Thanks everyone for helping me through the last issue I had. Once I changed
bonding mode to 2, everything worked.
However, now I have another issue.
I'm trying to install this using fibre channel storage. I set up a new lun
from my storage array, assigned it to my host, and configured multipathing.
All looks good. Then, when I ran the install script, I got the following error:
[ ERROR ] ovirtsdk4.Error: Fault reason is "Operation Failed". Fault detail is
"[Physical device initialization failed. Please check that the device is empty
and accessible by the host.]". HTTP response code is 400.[ ERROR ] fatal:
[localhost]: FAILED! => {"changed": false, "msg": "Fault reason is \"Operation
Failed\". Fault detail is \"[Physical device initialization failed. Please
check that the device is empty and accessible by the host.]\". HTTP response
code is 400."}
Google says that's because the lun is dirty - maybe reused. I tried doing the
suggested - I used dd to write all zeroes to the lun. I used wipefs on the
lun. I deleted the lun from the array and created a new one. No matter what I
did with that lun, it's still showing up with this error.
I then created a second LUN. I mapped it to the host, and attempted to use
that lun for storage - and it worked!
There must be a dirty config somewhere on this thing that I need to clean up
from that first lun.
Anybody know what I might have to clean up on this host to clear out that old
config?_______________________________________________
Users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/[email protected]/message/CTFW546WOEVCDZ4C7EZMDLROQ7IKUOU6/
