Check if you have gluster-selinux rpm installed.

Best Regards,Strahil Nikolov
 
 
  On Tue, Nov 2, 2021 at 8:05, [email protected]<[email protected]> 
wrote:   Hello everyone. First time posting. Sorry if this is already been 
spoken to... I didn't see anything with a quick search that I did. 

3 nodes running dual E5-2600 series V4 CPUs with 256G memory in a Hybrid 
storage config.  2x 1.9TB SSDs and 6x 600G SAS spinners attached to a SAS/SATA 
HBA. 4x 1G ports. 
During initial boot from the 4.4.8. ISO oVirt installer I set static IPs, added 
DNS entries and copied ssh keys copied to each host.

First issue with deploying the cluster was complaining about partitions found 
on sdb even though I reclaimed and deleted everything on all drives. Ended up 
zero'ing the drives and started over. Then sdb was on the filter list. So I 
edited the LVM.conf file.  now I am stuck on "Gluster brick_t is invalid, must 
be a file or device"  No idea what to do about that one. 

 Also, I am not sure if its actually pulling in the 600G 10k drives into the 
mix at all.  How would I confirm this?

First 1.9TB SSD drive Is where I am installing the OS.  Should I change this to 
some other drive or usb stick and have the 2x SSDs as cache and all spinners as 
capacity data?  not sure how all that is supposed to work as I am not too 
familiar with Gluster. 

I know Nutanix and vSAN pretty well.  I wanted to try oVirt.  I am having a 
MUCH harder time with initial setup.  I appreciate any help / suggestions on 
best practice for my hardware setup. 
_______________________________________________
Users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/[email protected]/message/W4AATE4UKLN5PLTV6RPAUMIIEWDE6KYX/
  
_______________________________________________
Users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/[email protected]/message/HOTJHW7VE6GF4GTTHCYUOJNRY55SHNY5/

Reply via email to