Hello,
I used the cluster upgrade feature that moves hosts in maintenance one by
one.
This is not a HCI cluster, my storage is on iSCSI multipath
I managed to fully upgrade the 1st hosts after rebooting and fixing some
network/iSCSI errors.
However, now the second one is stuck at upgrading the ovirt-node layers too
but I can not succeed in upgrading that one.
On this 2nd host, the workaround of removing and reinstalling
ovirt-node-ng-image-update doesn't work. I only get the following error :
[root@ps-inf-prd-kvm-fr-511 ~]# nodectl check
Status: OK
Bootloader ... OK
Layer boot entries ... OK
Valid boot entries ... OK
Mount points ... OK
Separate /var ... OK
Discard is used ... OK
Basic storage ... OK
Initialized VG ... OK
Initialized Thin Pool ... OK
Initialized LVs ... OK
Thin storage ... OK
Checking available space in thinpool ... OK
Checking thinpool auto-extend ... OK
vdsmd ... OK
[root@ps-inf-prd-kvm-fr-511 ~]# nodectl info
bootloader:
default: ovirt-node-ng-4.4.5.1-0.20210323.0 (4.18.0-240.15.1.el8_3.x86_64)
entries:
ovirt-node-ng-4.4.5.1-0.20210323.0 (4.18.0-240.15.1.el8_3.x86_64):
index: 0
kernel:
/boot//ovirt-node-ng-4.4.5.1-0.20210323.0+1/vmlinuz-4.18.0-240.15.1.el8_3.x86_64
args: resume=/dev/mapper/onn-swap
rd.lvm.lv=onn/ovirt-node-ng-4.4.5.1-0.20210323.0+1
rd.lvm.lv=onn/swap rhgb quiet
boot=UUID=a676b18f-0f1b-4ad4-88e1-533fe61ff063 rootflags=discard
img.bootid=ovirt-node-ng-4.4.5.1-0.20210323.0+1 intel_iommu=on
root: /dev/onn/ovirt-node-ng-4.4.5.1-0.20210323.0+1
initrd:
/boot//ovirt-node-ng-4.4.5.1-0.20210323.0+1/initramfs-4.18.0-240.15.1.el8_3.x86_64.img
title: ovirt-node-ng-4.4.5.1-0.20210323.0
(4.18.0-240.15.1.el8_3.x86_64)
blsid:
ovirt-node-ng-4.4.5.1-0.20210323.0+1-4.18.0-240.15.1.el8_3.x86_64
layers:
ovirt-node-ng-4.4.5.1-0.20210323.0:
ovirt-node-ng-4.4.5.1-0.20210323.0+1
current_layer: ovirt-node-ng-4.4.5.1-0.20210323.0+1
[root@ps-inf-prd-kvm-fr-511 ~]# yum remove ovirt-node-ng-image-update
[...]
Removing:
ovirt-node-ng-image-update noarch
4.4.6.3-1.el8
@ovirt-4.4 886 M
Erasing : ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch
Verifying : ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch
Unpersisting: ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch.rpm
Removed:
ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch
Complete!
[root@ps-inf-prd-kvm-fr-511 ~]#
[root@ps-inf-prd-kvm-fr-511 ~]# yum install ovirt-node-ng-image-update
[...]
Installing:
ovirt-node-ng-image-update noarch
4.4.6.3-1.el8
ovirt-4.4 887 M
[...]
ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch.rpm
23 MB/s | 887 MB 00:39
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
Preparing :
Running scriptlet: ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch
Installing : ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch
Running scriptlet: ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch
*warning: %post(ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch) scriptlet
failed, exit status 1*
*Error in POSTIN scriptlet in rpm package ovirt-node-ng-image-update *
Verifying : ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch
Installed:
ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch
Complete!
