Hi,
I went through a similar ordeal half a year ago and forgot all the exact
procedures already but for me, in the end after following all the guides
and replacing the "standard" certs
it was either engine.p12 or apache.p12 keystore that also had outdated
certs (apparently mTLS is being used!).
Updating these keystores is not documented anywhere. No idea if you are
in the same situation but wanted to throw this out there.
Best regards, cen
On 4. 08. 23 20:12, Jason P. Thomas wrote:
I updated the VDSM certs on the hosts and the apache cert on the
engine. I'm guessing something is wrong with however the engine
interacts with vdsm, I just don't know exactly what to do about it.
Jason
On 8/4/23 14:00, Derek Atkins wrote:
Sounds like the Host Certs need to be updated.. Or possibly even the
Engine CA Cert.
-derek
On Fri, August 4, 2023 1:45 pm, Jason P. Thomas wrote:
Konstantin,
Right after I sent the email I got the engine running. The
libvirt-spice certs had incorrect ownership. It still is not
connecting
to anything. Error in Events on the Engine is now: "VDSM
<hostname.fqdn> command Get Host Capabilities failed: General SSLEngine
problem"
So status right now is, all VMs are running. Engine web ui is
accessible. Engine shows all hosts as unassigned or Connecting or
NonResponsive with repeated entries of the above error in Events.
Sincerely,
Jason
On 8/4/23 13:08, konstantin.volenbovskyi--- via Users wrote:
Now the engine won't start at all and I'm afraid I'm one power outage
away from complete disaster. I need to keep the old location up and
functioning for another 4-6 months, so any insights would be greatly
appreciated.
Hi,
'engine won't start at all' can mean two things:
1) OS can't boot and thus you can't do SSH. Assuming that we are
talking
self-hosted engine, then you need to use command like below on host
that
runs ovengine VM (virsh -c
qemu:///system?authfile=/etc/ovirt-hosted-engine/virsh_auth.conf list
and hosted-engine --vm-status might be helpful, VM should at least
start
to boot in order for you to achieve connectivity via console):
hosted-engine --add-console-password --password=somepassword
and then connect via VNC to IP that you will see in output and
password
that you used
2) ovirt-engine service can't start
In that case it is likely that you will find reason of that in
journalctl -u ovirt-engine --no-pager
(/var/log/ovirt-engine/engine.log)
BR,
Konstantin
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/PL4Q64G6IFUUW5TYVJWSMMIMXHBT3SSD/
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/H3M4O4TN67NZZPVXGPTO6CEBFEM47LET/
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/3GFW2SRSZB5QHNY3ABXG2KPQ6ZA36M5I/
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/AMVZEWY45QHPEDHJQZGJMZWESN2RZBPB/