Can you cat this file
/etc/ansible/roles/gluster.infra/roles/backend_setup/tasks/vg_create.yml
It seems that the VG creation is not idempotent .As a workaround, delete the VG
'gluster_vg_sdb' on all Gluster nodes:
vgremove gluster_vg_sdb
Best Regards,Strahil Nikolov
Hello all,
I am hoping someone can help me with a oVirt installation that has just gotten
the better of me after weeks of trying.
After setting up ssh-keys and making sure each host is known to the primary
host (sr-svr04), I go though Cockpit and "Configure Gluster storage and oVirt
hosted engine", enter all of the details with
<host>.san.lennoxconsulting.com.au for the storage network FQDN and
<host>.core.lennoxconsulting.com.au for the public interfaces. Connectivity on
each of the VLAN's test out as basically working (everything is pingable and
ssh connections work) and the hosts are generally usable on the network.
But the install ultimately dies with the following ansible error:
----------- gluster-deployment.log ---------
:
:
TASK [gluster.infra/roles/backend_setup : Create volume groups] ****************
task path:
/etc/ansible/roles/gluster.infra/roles/backend_setup/tasks/vg_create.yml:63
failed: [sr-svr04.san.lennoxconsulting.com.au] (item={'key': 'gluster_vg_sdb',
'value': [{'vgname': 'gluster_vg_sdb', 'pvname': '/dev/sdb'}]}) =>
{"ansible_loop_var": "item", "changed": true, "cmd": ["vgcreate",
"--dataalignment", "1536K", "-s", "1536K", "gluster_vg_sdb", "/dev/sdb"],
"delta": "0:00:00.058528", "end": "2022-07-16 16:18:37.018563", "item": {"key":
"gluster_vg_sdb", "value": [{"pvname": "/dev/sdb", "vgname":
"gluster_vg_sdb"}]}, "msg": "non-zero return code", "rc": 5, "start":
"2022-07-16 16:18:36.960035", "stderr": " A volume group called gluster_vg_sdb
already exists.", "stderr_lines": [" A volume group called gluster_vg_sdb
already exists."], "stdout": "", "stdout_lines": []}
failed: [sr-svr05.san.lennoxconsulting.com.au] (item={'key': 'gluster_vg_sdb',
'value': [{'vgname': 'gluster_vg_sdb', 'pvname': '/dev/sdb'}]}) =>
{"ansible_loop_var": "item", "changed": true, "cmd": ["vgcreate",
"--dataalignment", "1536K", "-s", "1536K", "gluster_vg_sdb", "/dev/sdb"],
"delta": "0:00:00.057186", "end": "2022-07-16 16:18:37.784063", "item": {"key":
"gluster_vg_sdb", "value": [{"pvname": "/dev/sdb", "vgname":
"gluster_vg_sdb"}]}, "msg": "non-zero return code", "rc": 5, "start":
"2022-07-16 16:18:37.726877", "stderr": " A volume group called gluster_vg_sdb
already exists.", "stderr_lines": [" A volume group called gluster_vg_sdb
already exists."], "stdout": "", "stdout_lines": []}
failed: [sr-svr06.san.lennoxconsulting.com.au] (item={'key': 'gluster_vg_sdb',
'value': [{'vgname': 'gluster_vg_sdb', 'pvname': '/dev/sdb'}]}) =>
{"ansible_loop_var": "item", "changed": true, "cmd": ["vgcreate",
"--dataalignment", "1536K", "-s", "1536K", "gluster_vg_sdb", "/dev/sdb"],
"delta": "0:00:00.062212", "end": "2022-07-16 16:18:37.250371", "item": {"key":
"gluster_vg_sdb", "value": [{"pvname": "/dev/sdb", "vgname":
"gluster_vg_sdb"}]}, "msg": "non-zero return code", "rc": 5, "start":
"2022-07-16 16:18:37.188159", "stderr": " A volume group called gluster_vg_sdb
already exists.", "stderr_lines": [" A volume group called gluster_vg_sdb
already exists."], "stdout": "", "stdout_lines": []}
NO MORE HOSTS LEFT *************************************************************
NO MORE HOSTS LEFT *************************************************************
PLAY RECAP *********************************************************************
sr-svr04.san.lennoxconsulting.com.au : ok=32 changed=13 unreachable=0
failed=1 skipped=27 rescued=0 ignored=1
sr-svr05.san.lennoxconsulting.com.au : ok=31 changed=12 unreachable=0
failed=1 skipped=27 rescued=0 ignored=1
sr-svr06.san.lennoxconsulting.com.au : ok=31 changed=12 unreachable=0
failed=1 skipped=27 rescued=0 ignored=1
----------- gluster-deployment.log ---------
A "gluster v status" gives me no volumes present and that is where I am stuck!
Any ideas of what I start trying next?
I have tried this with oVirt Node 4.5.1 el8 and el9 images as well as 4.5 el8
images so it has got to be somewhere in my infrastructure configuration but I
am out of ideas.
My hardware configuration is 3 x HP DL360's with oVirt Node 4.5.1 el8 installed
on 2x146gb RAID1 array and a gluster 6x900gb RAID5 array.
Network configuration is:
root@sr-svr04 ~]# ip addr show up
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0
state UP group default qlen 1000
link/ether 1c:98:ec:29:41:68 brd ff:ff:ff:ff:ff:ff
3: eno2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0
state UP group default qlen 1000
link/ether 1c:98:ec:29:41:68 brd ff:ff:ff:ff:ff:ff permaddr
1c:98:ec:29:41:69
4: eno3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group
default qlen 1000
link/ether 1c:98:ec:29:41:6a brd ff:ff:ff:ff:ff:ff
5: eno4: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group
default qlen 1000
link/ether 1c:98:ec:29:41:6b brd ff:ff:ff:ff:ff:ff
6: eno3.3@eno3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UP group default qlen 1000
link/ether 1c:98:ec:29:41:6a brd ff:ff:ff:ff:ff:ff
inet 192.168.3.11/24 brd 192.168.3.255 scope global noprefixroute eno3.3
valid_lft forever preferred_lft forever
inet6 fe80::ec:d7be:760e:8eda/64 scope link noprefixroute
valid_lft forever preferred_lft forever
7: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UP group default qlen 1000
link/ether 1c:98:ec:29:41:68 brd ff:ff:ff:ff:ff:ff
8: bond0.4@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP group default qlen 1000
link/ether 1c:98:ec:29:41:68 brd ff:ff:ff:ff:ff:ff
inet 192.168.4.11/24 brd 192.168.4.255 scope global noprefixroute bond0.4
valid_lft forever preferred_lft forever
inet6 fe80::f503:a54:8421:ea8b/64 scope link noprefixroute
valid_lft forever preferred_lft forever
9: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state
DOWN group default qlen 1000
link/ether 52:54:00:5b:fd:ac brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever
The public network is core.lennoxconsulting.com.au which is 192.168.4.0/24 and
the storage network is san.lennoxconsulting.com.au which is 192.168.3.0/24
Any help to move forward please is appreciated.
- Dave.
_______________________________________________
Users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/[email protected]/message/ZCJASQR3EV4AOFSJX562A3WSBWXLRMJE/
_______________________________________________
Users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/[email protected]/message/S36MFMKRMZLAYRZATM5D6JPT33CUPDBZ/