[root@ps-inf-prd-kvm-fr-511 ~]#
[root@ps-inf-prd-kvm-fr-511 ~]# nodectl info
bootloader:
default: ovirt-node-ng-4.4.5.1-0.20210323.0 (4.18.0-240.15.1.el8_3.x86_64)
entries:
ovirt-node-ng-4.4.5.1-0.20210323.0 (4.18.0-240.15.1.el8_3.x86_64):
index: 0
kernel:
/boot//ovirt-node-ng-4.4.5.1-0.20210323.0+1/vmlinuz-4.18.0-240.15.1.el8_3.x86_64
args: resume=/dev/mapper/onn-swap
rd.lvm.lv=onn/ovirt-node-ng-4.4.5.1-0.20210323.0+1
rd.lvm.lv=onn/swap rhgb quiet
boot=UUID=a676b18f-0f1b-4ad4-88e1-533fe61ff063 rootflags=discard
img.bootid=ovirt-node-ng-4.4.5.1-0.20210323.0+1 intel_iommu=on
root: /dev/onn/ovirt-node-ng-4.4.5.1-0.20210323.0+1
initrd:
/boot//ovirt-node-ng-4.4.5.1-0.20210323.0+1/initramfs-4.18.0-240.15.1.el8_3.x86_64.img
title: ovirt-node-ng-4.4.5.1-0.20210323.0
(4.18.0-240.15.1.el8_3.x86_64)
blsid:
ovirt-node-ng-4.4.5.1-0.20210323.0+1-4.18.0-240.15.1.el8_3.x86_64
layers:
ovirt-node-ng-4.4.5.1-0.20210323.0:
ovirt-node-ng-4.4.5.1-0.20210323.0+1
current_layer: ovirt-node-ng-4.4.5.1-0.20210323.0+1
[root@ps-inf-prd-kvm-fr-511 ~]#
Is there any way to see where in the POSTIN scriplet the installation fails?
Guillaume Pavese
Ingénieur Système et Réseau
Interactiv-Group
On Fri, Jun 4, 2021 at 8:44 PM Lev Veyde <lve...@redhat.com> wrote:
> Hi Guillaume,
>
> Have you moved the host to the maintenance before the upgrade (making sure
> that Gluster related options are unchecked)?
>
> Or you started the upgrade directly?
>
> Thanks in advance,
>
> On Thu, Jun 3, 2021 at 10:50 AM wodel youchi <wodel.you...@gmail.com>
> wrote:
>
>> Hi,
>>
>> Is this an hci deployment?
>>
>> If yes :
>>
>> - try to boot using the old version 4.4.5
>> - verify that your network configuration is still intact
>> - verify that the gluster part is working properly
>> # gluster peer status
>> # gluster volume status
>>
>> - verify the your engine and your host can resolve each other hostname
>>
>> If all is ok try to bring the host at available state
>>
>>
>> Regards.
>>
>> Le mer. 2 juin 2021 08:21, Guillaume Pavese <
>> guillaume.pav...@interactiv-group.com> a écrit :
>>
>>> Maybe my problem is in part linked to an issue seen by Jayme earlier,
>>> but then the resolution that worked for him did not succeed for me :
>>>
>>> I first upgraded my Self Hosted Engine from 4.4.5 to 4.4.6 and then
>>> upgraded it to Centos-Stream and rebooted
>>>
>>> Then I tried to upgrade the cluster (3 ovirt-nodes on 4.4.5) but it
>>> failed at the first host.
>>> They are all ovir-node hosts, originally first installed in 4.4.5
>>>
>>> In Host Event Logs I saw :
>>>
>>> ...
>>> Update of host ps-inf-prd-kvm-fr-510.hostics.fr.
>>> Upgrade packages
>>> Update of host ps-inf-prd-kvm-fr-510.hostics.fr.
>>> Check if image was updated.
>>> Update of host ps-inf-prd-kvm-fr-510.hostics.fr.
>>> Check if image was updated.
>>> Update of host ps-inf-prd-kvm-fr-510.hostics.fr.
>>> Check if image-updated file exists.
