and b) there also does not seem to be any functioning routing setup to reach anything outside the host. Regarding a) it is strange that dnsmasq is running with a config file '/var/lib/libvirt/dnsmasq/default.conf' containing the 'no-resolv' option. Could the operation of systemd-resolved be interfering with dnsmasq (see ss -tulpen output)? I tried to manually stop systemd-resolved, but got the same behaviour as before.
I hope someone could give me a hint how I could get past this problem, as so far my ovirt experience has been a little bit sub-par. :D
Also when running ovirt-hosted-engine-cleanup, the extracted engine VMs in /var/tmp/localvm* are not removed, leading to a "disk-memory-leak" with subsequent runs.
Best regards Jonas --- ss -tulpen output post deploy-run --- [root@nxtvirt ~]# ss -tulpen | grep ':53 'udp UNCONN 0 0 127.0.0.53%lo:53 0.0.0.0:* users:(("systemd-resolve",pid=1379,fd=18)) uid:193 ino:32910 sk:6 <-> udp UNCONN 0 0 [fd00:1234:5678:900::1]:53 [::]:* users:(("dnsmasq",pid=13525,fd=15)) uid:979 ino:113580 sk:d v6only:1 <-> udp UNCONN 0 0 [fe80::5054:ff:fe94:f314]%virbr0:53 [::]:* users:(("dnsmasq",pid=13525,fd=12)) uid:979 ino:113575 sk:e v6only:1 <-> tcp LISTEN 0 32 [fd00:1234:5678:900::1]:53 [::]:* users:(("dnsmasq",pid=13525,fd=16)) uid:979 ino:113581 sk:20 v6only:1 <-> tcp LISTEN 0 32 [fe80::5054:ff:fe94:f314]%virbr0:53 [::]:* users:(("dnsmasq",pid=13525,fd=13)) uid:979 ino:113576 sk:21 v6only:1 <->
--- running dnsmasq processes on host ('nxtvirt') post deploy-run ---
dnsmasq 13525 0.0 0.0 71888 2344 ? S 12:31 0:00
/usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf
--leasefile-ro --dhcp-script=/usr/libexec/libvirt_leaseshelper
root 13526 0.0 0.0 71860 436 ? S 12:31 0:00
/usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf
--leasefile-ro --dhcp-script=/usr/libexec/libvirt_leaseshelper
--- var/lib/libvirt/dnsmasq/default.conf ---##WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE ##OVERWRITTEN AND LOST. Changes to this configuration should be made using:
## virsh net-edit default
## or other application using the libvirt API.
##
## dnsmasq conf file created by libvirt
strict-order
pid-file=/run/libvirt/network/default.pid
except-interface=lo
bind-dynamic
interface=virbr0
dhcp-option=3
no-resolv
ra-param=*,0,0
dhcp-range=fd00:1234:5678:900::10,fd00:1234:5678:900::ff,64
dhcp-lease-max=240
dhcp-hostsfile=/var/lib/libvirt/dnsmasq/default.hostsfile
addn-hosts=/var/lib/libvirt/dnsmasq/default.addnhosts
enable-ra
--- cockpit wizard overview before the 'Prepare VM' step ---
VM
Engine FQDN:engine.*REDACTED*
MAC Address:00:16:3e:20:13:b3
Network Configuration:Static
VM IP Address:*REDACTED*:1099:babe::3/64
Gateway Address:*REDACTED*:1099::1
DNS Servers:*REDACTED*:1052::11
Root User SSH Access:yes
Number of Virtual CPUs:4
Memory Size (MiB):4096
Root User SSH Public Key:(None)
Add Lines to /etc/hosts:yes
Bridge Name:ovirtmgmt
Apply OpenSCAP profile:no
Engine
SMTP Server Name:localhost
SMTP Server Port Number:25
Sender E-Mail Address:root@localhost
Recipient E-Mail Addresses:root@localhost
--- ks.cgf ---
#version=RHEL8
ignoredisk --only-use=vda
autopart --type=lvm
# Partition clearing information
clearpart --drives=vda --all --initlabel
# Use graphical install
#graphical
text
# Use CDROM installation media
cdrom
# Keyboard layouts
keyboard --vckeymap=de --xlayouts='de','us'
# System language
lang en_US.UTF-8
# Network information
network --bootproto=static --device=enp1s0 --ip=192.168.199.250
--netmask=255.255.255.0 --gateway=192.168.199.10
--ipv6=*REDACTED*:1090:babe::250/64 --ipv6gateway=*REDACTED*:1090::1
--hostname=nxtvirt.*REDACTED* --nameserver=*REDACTED*:1052::11
--activate
network --hostname=nxtvirt.*REDACTED* # Root password rootpw --iscrypted $6$*REDACTED* firewall --enabled --service=cockpit --service=ssh # Run the Setup Agent on first boot firstboot --enable # Do not configure the X Window System skipx # System services services --enabled="chronyd" # System timezone timezone Etc/UTC --isUtc --ntpservers=ntp.*REDACTED*,ntp2.*REDACTED*user --name=nonrootuser --groups=wheel --password=$6$*REDACTED* --iscrypted
