4.3.10 is the latest version of oVirt 4.3, not sure why you'd want to try installing an older version.
These types of installer errors are usually caused by either the device 'sdb' is smaller than you're trying to allocate or has some previous partition formatting on it (installer presumes a non-formatted drive, and stops to protect data) or the system has lvm or multipathd filtering out the drive /dev/sdb In the second case usually wipefs can be used to make /dev/sdb clean for script to work. for the third case, you may need to edit the /etc/multipathd.conf or lvm.conf and reboot to make the device available to the installer. On Thu, May 13, 2021 at 7:23 AM techbreak--- via Users <[email protected]> wrote: > As title, we want to use 3 hosts with hyperconverged solution of oVirt. We > installed oVirt and Gluster as reported in the guide > https://www.ovirt.org/documentation/gluster-hyperconverged/chap-Deploying_Hyperconverged.html > When we try to deploy, we get some errors which we cannot figure out. > > ============================================================== > gdeploy creates as configuration rules: > hc_nodes: > hosts: > virtnodetest-0-0: > gluster_infra_volume_groups: > - vgname: gluster_vg_sdb > pvname: /dev/sdb > gluster_infra_mount_devices: > - path: /gluster_bricks/engine > lvname: gluster_lv_engine > vgname: gluster_vg_sdb > - path: /gluster_bricks/isostorage > lvname: gluster_lv_isostorage > vgname: gluster_vg_sdb > - path: /gluster_bricks/vmstorage > lvname: gluster_lv_vmstorage > vgname: gluster_vg_sdb > gluster_infra_thick_lvs: > - vgname: gluster_vg_sdb > lvname: gluster_lv_engine > size: 150G > gluster_infra_thinpools: > - vgname: gluster_vg_sdb > thinpoolname: gluster_thinpool_gluster_vg_sdb > poolmetadatasize: 16G > gluster_infra_lv_logicalvols: > - vgname: gluster_vg_sdb > thinpool: gluster_thinpool_gluster_vg_sdb > lvname: gluster_lv_isostorage > lvsize: 250G > - vgname: gluster_vg_sdb > thinpool: gluster_thinpool_gluster_vg_sdb > lvname: gluster_lv_vmstorage > lvsize: 3500G > virtnodetest-0-1: > gluster_infra_volume_groups: > - vgname: gluster_vg_sdb > pvname: /dev/sdb > gluster_infra_mount_devices: > - path: /gluster_bricks/engine > lvname: gluster_lv_engine > vgname: gluster_vg_sdb > - path: /gluster_bricks/isostorage > lvname: gluster_lv_isostorage > vgname: gluster_vg_sdb > - path: /gluster_bricks/vmstorage > lvname: gluster_lv_vmstorage > vgname: gluster_vg_sdb > gluster_infra_thick_lvs: > - vgname: gluster_vg_sdb > lvname: gluster_lv_engine > size: 150G > gluster_infra_thinpools: > - vgname: gluster_vg_sdb > thinpoolname: gluster_thinpool_gluster_vg_sdb > poolmetadatasize: 16G > gluster_infra_lv_logicalvols: > - vgname: gluster_vg_sdb > thinpool: gluster_thinpool_gluster_vg_sdb > lvname: gluster_lv_isostorage > lvsize: 250G > - vgname: gluster_vg_sdb > thinpool: gluster_thinpool_gluster_vg_sdb > lvname: gluster_lv_vmstorage > lvsize: 3500G > virtnodetest-0-2: > gluster_infra_volume_groups: > - vgname: gluster_vg_sdb > pvname: /dev/sdb > gluster_infra_mount_devices: > - path: /gluster_bricks/engine > lvname: gluster_lv_engine > vgname: gluster_vg_sdb > - path: /gluster_bricks/isostorage > lvname: gluster_lv_isostorage > vgname: gluster_vg_sdb > - path: /gluster_bricks/vmstorage > lvname: gluster_lv_vmstorage > vgname: gluster_vg_sdb > gluster_infra_thick_lvs: > - vgname: gluster_vg_sdb > lvname: gluster_lv_engine > size: 150G > gluster_infra_thinpools: > - vgname: gluster_vg_sdb > thinpoolname: gluster_thinpool_gluster_vg_sdb > poolmetadatasize: 16G > gluster_infra_lv_logicalvols: > - vgname: gluster_vg_sdb > thinpool: gluster_thinpool_gluster_vg_sdb > lvname: gluster_lv_isostorage > lvsize: 250G > - vgname: gluster_vg_sdb > thinpool: gluster_thinpool_gluster_vg_sdb > lvname: gluster_lv_vmstorage > lvsize: 3500G > vars: > gluster_infra_disktype: JBOD > gluster_set_selinux_labels: true > gluster_infra_fw_ports: > - 2049/tcp > - 54321/tcp > - 5900/tcp > - 5900-6923/tcp > - 5666/tcp > - 16514/tcp > gluster_infra_fw_permanent: true > gluster_infra_fw_state: enabled > gluster_infra_fw_zone: public > gluster_infra_fw_services: > - glusterfs > gluster_features_force_varlogsizecheck: false > cluster_nodes: > - virtnodetest-0-0 > - virtnodetest-0-1 > - virtnodetest-0-2 > gluster_features_hci_cluster: '{{ cluster_nodes }}' > gluster_features_hci_volumes: > - volname: engine > brick: /gluster_bricks/engine/engine > arbiter: 0 > - volname: isostorage > brick: /gluster_bricks/isostorage/isostorage > arbiter: 0 > - volname: vmstorage > brick: /gluster_bricks/vmstorage/vmstorage > arbiter: 0 > > > ========================================================================= > The system returns this error: > > PLAY [Setup backend] > *********************************************************** > > TASK [Gathering Facts] > ********************************************************* > ok: [virtnodetest-0-2] > ok: [virtnodetest-0-1] > ok: [virtnodetest-0-0] > > TASK [Check if valid hostnames are provided] > *********************************** > changed: [virtnodetest-0-1] => (item=virtnodetest-0-1) > changed: [virtnodetest-0-1] => (item=virtnodetest-0-0) > changed: [virtnodetest-0-1] => (item=virtnodetest-0-2) > > TASK [Check if provided hostnames are valid] > *********************************** > ok: [virtnodetest-0-1] => { > "changed": false, > "msg": "All assertions passed" > } > ok: [virtnodetest-0-0] => { > "changed": false, > "msg": "All assertions passed" > } > ok: [virtnodetest-0-2] => { > "changed": false, > "msg": "All assertions passed" > } > > TASK [Check if /var/log has enough disk space] > ********************************* > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [Check if the /var is greater than 15G] > *********************************** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [Check if disks have logical block size of 512B] > ************************** > skipping: [virtnodetest-0-1] => (item={u'vgname': u'gluster_vg_sdb', > u'pvname': u'/dev/sdb'}) > skipping: [virtnodetest-0-0] => (item={u'vgname': u'gluster_vg_sdb', > u'pvname': u'/dev/sdb'}) > skipping: [virtnodetest-0-2] => (item={u'vgname': u'gluster_vg_sdb', > u'pvname': u'/dev/sdb'}) > > TASK [Check if logical block size is 512 bytes] > ******************************** > skipping: [virtnodetest-0-1] => (item=Logical Block Size) > skipping: [virtnodetest-0-0] => (item=Logical Block Size) > skipping: [virtnodetest-0-2] => (item=Logical Block Size) > > TASK [Get logical block size of VDO devices] > *********************************** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [Check if logical block size is 512 bytes for VDO devices] > **************** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/firewall_config : Start firewalld if not already > started] *** > ok: [virtnodetest-0-2] > ok: [virtnodetest-0-1] > ok: [virtnodetest-0-0] > > TASK [gluster.infra/roles/firewall_config : check if required variables > are set] *** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/firewall_config : Open/Close firewalld ports] > ******** > ok: [virtnodetest-0-2] => (item=2049/tcp) > ok: [virtnodetest-0-1] => (item=2049/tcp) > ok: [virtnodetest-0-0] => (item=2049/tcp) > ok: [virtnodetest-0-2] => (item=54321/tcp) > ok: [virtnodetest-0-0] => (item=54321/tcp) > ok: [virtnodetest-0-1] => (item=54321/tcp) > ok: [virtnodetest-0-2] => (item=5900/tcp) > ok: [virtnodetest-0-1] => (item=5900/tcp) > ok: [virtnodetest-0-0] => (item=5900/tcp) > ok: [virtnodetest-0-2] => (item=5900-6923/tcp) > ok: [virtnodetest-0-0] => (item=5900-6923/tcp) > ok: [virtnodetest-0-1] => (item=5900-6923/tcp) > ok: [virtnodetest-0-2] => (item=5666/tcp) > ok: [virtnodetest-0-1] => (item=5666/tcp) > ok: [virtnodetest-0-0] => (item=5666/tcp) > ok: [virtnodetest-0-2] => (item=16514/tcp) > ok: [virtnodetest-0-1] => (item=16514/tcp) > ok: [virtnodetest-0-0] => (item=16514/tcp) > > TASK [gluster.infra/roles/firewall_config : Add/Delete services to > firewalld rules] *** > ok: [virtnodetest-0-1] => (item=glusterfs) > ok: [virtnodetest-0-0] => (item=glusterfs) > ok: [virtnodetest-0-2] => (item=glusterfs) > > TASK [gluster.infra/roles/backend_setup : Check if vdsm-python package is > installed or not] *** > changed: [virtnodetest-0-2] > changed: [virtnodetest-0-1] > changed: [virtnodetest-0-0] > > TASK [gluster.infra/roles/backend_setup : Remove the existing LVM filter] > ****** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Check that the multipath.conf > exists] *** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Ensure that multipathd services > is enabled if not] *** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Ensure that multipathd services > is running] *** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Create /etc/multipath/conf.d if > doesn't exists] *** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Get the UUID of the devices] > ********* > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Check that the blacklist.conf > exists] *** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Create blacklist template > content] *** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Add wwid to blacklist in > blacklist.conf file] *** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Reload multipathd] > ******************* > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Gather facts to determine the OS > distribution] *** > ok: [virtnodetest-0-1] > ok: [virtnodetest-0-0] > ok: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Change to Install lvm tools for > debian systems.] *** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Change to Install lvm tools for > RHEL systems.] *** > ok: [virtnodetest-0-2] > ok: [virtnodetest-0-1] > ok: [virtnodetest-0-0] > > TASK [gluster.infra/roles/backend_setup : Install python-yaml package for > Debian systems] *** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Initialize vdo_devs array] > *********** > ok: [virtnodetest-0-1] > ok: [virtnodetest-0-0] > ok: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Record VDO devices (if any)] > ********* > skipping: [virtnodetest-0-1] => (item={u'vgname': u'gluster_vg_sdb', > u'pvname': u'/dev/sdb'}) > skipping: [virtnodetest-0-0] => (item={u'vgname': u'gluster_vg_sdb', > u'pvname': u'/dev/sdb'}) > skipping: [virtnodetest-0-2] => (item={u'vgname': u'gluster_vg_sdb', > u'pvname': u'/dev/sdb'}) > > TASK [gluster.infra/roles/backend_setup : Configure lvm thinpool extend > threshold] *** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Configure lvm thinpool extend > percentage] *** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Check if vdo block device > exists] **** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Record for missing devices for > phase 2] *** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : set fact if it will at least > install 1 vdo device] *** > > TASK [gluster.infra/roles/backend_setup : Install VDO dependencies] > ************ > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : set fact about vdo installed > deps] *** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Enable and start vdo service] > ******** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Create