>>> Failed to upgrade Host ps-inf-prd-kvm-fr-510.hostics.fr (User:
>>> g...@hostics.fr).
>>>
>>>
>>>
>>> ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch was installed according
>>> to yum,
>>> I tried reinstalling it but got errors: "Error in POSTIN scriptlet" :
>>>
>>> Downloading Packages:
>>> [SKIPPED] ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch.rpm: Already
>>> downloaded
>>> ...
>>> Running scriptlet: ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch
>>>
>>> Reinstalling : ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch
>>>
>>> Running scriptlet: ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch
>>>
>>> warning: %post(ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch)
>>> scriptlet failed, exit status 1
>>>
>>> Error in POSTIN scriptlet in rpm package ovirt-node-ng-image-update
>>> ---
>>> Reinstalled:
>>> ovirt-node-ng-image-update-4.4.6.3-1.el8.noarch
>>>
>>>
>>>
>>> nodectl still showed it was on 4.4.5 :
>>>
>>> [root@ps-inf-prd-kvm-fr-510 ~]# nodectl info
>>> bootloader:
>>> default: ovirt-node-ng-4.4.5.1-0.20210323.0
>>> (4.18.0-240.15.1.el8_3.x86_64)
>>> ...
>>> current_layer: ovirt-node-ng-4.4.5.1-0.20210323.0+1
>>>
>>>
>>>
>>> I tried to upgrade the Host again from oVirt and this time there was no
>>> error, and the host rebooted.
>>> However, it did not pass active after rebooting and nodectl still shows
>>> that it's 4.4.5 installed. Similar symptoms as OP
>>>
>>> So I removed ovirt-node-ng-image-update, then reinstalled it and got no
>>> error this time.
>>> nodectl info seemed to show that it was installed :
>>>
>>>
>>> [root@ps-inf-prd-kvm-fr-510 yum.repos.d]# nodectl info
>>> bootloader:
>>> default: ovirt-node-ng-4.4.6.3-0.20210518.0 (4.18.0-301.1.el8.x86_64)
>>> ...
>>> current_layer: ovirt-node-ng-4.4.5.1-0.20210323.0+1
>>>
>>>
>>> However, after reboot the Host was still shown as "unresponsive"
>>> After Marking it as "Manually rebooted", passing it in maintenance mode
>>> and trying to activate it, the Host was automatically fenced. And still
>>> unresponsive after this new reboot.
>>>
>>> I passed it in maintenance mode again, And tried to reinstall it with
>>> "Deploy Hosted Engine" selected
>>> However if failed : "Task Stop services failed to execute."
>>>
>>> In
>>> /var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20210602082519-ps-inf-prd-kvm-fr-510.hostics.fr-0565d681-9406-4fa7-a444-7ee34804579c.log
>>> :
>>>
>>> "msg" : "Unable to stop service vdsmd.service: Job for vdsmd.service
>>> canceled.\n", "failed" : true,
>>>
>>> "msg" : "Unable to stop service supervdsmd.service: Job for
>>> supervdsmd.service canceled.\n", failed" : true,
>>>
>>> "stderr" : "Error: ServiceOperationError: _systemctlStop failed\nb'Job
>>> for vdsmd.service canceled.\\n' ",
>>>
>>> "stderr_lines" : [ "Error: ServiceOperationError: _systemctlStop
>>> failed", "b'Job for vdsmd.service canceled.\\n' " ],
>>>
>>>
>>> If I try on the Host I get :
>>>
>>> [root@ps-inf-prd-kvm-fr-510 ~]# systemctl stop vdsmd
>>> Job for vdsmd.service canceled.
>>>
>>> [root@ps-inf-prd-kvm-fr-510 ~]# systemctl status vdsmd
>>> ● vdsmd.service - Virtual Desktop Server Manager
>>> Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled;
>>> vendor preset: disabled)
>>> Active: deactivating (stop-sigterm) since Wed 2021-06-02 08:49:21
>>> CEST; 7s ago
>>> Process: 54037 ExecStartPre=/usr/libexec/vdsm/vdsmd_init_common.sh
>>> --pre-start (code=exited, status=0/SUCCESS)
>>> ...
