Hi Lorenz, Is this bug (https://bugzilla.redhat.com/show_bug.cgi?id=1181721) applicable for java version 0.28 as well?
Thanks, Ram On Fri, Oct 2, 2015 at 8:44 AM, rammohan ganapavarapu < [email protected]> wrote: > Lorenz, > > > Let me start over with default config and see how it looks. > > Thanks, > Ram > > On Fri, Oct 2, 2015 at 8:27 AM, Lorenz Quack <[email protected]> > wrote: > >> Hi Ram, >> >> I'm sorry but I am a bit puzzled as to what is going on. >> Your config seems to be fine and you said that all components in the >> WebUI show up as ACTIVE as well. >> With no ERRORs/WARNs in the log file I am running out of ideas. >> >> Exactly what error are you seeing in what circumstances? >> >> When you point QPID_WORK at an empty path the broker will create an >> initial default configuration for you. >> Are you able to connect to the broker in such a default configuration? >> >> >> Kind regards, >> Lorenz >> >> >> >> >> On 01/10/15 15:10, rammohan ganapavarapu wrote: >> >>> Hi Lorenz, >>> >>> I don't see any error in logs, from web ui I can see vh as I created them >>> from ui. >>> >>> Ram >>> On Oct 1, 2015 1:10 AM, "Lorenz Quack" <[email protected]> wrote: >>> >>> Hi Ram, >>>> >>>> did you check the log files for errors? >>>> The broker log is located in ${QPID_WORK}/log/qpid.log >>>> Alternatively, did you check in the web management console to see >>>> whether >>>> all your virtual hosts are up and running? >>>> In the "Host State" it should say "ACTIVE" if everything is fine. >>>> >>>> The reason I am asking is that you would see this error when there is a >>>> problem with the config so that the virtual host cannot start up. >>>> For example if the broker cannot access the password file in >>>> /opt/qpid-java/etc/passwd the AuthenticationProvider ends up in errored >>>> state so that the virtual hosts using it cannot start. >>>> >>>> I hope the log files help shed some light on what is going on. >>>> >>>> Cheers, >>>> Lorenz >>>> >>>> >>>> >>>> On 30/09/15 18:36, rammohan ganapavarapu wrote: >>>> >>>> Lorenz, >>>>> >>>>> Thanks for quick reply, i got the config from qpid website, where can i >>>>> get >>>>> sample config fro 0.32 version? I have created virtualhost using web ui >>>>> and >>>>> restarted qpidd with the new config but still same issue. >>>>> >>>>> Here is the config generated by qpid after i have added VH from ui. >>>>> >>>>> >>>>> { >>>>> "id" : "ad4094d4-8c16-439e-96a7-babc73d7e260", >>>>> "name" : "Broker", >>>>> "storeVersion" : 1, >>>>> "defaultVirtualHost" : "default", >>>>> "modelVersion" : "3.0", >>>>> "authenticationproviders" : [ { >>>>> "id" : "0407acc8-519a-47c2-a242-3325c79fa8be", >>>>> "name" : "Anonymous", >>>>> "type" : "Anonymous" >>>>> }, { >>>>> "id" : "36b029e1-aec0-488e-b8f3-bef6df6b69de", >>>>> "name" : "passwordFile", >>>>> "path" : "/opt/qpid-java/etc/passwd", >>>>> "type" : "PlainPasswordFile", >>>>> "preferencesproviders" : [ { >>>>> "id" : "e34f556a-0bec-4074-829c-7e208d146a88", >>>>> "name" : "fileSystemPreferences", >>>>> "path" : "/data/user.preferences.json", >>>>> "type" : "FileSystemPreferences" >>>>> } ] >>>>> } ], >>>>> "plugins" : [ { >>>>> "id" : "c7343727-90d0-41a7-a277-6de89a6b85d2", >>>>> "httpBasicAuthenticationEnabled" : true, >>>>> "name" : "httpManagement", >>>>> "type" : "MANAGEMENT-HTTP" >>>>> }, { >>>>> "id" : "57f8d7fb-5932-4f66-9df7-70301ae55fa0", >>>>> "name" : "jmxManagement", >>>>> "type" : "MANAGEMENT-JMX" >>>>> } ], >>>>> "ports" : [ { >>>>> "id" : "eee9ef41-696f-499a-8a4e-4f767d8a4795", >>>>> "authenticationProvider" : "Anonymous", >>>>> "name" : "AMQP", >>>>> "port" : "5672", >>>>> "virtualhostaliases" : [ { >>>>> "id" : "b1fd3cf2-b059-4560-9cb6-9402deb83a3e", >>>>> "name" : "defaultAlias", >>>>> "type" : "defaultAlias" >>>>> }, { >>>>> "id" : "f80f53b9-6c02-49ff-86d4-36f6cfb3b398", >>>>> "name" : "hostnameAlias", >>>>> "type" : "hostnameAlias" >>>>> }, { >>>>> "id" : "38cfa28a-b615-45da-a9de-5438b0e0c9d4", >>>>> "name" : "nameAlias", >>>>> "type" : "nameAlias" >>>>> } ] >>>>> }, { >>>>> "id" : "bd02f479-d4e9-425d-a21e-cb96e5911ab4", >>>>> "authenticationProvider" : "Anonymous", >>>>> "name" : "HTTP", >>>>> "port" : "9090", >>>>> "protocols" : [ "HTTP" ] >>>>> }, { >>>>> "id" : "254a626f-dbb6-4ebc-b7a8-62fea8836627", >>>>> "authenticationProvider" : "Anonymous", >>>>> "name" : "JMX_CONNECTOR", >>>>> "port" : "9099", >>>>> "protocols" : [ "JMX_RMI" ] >>>>> }, { >>>>> "id" : "8a5e84c5-110a-43cd-895c-936e0845d8b4", >>>>> "name" : "RMI_REGISTRY", >>>>> "port" : "8999", >>>>> "protocols" : [ "RMI" ] >>>>> } ], >>>>> "virtualhostnodes" : [ { >>>>> "id" : "ee1fdce2-85a2-4c0e-9f27-77666294cb72", >>>>> "storePath" : "/data/derbystore/default", >>>>> "name" : "default", >>>>> "type" : "DERBY" >>>>> }, { >>>>> "id" : "19c51f73-1e79-4924-a731-1f0d2007a7b5", >>>>> "name" : "localhost", >>>>> "type" : "JSON", >>>>> "desiredState" : "ACTIVE", >>>>> "context" : { >>>>> }, >>>>> "storePath" : "/data/derbystore/", >>>>> "virtualHostInitialConfiguration" : "{}", >>>>> "lastUpdatedBy" : "ANONYMOUS", >>>>> "lastUpdatedTime" : 1443559649913, >>>>> "createdBy" : "ANONYMOUS", >>>>> "createdTime" : 1443559648803 >>>>> }, { >>>>> "id" : "32ba0079-78d4-4170-84f1-2298297844a3", >>>>> "name" : "test", >>>>> "type" : "DERBY", >>>>> "desiredState" : "ACTIVE", >>>>> "context" : { >>>>> }, >>>>> "storePath" : "/data/derbystore/", >>>>> "virtualHostInitialConfiguration" : "{}", >>>>> "lastUpdatedBy" : "ANONYMOUS", >>>>> "lastUpdatedTime" : 1443559617163, >>>>> "createdBy" : "ANONYMOUS", >>>>> "createdTime" : 1443559614432 >>>>> } ] >>>>> } >>>>> >>>>> On Wed, Sep 30, 2015 at 9:34 AM, Lorenz Quack <[email protected]> >>>>> wrote: >>>>> >>>>> Hi Ram, >>>>> >>>>>> I now believe the problem is the broker config after all. >>>>>> >>>>>> you are missing the section for the virtualhostnode which should look >>>>>> something like this: >>>>>> "virtualhostnodes" : [ { >>>>>> "id" : "<some UUID>", >>>>>> "name" : "default", >>>>>> "type" : "JSON", >>>>>> "defaultVirtualHostNode" : "true", >>>>>> "virtualHostInitialConfiguration" : "{}", >>>>>> "lastUpdatedBy" : null, >>>>>> "lastUpdatedTime" : 1443629901399, >>>>>> "createdBy" : null, >>>>>> "createdTime" : 0 >>>>>> } ] >>>>>> and should be at the top level (as a sibling of modelVersion, >>>>>> authenticationProvider and so on.) >>>>>> The configuration for the virtualhost then usually goes into a >>>>>> subdirectory named after the virtualhostnode. >>>>>> >>>>>> where did you get that configuration from? >>>>>> Was it created by the 0.32 broker? >>>>>> It doesn't seem that way since the modelVersion of your config is >>>>>> 1.3. I >>>>>> believe 0.32 has model version 3.0. >>>>>> >>>>>> cheers, >>>>>> Lorenz >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On 30/09/15 16:27, rammohan ganapavarapu wrote: >>>>>> >>>>>> Lorenz, >>>>>> >>>>>>> I was trying to connect using python as below. >>>>>>> >>>>>>> from qpid.messaging import * >>>>>>> >>>>>>> broker = "localhost:5672" >>>>>>> address = "amq.topic" >>>>>>> connection = Connection(broker) >>>>>>> >>>>>>> try: >>>>>>> connection.open() >>>>>>> >>>>>>> >>>>>>> On Wed, Sep 30, 2015 at 1:21 AM, Lorenz Quack < >>>>>>> [email protected]> >>>>>>> wrote: >>>>>>> >>>>>>> Hi Ram, >>>>>>> >>>>>>> how do you try to connect to the broker on the client side? >>>>>>>> What connection URL are you using? >>>>>>>> My guess is there is something wrong there. >>>>>>>> The broker config looks fine to me on first glance. >>>>>>>> >>>>>>>> Cheers, >>>>>>>> Lorenz >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On 29/09/15 21:32, rammohan ganapavarapu wrote: >>>>>>>> >>>>>>>> Hi, >>>>>>>> >>>>>>>> I have java-broker 0.32 installed and when i try to make connection >>>>>>>>> with >>>>>>>>> java client using anonymous, i am getting unknown virtual host >>>>>>>>> error. >>>>>>>>> Any >>>>>>>>> idea? i >>>>>>>>> >>>>>>>>> Unknown virtualhost ''(402) >>>>>>>>> >>>>>>>>> >>>>>>>>> here is my startup config