I have a gluster volume that was created using an older version 4.x of oVirt.  
This was so long ago I am not sure I remember how I did it except that I used 
the wizard and the built in ansible job.  I recently rebuilt my system that is 
hyperconverged.  The storage raid array (hardware backed) is in my hypervisor.  
The engine is a stand alone external device.  I am now at ver 4.5.7 of Ovirt.  
I want to add my gluster brick back into the setup.  I have reviewed the wiki 
notes but they presume a new build, not my scenario.  From what I read and 
researched, I think I need to create a distributed brick.  How do you do that 
with just a single system when there is no replication to other hosts?   Can 
anyone share a general procedure?

##DIAGNOSTICS
[root@vmh /]# mount
...
/dev/mapper/gluster_vg_sda-gluster_lv_vmstore on /gluster_bricks/vmstore type 
xfs 
(rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=256k,sunit=512,swidth=2048,noquota)

[root@vmh /]# tail -n 1 /etc/fstab
/dev/mapper/gluster_vg_sda-gluster_lv_vmstore /gluster_bricks/vmstore xfs 
defaults 0 0

[root@vmh /]# gluster volume create vmstore 
vmh.tourville.org:/gluster_bricks/vmstore
volume create: vmstore: failed: The brick 
vmh.tourville.org:/gluster_bricks/vmstore is a mount point. Please create a 
sub-directory under the mount point and use that as the brick directory. Or use 
'force' at the end of the command if you want to override this behavior.

[root@vmh /]# gluster volume create vmstore 
vmh.tourville.org:/gluster_bricks/vmstore/vmstore
volume create: vmstore: failed: /gluster_bricks/vmstore/vmstore is already part 
of a volume

[root@vmh /]# tree /gluster_bricks/
/gluster_bricks/
└── vmstore
    └── vmstore
        └── 42c329c3-8eca-4748-af7a-f48aca494d72
            ├── dom_md
            │   ├── ids
            │   ├── inbox
            │   ├── leases
            │   ├── metadata
            │   ├── outbox
            │   └── xleases
            ├── images
            │   ├── 019f828b-8f5d-47cf-bccd-7044402e7dd8
...

Do I need to force creation at this point?  I just want to proceed cautiously 
at this point as I am not super confident with gluster.
IE- [root@vmh /]# gluster volume create vmstore 
vmh.tourville.org:/gluster_bricks/vmstore force
_______________________________________________
Users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/[email protected]/message/SLR6LC2NSJ4BVZOC7DZWC3UGESNR7TX4/

Reply via email to