# KVM Users/Groups group --name=kvm --gid=36 user --name=vdsm --uid=36 --gid=36 %packages @^server-product-environment #@graphical-admin-tools @headless-management kexec-tools cockpit %end %addon com_redhat_kdump --enable --reserve-mb='auto' %end %anacondapwpolicy root --minlen=6 --minquality=1 --notstrict --nochanges --notempty pwpolicy user --minlen=6 --minquality=1 --notstrict --nochanges --emptyok pwpolicy luks --minlen=6 --minquality=1 --notstrict --nochanges --notempty
%end %post --erroronfail --log=/root/ks-post.log #!/bin/sh dnf update -y # NFS storage mkdir -p /opt/ovirt/nfs-storage chown -R 36:36 /opt/ovirt/nfs-storage chmod 0755 /opt/ovirt/nfs-storage echo "/opt/ovirt/nfs-storage localhost" > /etc/exports echo "/opt/ovirt/nfs-storage engine.*REDACTED*" >> /etc/exports dnf install -y nfs-utils systemctl enable nfs-server.service # Install ovirt packagesdnf install -y https://resources.ovirt.org/pub/yum-repo/ovirt-release44.rpm
dnf install -y cockpit-ovirt-dashboard ovirt-engine-appliance # Enable cockpit systemctl enable cockpit.socket %end #reboot --eject --kexec reboot --eject --- Host (nxtvirt) ip -a post deploy-run ---1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel
state UP group default qlen 1000
link/ether 52:54:00:ad:79:1b brd ff:ff:ff:ff:ff:ff
inet 192.168.199.250/24 brd 192.168.199.255 scope global
noprefixroute enp1s0
valid_lft forever preferred_lft forever
inet6 *REDACTED*:1099:babe::250/64 scope global noprefixroute
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fead:791b/64 scope link noprefixroute
valid_lft forever preferred_lft forever
5: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP group default qlen 1000
link/ether 52:54:00:94:f3:14 brd ff:ff:ff:ff:ff:ff
inet6 fd00:1234:5678:900::1/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fe94:f314/64 scope link
valid_lft forever preferred_lft forever
6: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc fq_codel master
virbr0 state DOWN group default qlen 1000
link/ether 52:54:00:94:f3:14 brd ff:ff:ff:ff:ff:ff
7: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel
master virbr0 state UNKNOWN group default qlen 1000
link/ether fe:16:3e:68:d3:8a brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc16:3eff:fe68:d38a/64 scope link
valid_lft forever preferred_lft forever
--- iptables-save post deploy-run ---
# Generated by iptables-save v1.8.4 on Sun Jun 28 13:20:53 2020
*filter
:INPUT ACCEPT [4007:8578553]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [3920:7633249]
:LIBVIRT_INP - [0:0]
:LIBVIRT_OUT - [0:0]
:LIBVIRT_FWO - [0:0]
:LIBVIRT_FWI - [0:0]
:LIBVIRT_FWX - [0:0]
-A INPUT -j LIBVIRT_INP
-A FORWARD -j LIBVIRT_FWX
-A FORWARD -j LIBVIRT_FWI
-A FORWARD -j LIBVIRT_FWO
-A OUTPUT -j LIBVIRT_OUT
-A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 53 -j ACCEPT
-A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT
-A LIBVIRT_INP -i virbr0 -p udp -m udp --dport 67 -j ACCEPT
-A LIBVIRT_INP -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT
-A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 53 -j ACCEPT
-A LIBVIRT_OUT -o virbr0 -p tcp -m tcp --dport 53 -j ACCEPT
-A LIBVIRT_OUT -o virbr0 -p udp -m udp --dport 68 -j ACCEPT
-A LIBVIRT_OUT -o virbr0 -p tcp -m tcp --dport 68 -j ACCEPT
-A LIBVIRT_FWO -i virbr0 -j REJECT --reject-with icmp-port-unreachable
-A LIBVIRT_FWI -o virbr0 -j REJECT --reject-with icmp-port-unreachable
-A LIBVIRT_FWX -i virbr0 -o virbr0 -j ACCEPT
COMMIT
# Completed on Sun Jun 28 13:20:53 2020
# Generated by iptables-save v1.8.4 on Sun Jun 28 13:20:53 2020
*security
:INPUT ACCEPT [3959:8576054]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [3920:7633249]
COMMIT
# Completed on Sun Jun 28 13:20:53 2020
# Generated by iptables-save v1.8.4 on Sun Jun 28 13:20:53 2020
*raw
:PREROUTING ACCEPT [4299:8608260]
:OUTPUT ACCEPT [3920:7633249]
COMMIT
# Completed on Sun Jun 28 13:20:53 2020
# Generated by iptables-save v1.8.4 on Sun Jun 28 13:20:53 2020
*mangle
:PREROUTING ACCEPT [4299:8608260]
:INPUT ACCEPT [4007:8578553]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [3920:7633249]
:POSTROUTING ACCEPT [3923:7633408]
:LIBVIRT_PRT - [0:0]
-A POSTROUTING -j LIBVIRT_PRT
COMMIT
# Completed on Sun Jun 28 13:20:53 2020
# Generated by iptables-save v1.8.4 on Sun Jun 28 13:20:53 2020
*nat
:PREROUTING ACCEPT [337:32047]
:INPUT ACCEPT [0:0]
:POSTROUTING ACCEPT [159:9351]
:OUTPUT ACCEPT [159:9351]
:LIBVIRT_PRT - [0:0]
-A POSTROUTING -j LIBVIRT_PRT
COMMIT
# Completed on Sun Jun 28 13:20:53 2020
gzI19bYIfs3W.gz
Description: GNU Zip compressed data
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/G452P2BN7Z7SBIGX3V6PB2RKDZJ72KKI/