file. >>>>>>>>> >>>>>>>>> { >>>>>>>>> "name": "Broker", >>>>>>>>> "defaultVirtualHost": "default", >>>>>>>>> "modelVersion": "1.3", >>>>>>>>> "storeVersion": 1, >>>>>>>>> "authenticationproviders": [ >>>>>>>>> { >>>>>>>>> "name": "Anonymous", >>>>>>>>> "type": "Anonymous" >>>>>>>>> }, >>>>>>>>> { >>>>>>>>> "name": "passwordFile", >>>>>>>>> "path": "/opt/qpid-java/etc/passwd", >>>>>>>>> "preferencesproviders": [ >>>>>>>>> { >>>>>>>>> "name": "fileSystemPreferences", >>>>>>>>> "path": "/data/user.preferences.json", >>>>>>>>> "type": "FileSystemPreferences" >>>>>>>>> } >>>>>>>>> ], >>>>>>>>> "type": "PlainPasswordFile" >>>>>>>>> } >>>>>>>>> ], >>>>>>>>> "plugins": [ >>>>>>>>> { >>>>>>>>> "name": "jmxManagement", >>>>>>>>> "pluginType": "MANAGEMENT-JMX" >>>>>>>>> }, >>>>>>>>> { >>>>>>>>> "httpBasicAuthenticationEnabled": true, >>>>>>>>> "name": "httpManagement", >>>>>>>>> "pluginType": "MANAGEMENT-HTTP" >>>>>>>>> } >>>>>>>>> ], >>>>>>>>> "ports": [ >>>>>>>>> { >>>>>>>>> "authenticationProvider": "Anonymous", >>>>>>>>> "name": "JMX_CONNECTOR", >>>>>>>>> "port": "9099", >>>>>>>>> "protocols": [ >>>>>>>>> "JMX_RMI" >>>>>>>>> ] >>>>>>>>> }, >>>>>>>>> { >>>>>>>>> "authenticationProvider": "Anonymous", >>>>>>>>> "name": "HTTP", >>>>>>>>> "port": "9090", >>>>>>>>> "protocols": [ >>>>>>>>> "HTTP" >>>>>>>>> ] >>>>>>>>> }, >>>>>>>>> { >>>>>>>>> "name": "RMI_REGISTRY", >>>>>>>>> "port": "8999", >>>>>>>>> "protocols": [ >>>>>>>>> "RMI" >>>>>>>>> ] >>>>>>>>> }, >>>>>>>>> { >>>>>>>>> "authenticationProvider": "Anonymous", >>>>>>>>> "name": "AMQP", >>>>>>>>> "port": "5672" >>>>>>>>> } >>>>>>>>> ], >>>>>>>>> "virtualhosts": [ >>>>>>>>> { >>>>>>>>> "name": "default", >>>>>>>>> "storePath": "/data/derbystore/default", >>>>>>>>> "storeType": "DERBY", >>>>>>>>> "type": "STANDARD" >>>>>>>>> } >>>>>>>>> ] >>>>>>>>> } >>>>>>>>> >>>>>>>>> Ram >>>>>>>>> >>>>>>>>> On Wed, Sep 23, 2015 at 9:09 AM, rammohan ganapavarapu < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>>>>>> I was able to make localhost:8080/login.html working, i i have FW >>>>>>>>> infront >>>>>>>>> >>>>>>>>> of host so i was doing ssh tunnel using local port 10001 but looks >>>>>>>>> >>>>>>>>>> like >>>>>>>>>> it >>>>>>>>>> didnt like, so i used local 8080 port for tunnel with PasswordFile >>>>>>>>>> auth >>>>>>>>>> and >>>>>>>>>> it worked. >>>>>>>>>> >>>>>>>>>> Thanks, >>>>>>>>>> Ram >>>>>>>>>> >>>>>>>>>> On Wed, Sep 23, 2015 at 8:56 AM, rammohan ganapavarapu < >>>>>>>>>> [email protected]> wrote: >>>>>>>>>> >>>>>>>>>> Also when i try to access localhost:8080/login.html i am getting >>>>>>>>>> the >>>>>>>>>> >>>>>>>>>> popup window with below error for my credentials. >>>>>>>>>> >>>>>>>>>>> RequestError: Unable to load service/sasl status: 500 >>>>>>>>>>> >>>>>>>>>>> curl -s -u admin:admin 0:8080/service/sasl >>>>>>>>>>> { >>>>>>>>>>> "user" : "admin", >>>>>>>>>>> "mechanisms" : [ "CRAM-MD5" ] >>>>>>>>>>> } >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Here is qpid.log >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> 2015-09-23 15:45:37,855 WARN [HttpManagement-23 - /service/sasl] >>>>>>>>>>> (servlet.ServletHandler) - /service/sasl >>>>>>>>>>> java.lang.NullPointerException >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.apache.qpid.server.management.plugin.HttpManagementUtil.tryToAuthenticate(HttpManagementUtil.java:161) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.apache.qpid.server.management.plugin.servlet.rest.SaslServlet.getAuthorisedSubject(SaslServlet.java:314) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.apache.qpid.server.management.plugin.servlet.rest.AbstractServlet.doWithSubjectAndActor(AbstractServlet.java:200) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.apache.qpid.server.management.plugin.servlet.rest.AbstractServlet.doGet(AbstractServlet.java:73) >>>>>>>>>>> at >>>>>>>>>>> javax.servlet.http.HttpServlet.service(HttpServlet.java:575) >>>>>>>>>>> at >>>>>>>>>>> javax.servlet.http.HttpServlet.service(HttpServlet.java:668) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.eclipse.jetty.servlet.ServletHolder.handle(ServletHolder.java:684) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1496) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.apache.qpid.server.management.plugin.filter.ForbiddingAuthorisationFilter.doFilter(ForbiddingAuthorisationFilter.java:90) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1467) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.apache.qpid.server.management.plugin.filter.ForbiddingTraceFilter.doFilter(ForbiddingTraceFilter.java:65) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1467) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.eclipse.jetty.servlet.ServletHandler.doHandle(ServletHandler.java:499) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.eclipse.jetty.server.session.SessionHandler.doHandle(SessionHandler.java:229) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.eclipse.jetty.server.handler.ContextHandler.doHandle(ContextHandler.java:1086) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.eclipse.jetty.servlet.ServletHandler.doScope(ServletHandler.java:428) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.eclipse.jetty.server.session.SessionHandler.doScope(SessionHandler.java:193) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.eclipse.jetty.server.handler.ContextHandler.doScope(ContextHandler.java:1020) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.eclipse.jetty.server.handler.ScopedHandler.handle(ScopedHandler.java:135) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.eclipse.jetty.server.handler.HandlerWrapper.handle(HandlerWrapper.java:116) >>>>>>>>>>> at >>>>>>>>>>> org.eclipse.jetty.server.Server.handle(Server.java:366) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.eclipse.jetty.server.AbstractHttpConnection.handleRequest(AbstractHttpConnection.java:494) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.eclipse.jetty.server.AbstractHttpConnection.headerComplete(AbstractHttpConnection.java:971) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.eclipse.jetty.server.AbstractHttpConnection$RequestHandler.headerComplete(AbstractHttpConnection.java:1033) >>>>>>>>>>> at >>>>>>>>>>> org.eclipse.jetty.http.HttpParser.parseNext(HttpParser.java:644) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.eclipse.jetty.http.HttpParser.parseAvailable(HttpParser.java:235) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.eclipse.jetty.server.AsyncHttpConnection.handle(AsyncHttpConnection.java:82) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.eclipse.jetty.io.nio.SelectChannelEndPoint.handle(SelectChannelEndPoint.java:667) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.eclipse.jetty.io.nio.SelectChannelEndPoint$1.run(SelectChannelEndPoint.java:52) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.eclipse.jetty.util.thread.QueuedThreadPool.runJob(QueuedThreadPool.java:608) >>>>>>>>>>> at >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> org.eclipse.jetty.util.thread.QueuedThreadPool$3.run(QueuedThreadPool.java:543) >>>>>>>>>>> at java.lang.Thread.run(Thread.java:745) >>>>>>>>>>> 2015-09-23 15:45:37,856 DEBUG [HttpManagement-23 - /service/sasl] >>>>>>>>>>> (servlet.ServletHandler) - (GET /service/sasl)@925500022 >>>>>>>>>>> org.eclipse.jetty.server.Request@372a0276 >>>>>>>>>>> 2015-09-23 15:45:37,856 DEBUG [HttpManagement-23 - /service/sasl] >>>>>>>>>>> (server.Server) - RESPONSE /service/sasl 500 handled=true >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Wed, Sep 23, 2015 at 8:39 AM, rammohan ganapavarapu < >>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>> >>>>>>>>>>> Lorenz, >>>>>>>>>>> >>>>>>>>>>> Thanks for quick reply, i am accessing localhost:8080/management >>>>>>>>>>> url >>>>>>>>>>> >>>>>>>>>>>> and >>>>>>>>>>>> i am getting that error and login button is also not enabled, in >>>>>>>>>>>> the >>>>>>>>>>>> logs i >>>>>>>>>>>> am seeing 404 errors. But i am able to access using curl with >>>>>>>>>>>> credentials. >>>>>>>>>>>> >>>>>>>>>>>> One more issue, when i try to connect to broker i am getting >>>>>>>>>>>> unknown >>>>>>>>>>>> virtual host error and also SASL mismatch error. My client >>>>>>>>>>>> checks >>>>>>>>>>>> if >>>>>>>>>>>> PLAN >>>>>>>>>>>> is available if it doesn't then it try to use ANONYMOUS. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> url=amqp://guest:********@/?brokerlist='tcp://localhost:5672?connecttimeout='5000'&sasl_mechs='ANONYMOUS'' >>>>>>>>>>>> Not Connected. error Unknown virtualhost '' username=null >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> url=amqp://guest:********@/?brokerlist='tcp://localhost:5672?connecttimeout='5000'&sasl_mechs='PLAIN'' >>>>>>>>>>>> Not Connected. error Client and broker have no SASL mechanisms >>>>>>>>>>>> in >>>>>>>>>>>> common. >>>>>>>>>>>> Broker allows : ANONYMOUS Client has : [EXTERNAL, GSSAPI, >>>>>>>>>>>> CRAM-MD5-HASHED, >>>>>>>>>>>> CRAM-MD5, AMQPLAIN, PLAIN, ANONYMOUS] Client restricted itself >>>>>>>>>>>> to : >>>>>>>>>>>> PLAIN >>>>>>>>>>>> username=guest >>>>>>>>>>>> >>>>>>>>>>>> When i do curl for virtualhosts i am getting empty list. >>>>>>>>>>>> >>>>>>>>>>>> curl -s -u admin 0:9090/api/latest/virtualhost/ >>>>>>>>>>>> [ ] >>>>>>>>>>>> >>>>>>>>>>>> curl -s -u admin >>>>>>>>>>>> 0:9090/api/latest/authenticationprovider/passwordFile|grep mech >>>>>>>>>>>> "mechanisms" : [ "PLAIN", "CRAM-MD5" ], >>>>>>>>>>>> >>>>>>>>>>>> curl -s -u admin >>>>>>>>>>>> 0:9090/api/latest/authenticationprovider/Anonymous|grep mech >>>>>>>>>>>> "mechanisms" : [ "ANONYMOUS" ], >>>>>>>>>>>> >>>>>>>>>>>> Here is my config.json that i am using to start broker. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> cat config.json >>>>>>>>>>>> { >>>>>>>>>>>> "name": "Broker", >>>>>>>>>>>> "defaultVirtualHost": "default", >>>>>>>>>>>> "modelVersion": "1.3", >>>>>>>>>>>> "storeVersion": 1, >>>>>>>>>>>> "authenticationproviders": [ >>>>>>>>>>>> { >>>>>>>>>>>> "name": "Anonymous", >>>>>>>>>>>> "type": "Anonymous" >>>>>>>>>>>> }, >>>>>>>>>>>> { >>>>>>>>>>>> "name": "passwordFile", >>>>>>>>>>>> "secureOnlyMechanisms" : [ "PLAIN" ], >>>>>>>>>>>> "path": "/opt/qpid-java/etc/passwd", >>>>>>>>>>>> "preferencesproviders": [ >>>>>>>>>>>> { >>>>>>>>>>>> "name": "fileSystemPreferences", >>>>>>>>>>>> "path": "/data/user.preferences.json", >>>>>>>>>>>> "type": "FileSystemPreferences" >>>>>>>>>>>> } >>>>>>>>>>>> ], >>>>>>>>>>>> "type": "PlainPasswordFile" >>>>>>>>>>>> } >>>>>>>>>>>> ], >>>>>>>>>>>> "plugins": [ >>>>>>>>>>>> { >>>>>>>>>>>> "name": "jmxManagement", >>>>>>>>>>>> "pluginType": "MANAGEMENT-JMX" >>>>>>>>>>>> }, >>>>>>>>>>>> { >>>>>>>>>>>> "httpBasicAuthenticationEnabled": true, >>>>>>>>>>>> "name": "httpManagement", >>>>>>>>>>>> "pluginType": "MANAGEMENT-HTTP" >>>>>>>>>>>> } >>>>>>>>>>>> ], >>>>>>>>>>>> "ports": [ >>>>>>>>>>>> { >>>>>>>>>>>> "authenticationProvider": "passwordFile", >>>>>>>>>>>> "name": "JMX_CONNECTOR", >>>>>>>>>>>> "port": "9099", >>>>>>>>>>>> "protocols": [ >>>>>>>>>>>> "JMX_RMI" >>>>>>>>>>>> ] >>>>>>>>>>>> }, >>>>>>>>>>>> { >>>>>>>>>>>> "authenticationProvider": "passwordFile", >>>>>>>>>>>> "name": "HTTP", >>>>>>>>>>>> "port": "9090", >>>>>>>>>>>> "protocols": [ >>>>>>>>>>>> "HTTP" >>>>>>>>>>>> ] >>>>>>>>>>>> }, >>>>>>>>>>>> { >>>>>>>>>>>> "name": "RMI_REGISTRY", >>>>>>>>>>>> "port": "8999", >>>>>>>>>>>> "protocols": [ >>>>>>>>>>>> "RMI" >>>>>>>>>>>> ] >>>>>>>>>>>> }, >>>>>>>>>>>> { >>>>>>>>>>>> "authenticationProvider": "passwordFile", >>>>>>>>>>>> "name": "AMQP", >>>>>>>>>>>> "port": "5672" >>>>>>>>>>>> } >>>>>>>>>>>> ], >>>>>>>>>>>> "virtualhosts": [ >>>>>>>>>>>> { >>>>>>>>>>>> "name": "default", >>>>>>>>>>>> "storePath": "/data/derbystore/default", >>>>>>>>>>>> "storeType": "DERBY", >>>>>>>>>>>> "type": "STANDARD" >>>>>>>>>>>> } >>>>>>>>>>>> ] >>>>>>>>>>>> } >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Wed, Sep 23, 2015 at 1:23 AM, Lorenz Quack < >>>>>>>>>>>> [email protected]> >>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>> Hello