>>>
>>> Jun 02 08:47:34 ps-inf-prd-kvm-fr-510.hostics.fr vdsm[54100]: WARN
>>> Failed to retrieve Hosted Engine HA info, is Hosted Engine setup finished?
>>> ...
>>> Jun 02 08:48:31 ps-inf-prd-kvm-fr-510.hostics.fr vdsm[54100]: WARN
>>> Worker blocked: <Worker name=jsonrpc/4 running <Task <JsonRpcTask
>>> {'jsonrpc': '2.0', 'method': 'StoragePool.connectStorageServer', 'params':
>>> {'storage>
>>> File:
>>> "/usr/lib64/python3.6/threading.py", line 884, in _bootstrap
>>>
>>> self._bootstrap_inner()
>>>
>>>
>>>
>>> Retrying to manually stop vdsmd a second time then seems to work...
>>> I tried rebooting again, restarting the install always fail at the the
>>> same spot
>>>
>>> What should I try to get this host back up?
>>>
>>>
>>>
>>> Guillaume Pavese
>>> Ingénieur Système et Réseau
>>> Interactiv-Group
>>>
>>> Ce message et toutes les pièces jointes (ci-après le “message”) sont
>>> établis à l’intention exclusive de ses destinataires et sont confidentiels.
>>> Si vous recevez ce message par erreur, merci de le détruire et d’en avertir
>>> immédiatement l’expéditeur. Toute utilisation de ce message non conforme a
>>> sa destination, toute diffusion ou toute publication, totale ou partielle,
>>> est interdite, sauf autorisation expresse. L’internet ne permettant pas
>>> d’assurer l’intégrité de ce message . Interactiv-group (et ses filiales)
>>> décline(nt) toute responsabilité au titre de ce message, dans l’hypothèse
>>> ou il aurait été modifié. IT, ES, UK.
>>> <https://interactiv-group.com/disclaimer.html>
>>> _______________________________________________
>>> Users mailing list -- users@ovirt.org
>>> To unsubscribe send an email to users-le...@ovirt.org
>>> Privacy Statement: https://www.ovirt.org/privacy-policy.html
>>> oVirt Code of Conduct:
>>> https://www.ovirt.org/community/about/community-guidelines/
>>> List Archives:
>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZB2CLJYXO6SX53XLQAPTXEK7JKZQVPSW/
>>>
>> _______________________________________________
>> Users mailing list -- users@ovirt.org
>> To unsubscribe send an email to users-le...@ovirt.org
>> Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives:
>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/TX2CUCG6DDSPUQMHABWM6LZDEVOODGJI/
>>
>
>
> --
>
> Lev Veyde
>
> Senior Software Engineer, RHCE | RHCVA | MCITP
>
> Red Hat Israel
>
> <https://www.redhat.com>
>
> l...@redhat.com | lve...@redhat.com
> <https://red.ht/sig>
> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
>
--
Ce message et toutes les pièces jointes (ci-après le “message”) sont
établis à l’intention exclusive de ses destinataires et sont confidentiels.
Si vous recevez ce message par erreur, merci de le détruire et d’en avertir
immédiatement l’expéditeur. Toute utilisation de ce message non conforme a
sa destination, toute diffusion ou toute publication, totale ou partielle,
est interdite, sauf autorisation expresse. L’internet ne permettant pas
d’assurer l’intégrité de ce message . Interactiv-group (et ses filiales)
décline(nt) toute responsabilité au titre de ce message, dans l’hypothèse
ou il aurait été modifié. IT, ES, UK.
<https://interactiv-group.com/disclaimer.html>
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/Q3RYE4KCAJ3CPRKQCTF4V24HPMVKG6DQ/