VDO with specified size] > ****** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Set VDO maxDiscardSize as 16M] > ******* > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Stop VDO volumes] > ******************** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Start VDO volumes] > ******************* > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Check if valid disktype is > provided] *** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Set PV data alignment for JBOD] > ****** > ok: [virtnodetest-0-1] > ok: [virtnodetest-0-0] > ok: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Set PV data alignment for RAID] > ****** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Set VG physical extent size for > RAID] *** > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : include_tasks] > *********************** > included: > /etc/ansible/roles/gluster.infra/roles/backend_setup/tasks/get_vg_groupings.yml > for virtnodetest-0-1, virtnodetest-0-0, virtnodetest-0-2 > > TASK [gluster.infra/roles/backend_setup : Group devices by volume group > name, including existing devices] *** > ok: [virtnodetest-0-1] > ok: [virtnodetest-0-0] > ok: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Check if vg block device exists] > ***** > changed: [virtnodetest-0-0] => (item={u'key': u'gluster_vg_sdb', u'value': > [{u'vgname': u'gluster_vg_sdb', u'pvname': u'/dev/sdb'}]}) > changed: [virtnodetest-0-1] => (item={u'key': u'gluster_vg_sdb', u'value': > [{u'vgname': u'gluster_vg_sdb', u'pvname': u'/dev/sdb'}]}) > changed: [virtnodetest-0-2] => (item={u'key': u'gluster_vg_sdb', u'value': > [{u'vgname': u'gluster_vg_sdb', u'pvname': u'/dev/sdb'}]}) > > TASK [gluster.infra/roles/backend_setup : Filter none-existing devices] > ******** > ok: [virtnodetest-0-1] > ok: [virtnodetest-0-0] > ok: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Record for missing devices for > phase 2] *** > ok: [virtnodetest-0-1] => (item={u'stderr_lines': [], u'ansible_loop_var': > u'item', u'end': u'2021-05-13 12:18:33.575598', u'stderr': u'', u'stdout': > u'0', u'changed': True, u'failed': False, u'delta': u'0:00:00.009901', > u'cmd': u' test -b /dev/sdb && echo "1" || echo "0"; \n', u'item': > {u'value': [{u'vgname': u'gluster_vg_sdb', u'pvname': u'/dev/sdb'}], > u'key': u'gluster_vg_sdb'}, u'rc': 0, u'invocation': {u'module_args': > {u'warn': True, u'executable': None, u'_uses_shell': True, > u'strip_empty_ends': True, u'_raw_params': u' test -b /dev/sdb && echo "1" > || echo "0"; \n', u'removes': None, u'argv': None, u'creates': None, > u'chdir': None, u'stdin_add_newline': True, u'stdin': None}}, > u'stdout_lines': [u'0'], u'start': u'2021-05-13 12:18:33.565697'}) > ok: [virtnodetest-0-0] => (item={u'stderr_lines': [], u'ansible_loop_var': > u'item', u'end': u'2021-05-13 10:52:56.886693', u'stderr': u'', u'stdout': > u'0', u'changed': True, u'failed': False, u'delta': u'0:00:00.008123', > u'cmd': u' test -b /dev/sdb && echo "1" || echo "0"; \n', u'item': > {u'value': [{u'vgname': u'gluster_vg_sdb', u'pvname': u'/dev/sdb'}], > u'key': u'gluster_vg_sdb'}, u'rc': 0, u'invocation': {u'module_args': > {u'warn': True, u'executable': None, u'_uses_shell': True, > u'strip_empty_ends': True, u'_raw_params': u' test -b /dev/sdb && echo "1" > || echo "0"; \n', u'removes': None, u'argv': None, u'creates': None, > u'chdir': None, u'stdin_add_newline': True, u'stdin': None}}, > u'stdout_lines': [u'0'], u'start': u'2021-05-13 10:52:56.878570'}) > ok: [virtnodetest-0-2] => (item={u'stderr_lines': [], u'ansible_loop_var': > u'item', u'end': u'2021-05-13 12:25:24.420710', u'stderr': u'', u'stdout': > u'0', u'changed': True, u'failed': False, u'delta': u'0:00:00.007307', > u'cmd': u' test -b /dev/sdb && echo "1" || echo "0"; \n', u'item': > {u'value': [{u'vgname': u'gluster_vg_sdb', u'pvname': u'/dev/sdb'}], > u'key': u'gluster_vg_sdb'}, u'rc': 0, u'invocation': {u'module_args': > {u'warn': True, u'executable': None, u'_uses_shell': True, > u'strip_empty_ends': True, u'_raw_params': u' test -b /dev/sdb && echo "1" > || echo "0"; \n', u'removes': None, u'argv': None, u'creates': None, > u'chdir': None, u'stdin_add_newline': True, u'stdin': None}}, > u'stdout_lines': [u'0'], u'start': u'2021-05-13 12:25:24.413403'}) > > TASK [gluster.infra/roles/backend_setup : Create volume groups] > **************** > skipping: [virtnodetest-0-1] => (item={u'key': u'gluster_vg_sdb', > u'value': []}) > skipping: [virtnodetest-0-0] => (item={u'key': u'gluster_vg_sdb', > u'value': []}) > skipping: [virtnodetest-0-2] => (item={u'key': u'gluster_vg_sdb', > u'value': []}) > > TASK [gluster.infra/roles/backend_setup : update LVM fact's] > ******************* > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Check if thick-lv block devices > exists] *** > changed: [virtnodetest-0-0] => (item={u'lvname': u'gluster_lv_engine', > u'vgname': u'gluster_vg_sdb', u'size': u'150G'}) > changed: [virtnodetest-0-1] => (item={u'lvname': u'gluster_lv_engine', > u'vgname': u'gluster_vg_sdb', u'size': u'150G'}) > changed: [virtnodetest-0-2] => (item={u'lvname': u'gluster_lv_engine', > u'vgname': u'gluster_vg_sdb', u'size': u'150G'}) > > TASK [gluster.infra/roles/backend_setup : Record for missing devices for > phase 2] *** > skipping: [virtnodetest-0-1] => (item={u'stderr_lines': [], > u'ansible_loop_var': u'item', u'end': u'2021-05-13 12:18:37.528159', > u'stderr': u'', u'stdout': u'1', u'changed': True, u'failed': False, > u'delta': u'0:00:00.010032', u'cmd': u' echo "1" \n', u'item': {u'lvname': > u'gluster_lv_engine', u'vgname': u'gluster_vg_sdb', u'size': u'150G'}, > u'rc': 0, u'invocation': {u'module_args': {u'warn': True, u'executable': > None, u'_uses_shell': True, u'strip_empty_ends': True, u'_raw_params': u' > echo "1" \n', u'removes': None, u'argv': None, u'creates': None, u'chdir': > None, u'stdin_add_newline': True, u'stdin': None}}, u'stdout_lines': > [u'1'], u'start': u'2021-05-13 12:18:37.518127'}) > skipping: [virtnodetest-0-0] => (item={u'stderr_lines': [], > u'ansible_loop_var': u'item', u'end': u'2021-05-13 10:53:00.863436', > u'stderr': u'', u'stdout': u'1', u'changed': True, u'failed': False, > u'delta': u'0:00:00.007459', u'cmd': u' echo "1" \n', u'item': {u'lvname': > u'gluster_lv_engine', u'vgname': u'gluster_vg_sdb', u'size': u'150G'}, > u'rc': 0, u'invocation': {u'module_args': {u'warn': True, u'executable': > None, u'_uses_shell': True, u'strip_empty_ends': True, u'_raw_params': u' > echo "1" \n', u'removes': None, u'argv': None, u'creates': None, u'chdir': > None, u'stdin_add_newline': True, u'stdin': None}}, u'stdout_lines': > [u'1'], u'start': u'2021-05-13 10:53:00.855977'}) > skipping: [virtnodetest-0-2] => (item={u'stderr_lines': [], > u'ansible_loop_var': u'item', u'end': u'2021-05-13 12:25:28.261106', > u'stderr': u'', u'stdout': u'1', u'changed': True, u'failed': False, > u'delta': u'0:00:00.007818', u'cmd': u' echo "1" \n', u'item': {u'lvname': > u'gluster_lv_engine', u'vgname': u'gluster_vg_sdb', u'size': u'150G'}, > u'rc': 0, u'invocation': {u'module_args': {u'warn': True, u'executable': > None, u'_uses_shell': True, u'strip_empty_ends': True, u'_raw_params': u' > echo "1" \n', u'removes': None, u'argv': None, u'creates': None, u'chdir': > None, u'stdin_add_newline': True, u'stdin': None}}, u'stdout_lines': > [u'1'], u'start': u'2021-05-13 12:25:28.253288'}) > > TASK [gluster.infra/roles/backend_setup : include_tasks] > *********************** > included: > /etc/ansible/roles/gluster.infra/roles/backend_setup/tasks/get_vg_groupings.yml > for virtnodetest-0-1, virtnodetest-0-0, virtnodetest-0-2 > > TASK [gluster.infra/roles/backend_setup : Group devices by volume group > name, including existing devices] *** > ok: [virtnodetest-0-1] > ok: [virtnodetest-0-0] > ok: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Check if vg block device exists] > ***** > > TASK [gluster.infra/roles/backend_setup : Filter none-existing devices] > ******** > ok: [virtnodetest-0-1] > ok: [virtnodetest-0-0] > ok: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Make sure thick pvs exists in > volume group] *** > > TASK [gluster.infra/roles/backend_setup : update LVM fact's] > ******************* > skipping: [virtnodetest-0-1] > skipping: [virtnodetest-0-0] > skipping: [virtnodetest-0-2] > > TASK [gluster.infra/roles/backend_setup : Create thick logical volume] > ********* > failed: [virtnodetest-0-1] (item={u'lvname': u'gluster_lv_engine', > u'vgname': u'gluster_vg_sdb', u'size': u'150G'}) => {"ansible_index_var": > "index", "ansible_loop_var": "item", "changed": false, "err": " WARNING: > Device for PV gx6iUE-369Z-3FDP-aRUQ-Wur0-1Xhf-v4g79j not found or rejected > by a filter.\n Volume group \"gluster_vg_sdb\" not found\n Cannot process > volume group gluster_vg_sdb\n", "index": 0, "item": {"lvname": > "gluster_lv_engine", "size": "150G", "vgname": "gluster_vg_sdb"}, "msg": > "Volume group gluster_vg_sdb does not exist.", "rc": 5} > failed: [virtnodetest-0-0] (item={u'lvname': u'gluster_lv_engine', > u'vgname': u'gluster_vg_sdb', u'size': u'150G'}) => {"ansible_index_var": > "index", "ansible_loop_var": "item", "changed": false, "err": " Volume > group \"gluster_vg_sdb\" not found\n Cannot process volume group > gluster_vg_sdb\n", "index": 0, "item": {"lvname": "gluster_lv_engine", > "size": "150G", "vgname": "gluster_vg_sdb"}, "msg": "Volume group > gluster_vg_sdb does not exist.", "rc": 5} > failed: [virtnodetest-0-2] (item={u'lvname': u'gluster_lv_engine', > u'vgname': u'gluster_vg_sdb', u'size': u'150G'}) => {"ansible_index_var": > "index", "ansible_loop_var": "item", "changed": false, "err": " Volume > group \"gluster_vg_sdb\" not found\n Cannot process volume group > gluster_vg_sdb\n", "index": 0, "item": {"lvname": "gluster_lv_engine", > "size": "150G", "vgname": "gluster_vg_sdb"}, "msg": "Volume group > gluster_vg_sdb does not exist.", "rc": 5} > > NO MORE HOSTS LEFT > ************************************************************* > > NO MORE HOSTS LEFT > ************************************************************* > > PLAY RECAP > ********************************************************************* > virtnodetest-0-0 : ok=19 changed=3 unreachable=0 > failed=1 skipped=41 rescued=0 ignored=0 > virtnodetest-0-1 : ok=20 changed=4 unreachable=0 > failed=1 skipped=41 rescued=0 ignored=0 > virtnodetest-0-2 : ok=19 changed=3 unreachable=0 > failed=1 skipped=41 rescued=0 ignored=0 > > Please check /var/log/cockpit/ovirt-dashboard/gluster-deployment.log for > more informations. > ====================================================================== > > How can we resolve this issue? > _______________________________________________ > Users mailing list -- [email protected] > To unsubscribe send an email to [email protected] > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/[email protected]/message/3J3GA4SWOISUR57TDJIA7IZ2CLGCCFZR/ >
_______________________________________________ Users mailing list -- [email protected] To unsubscribe send an email to [email protected] Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/[email protected]/message/3S5Q66ZVCEGQGDKZQMU7ELVOQFTTCMDA/
