Hi there, I'm using qpid 0.8 and I'm trying to configure queue to use the limit-policy parameter without luck.
Here is the command to create a queue qpid-config add queue myQueue --durable --file-size=256 --file-count=96 --max-queue-count=100 --limit-policy=flow-to-disk Here is output of the top command after qpid starts PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 28146 qpidd 19 0 123m 5596 4104 S 0.0 0.3 0:00.00 qpidd As you can see it uses ~5.6mb of memory. After I start to send non-persistent messages (size of each message is 32 bytes) without consumption the output of the top command is the following: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 28146 qpidd 16 0 2541m 1.8g 3520 S 49.0 94.1 0:41.75 qpidd Now qpid consumes 1.8Gb and it continues to consume more. I'm wondering why so? How to make the queue to use the limit-policy parameter correctly? Best Regards, Sergey Zhemzhitsky _______________________________________________________ The information contained in this message may be privileged and conf idential and protected from disclosure. If you are not the original intended recipient, you are hereby notified that any review, retransmission, dissemination, or other use of, or taking of any action in reliance upon, this information is prohibited. If you have received this communication in error, please notify the sender immediately by replying to this message and delete it from your computer. Thank you for your cooperation. Troika Dialog, Russia. If you need assistance please contact our Contact Center (+7495) 258 0500 or go to www.troika.ru/eng/Contacts/system.wbp