Ram, >>>>>>>>>>>> >>>>>>>>>>>> By default you must authenticate with the broker before >>>>>>>>>>>> performing >>>>>>>>>>>> >>>>>>>>>>>>> any >>>>>>>>>>>>> management operation to prevent unauthorized access. >>>>>>>>>>>>> The error seems to indicate that you did not do this. >>>>>>>>>>>>> When you use the browser you can login via >>>>>>>>>>>>> http://localhost:8080/login.html (assuming the broker is >>>>>>>>>>>>> running >>>>>>>>>>>>> on >>>>>>>>>>>>> the localhost in default configuration). >>>>>>>>>>>>> Default username and password are admin:admin. Of course you >>>>>>>>>>>>> should >>>>>>>>>>>>> change these when deploying. >>>>>>>>>>>>> >>>>>>>>>>>>> If this does not solve your issue could you provide more >>>>>>>>>>>>> information? >>>>>>>>>>>>> What URL are you trying to access when you see the error? >>>>>>>>>>>>> Do you see interesting information in the broker logs? >>>>>>>>>>>>> >>>>>>>>>>>>> Kind Regards, >>>>>>>>>>>>> Lorenz >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On 22/09/15 19:28, rammohan ganapavarapu wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> Hi, >>>>>>>>>>>>> >>>>>>>>>>>>> I am trying to use java broker 0.32 version, qpid came up fine >>>>>>>>>>>>> but >>>>>>>>>>>>> >>>>>>>>>>>>>> when i >>>>>>>>>>>>>> try to access management url using curl or through browser i >>>>>>>>>>>>>> cam >>>>>>>>>>>>>> getting >>>>>>>>>>>>>> bellow error any idea how to fix this? >>>>>>>>>>>>>> >>>>>>>>>>>>>> 000 - error >>>>>>>>>>>>>> Please login again and retry your operation. >>>>>>>>>>>>>> Please correct the problem and retry your operation. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>> Ram >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Fri, Sep 11, 2015 at 1:21 PM, rammohan ganapavarapu < >>>>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> Ted, >>>>>>>>>>>>>> >>>>>>>>>>>>>> I have used that tool but its not giving me what file/message >>>>>>>>>>>>>> is >>>>>>>>>>>>>> >>>>>>>>>>>>>> actually >>>>>>>>>>>>>>> got corrupted. May be i need to dig little deeper to find the >>>>>>>>>>>>>>> culprit. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thanks a lot, >>>>>>>>>>>>>>> Ram >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Fri, Sep 11, 2015 at 1:12 PM, Ted Ross <[email protected]> >>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Ram, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> In tools/src/py there are a number of tools related to the >>>>>>>>>>>>>>> store >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> (I'm >>>>>>>>>>>>>>>> looking at version 0.28). qpid-store-chk looks promising. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> If you need deeper insight into what's going on, there are >>>>>>>>>>>>>>>> others >>>>>>>>>>>>>>>> here >>>>>>>>>>>>>>>> that know this stuff a lot better than I do. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -Ted >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On 09/11/2015 04:03 PM, rammohan ganapavarapu wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Ted, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Thanks for quick reply, yes those messages are important, i >>>>>>>>>>>>>>>> was >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> looking >>>>>>>>>>>>>>>>> for >>>>>>>>>>>>>>>>> tools to view those journal files but couldn't find tools, >>>>>>>>>>>>>>>>> if >>>>>>>>>>>>>>>>> you >>>>>>>>>>>>>>>>> know >>>>>>>>>>>>>>>>> any >>>>>>>>>>>>>>>>> tools can you please let me know? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Ram >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Fri, Sep 11, 2015 at 1:00 PM, Ted Ross < >>>>>>>>>>>>>>>>> [email protected]> >>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I suspect that you have corrupted data in your journal >>>>>>>>>>>>>>>>> store. >>>>>>>>>>>>>>>>> If >>>>>>>>>>>>>>>>> you are >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> jumping between versions that are that far apart (0.14 and >>>>>>>>>>>>>>>>> 0.28), >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> you >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> may >>>>>>>>>>>>>>>>>> have issues with journal compatibility. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Are the stored messages important? If not, you can remove >>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>> journal >>>>>>>>>>>>>>>>>> files (rm -rf /data/rhm). If they are important, I >>>>>>>>>>>>>>>>>> believe >>>>>>>>>>>>>>>>>> there >>>>>>>>>>>>>>>>>> are >>>>>>>>>>>>>>>>>> tools >>>>>>>>>>>>>>>>>> available to view the files offline. This might help >>>>>>>>>>>>>>>>>> identify >>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>> possibly >>>>>>>>>>>>>>>>>> repair the specific problem. I'll have to defer to others >>>>>>>>>>>>>>>>>> about >>>>>>>>>>>>>>>>>> where >>>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>>> find and how to use such tools. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -Ted >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On 09/11/2015 03:40 PM, rammohan ganapavarapu wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I am using qpid-cpp broker version 0.14, for some reason >>>>>>>>>>>>>>>>>> i am >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> getting >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> below >>>>>>>>>>>>>>>>>>> error when i try to restart qpid, i also tried version >>>>>>>>>>>>>>>>>>> 0.28 >>>>>>>>>>>>>>>>>>> but >>>>>>>>>>>>>>>>>>> same >>>>>>>>>>>>>>>>>>> error >>>>>>>>>>>>>>>>>>> any one have any idea how to resolve this? i have around >>>>>>>>>>>>>>>>>>> 4K >>>>>>>>>>>>>>>>>>> messages >>>>>>>>>>>>>>>>>>> in DL >>>>>>>>>>>>>>>>>>> queue. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> 2015-09-11 18:53:53 [Store] debug Journal "test-queue": >>>>>>>>>>>>>>>>>>> Journal >>>>>>>>>>>>>>>>>>> directory >>>>>>>>>>>>>>>>>>> = >>>>>>>>>>>>>>>>>>> "/data//rhm/jrnl/0009/test-queue/"; Base file name = >>>>>>>>>>>>>>>>>>> "JournalData" >>>>>>>>>>>>>>>>>>> 2015-09-11 18:53:53 [Store] debug Journal "test-queue": >>>>>>>>>>>>>>>>>>> Recover; >>>>>>>>>>>>>>>>>>> num_jfiles=8 jfsize_sblks=3072 queue_id = 0x2 >>>>>>>>>>>>>>>>>>> wcache_pgsize_sblks=64 >>>>>>>>>>>>>>>>>>> wcache_num_pages=32 >>>>>>>>>>>>>>>>>>> 2015-09-11 18:53:53 [Store] info Journal "test-queue": >>>>>>>>>>>>>>>>>>> Recovery >>>>>>>>>>>>>>>>>>> found >>>>>>>>>>>>>>>>>>> 64 >>>>>>>>>>>>>>>>>>> files (different from --num-jfiles value of 8). >>>>>>>>>>>>>>>>>>> 2015-09-11 18:53:53 [Store] info Journal "/test-queue": >>>>>>>>>>>>>>>>>>> Recovery >>>>>>>>>>>>>>>>>>> found >>>>>>>>>>>>>>>>>>> file >>>>>>>>>>>>>>>>>>> size = 5120 (different from --jfile-size-pgs value of >>>>>>>>>>>>>>>>>>> 24). >>>>>>>>>>>>>>>>>>> 2015-09-11 18:53:54 [Store] debug Journal "test-queue": >>>>>>>>>>>>>>>>>>> Recover >>>>>>>>>>>>>>>>>>> file >>>>>>>>>>>>>>>>>>> analysis (jid="test-queue"): njf=64 ae=F aemjf=0 owi=F >>>>>>>>>>>>>>>>>>> frot=T >>>>>>>>>>>>>>>>>>> jempty=F >>>>>>>>>>>>>>>>>>> ffid=0 fro=0x200 (4 dblks) lfid=1 eo=0x42da00 (34228 >>>>>>>>>>>>>>>>>>> dblks) >>>>>>>>>>>>>>>>>>> h_rid=0x47167 >>>>>>>>>>>>>>>>>>> lffull=F jfull=F Enqueued records (txn & non-txn): [ >>>>>>>>>>>>>>>>>>> fid_00=6684 >>>>>>>>>>>>>>>>>>> fid_01=0 >>>>>>>>>>>>>>>>>>> fid_02=0 fid_03=0 fid_04=0 fid_05=0 fid_06=0 fid_07=0 >>>>>>>>>>>>>>>>>>> fid_08=0 >>>>>>>>>>>>>>>>>>> fid_09=0 >>>>>>>>>>>>>>>>>>> fid_10=0 fid_11=0 fid_12=0 fid_13=0 fid_14=0 fid_15=0 >>>>>>>>>>>>>>>>>>> fid_16=0 >>>>>>>>>>>>>>>>>>> fid_17=0 >>>>>>>>>>>>>>>>>>> fid_18=0 fid_19=0 fid_20=0 fid_21=0 fid_22=0 fid_23=0 >>>>>>>>>>>>>>>>>>> fid_24=0 >>>>>>>>>>>>>>>>>>> fid_25=0 >>>>>>>>>>>>>>>>>>> fid_26=0 fid_27=0 fid_28=0 fid_29=0 fid_30=0 fid_31=0 >>>>>>>>>>>>>>>>>>> fid_32=0 >>>>>>>>>>>>>>>>>>> fid_33=0 >>>>>>>>>>>>>>>>>>> fid_34=0 fid_35=0 fid_36=0 fid_37=0 fid_38=0 fid_39=0 >>>>>>>>>>>>>>>>>>> fid_40=0 >>>>>>>>>>>>>>>>>>> fid_41=0 >>>>>>>>>>>>>>>>>>> fid_42=0 fid_43=0 fid_44=0 fid_45=0 fid_46=0 fid_47=0 >>>>>>>>>>>>>>>>>>> fid_48=0 >>>>>>>>>>>>>>>>>>> fid_49=0 >>>>>>>>>>>>>>>>>>> fid_50=0 fid_51=0 fid_52=0 fid_53=0 fid_54=0 fid_55=0 >>>>>>>>>>>>>>>>>>> fid_56=0 >>>>>>>>>>>>>>>>>>> fid_57=0 >>>>>>>>>>>>>>>>>>> fid_58=0 fid_59=0 fid_60=0 fid_61=0 fid_62=0 fid_63=0 ] >>>>>>>>>>>>>>>>>>> 2015-09-11 18:53:54 [Store] debug Journal "test-queue": >>>>>>>>>>>>>>>>>>> Recover >>>>>>>>>>>>>>>>>>> phase 1 >>>>>>>>>>>>>>>>>>> complete; highest rid found = 0x47167; emap.size=6684; >>>>>>>>>>>>>>>>>>> tmap.size=0; >>>>>>>>>>>>>>>>>>> journal >>>>>>>>>>>>>>>>>>> now read-only. >>>>>>>>>>>>>>>>>>> 2015-09-11 18:53:57 [System] debug Exception constructed: >>>>>>>>>>>>>>>>>>> Queue >>>>>>>>>>>>>>>>>>> ax-q-mxgroup007: recoverMessages() failed: jexception >>>>>>>>>>>>>>>>>>> 0x010a >>>>>>>>>>>>>>>>>>> MessageStoreImpl::getExternMessage() threw JERR__NOTIMPL: >>>>>>>>>>>>>>>>>>> Not >>>>>>>>>>>>>>>>>>> implemented >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> (/tmp/qpid-cpp-0.28/src/qpid/legacystore/MessageStoreImpl.cpp:1059) >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Fri, Sep 11, 2015 at 12:16 PM, rammohan ganapavarapu < >>>>>>>>>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I am using qpid-cpp broker version 0.14, for some reason >>>>>>>>>>>>>>>>>>> i >>>>>>>>>>>>>>>>>>> am >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> getting >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> below error when i try to restart qpid, i also tried >>>>>>>>>>>>>>>>>>>> version >>>>>>>>>>>>>>>>>>>> 0.28 but >>>>>>>>>>>>>>>>>>>> same >>>>>>>>>>>>>>>>>>>> error any one have any idea how to resolve this? i have >>>>>>>>>>>>>>>>>>>> around >>>>>>>>>>>>>>>>>>>> 4K >>>>>>>>>>>>>>>>>>>> messages >>>>>>>>>>>>>>>>>>>> in DL queue. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> 2015-09-11 18:53:53 [Store] debug Journal "test-queue": >>>>>>>>>>>>>>>>>>>> Journal >>>>>>>>>>>>>>>>>>>> directory >>>>>>>>>>>>>>>>>>>> = "/data//rhm/jrnl/0009/test-queue/"; Base file name = >>>>>>>>>>>>>>>>>>>> "JournalData" >>>>>>>>>>>>>>>>>>>> 2015-09-11 18:53:53 [Store] debug Journal "test-queue": >>>>>>>>>>>>>>>>>>>> Recover; >>>>>>>>>>>>>>>>>>>> num_jfiles=8 jfsize_sblks=3072 queue_id = 0x2 >>>>>>>>>>>>>>>>>>>> wcache_pgsize_sblks=64 >>>>>>>>>>>>>>>>>>>> wcache_num_pages=32 >>>>>>>>>>>>>>>>>>>> 2015-09-11 18:53:53 [Store] info Journal "test-queue": >>>>>>>>>>>>>>>>>>>> Recovery >>>>>>>>>>>>>>>>>>>> found >>>>>>>>>>>>>>>>>>>> 64 >>>>>>>>>>>>>>>>>>>> files (different from --num-jfiles value of 8). >>>>>>>>>>>>>>>>>>>> 2015-09-11 18:53:53 [Store] info Journal "/test-queue": >>>>>>>>>>>>>>>>>>>> Recovery >>>>>>>>>>>>>>>>>>>> found >>>>>>>>>>>>>>>>>>>> file size = 5120 (different from --jfile-size-pgs value >>>>>>>>>>>>>>>>>>>> of >>>>>>>>>>>>>>>>>>>> 24). >>>>>>>>>>>>>>>>>>>> 2015-09-11 18:53:54 [Store] debug Journal "test-queue": >>>>>>>>>>>>>>>>>>>> Recover >>>>>>>>>>>>>>>>>>>> file >>>>>>>>>>>>>>>>>>>> analysis (jid="test-queue"): njf=64 ae=F aemjf=0 owi=F >>>>>>>>>>>>>>>>>>>> frot=T >>>>>>>>>>>>>>>>>>>> jempty=F >>>>>>>>>>>>>>>>>>>> ffid=0 fro=0x200 (4 dblks) lfid=1 eo=0x42da00 (34228 >>>>>>>>>>>>>>>>>>>> dblks) >>>>>>>>>>>>>>>>>>>> h_rid=0x47167 >>>>>>>>>>>>>>>>>>>> lffull=F jfull=F Enqueued records (txn & non-txn): [ >>>>>>>>>>>>>>>>>>>> fid_00=6684 >>>>>>>>>>>>>>>>>>>> fid_01=0 >>>>>>>>>>>>>>>>>>>> fid_02=0 fid_03=0 fid_04=0 fid_05=0 fid_06=0 fid_07=0 >>>>>>>>>>>>>>>>>>>> fid_08=0 >>>>>>>>>>>>>>>>>>>> fid_09=0 >>>>>>>>>>>>>>>>>>>> fid_10=0 fid_11=0 fid_12=0 fid_13=0 fid_14=0 fid_15=0 >>>>>>>>>>>>>>>>>>>> fid_16=0 >>>>>>>>>>>>>>>>>>>> fid_17=0 >>>>>>>>>>>>>>>>>>>> fid_18=0 fid_19=0 fid_20=0 fid_21=0 fid_22=0 fid_23=0 >>>>>>>>>>>>>>>>>>>> fid_24=0 >>>>>>>>>>>>>>>>>>>> fid_25=0 >>>>>>>>>>>>>>>>>>>> fid_26=0 fid_27=0 fid_28=0 fid_29=0 fid_30=0 fid_31=0 >>>>>>>>>>>>>>>>>>>> fid_32=0 >>>>>>>>>>>>>>>>>>>> fid_33=0 >>>>>>>>>>>>>>>>>>>> fid_34=0 fid_35=0 fid_36=0 fid_37=0 fid_38=0 fid_39=0 >>>>>>>>>>>>>>>>>>>> fid_40=0 >>>>>>>>>>>>>>>>>>>> fid_41=0 >>>>>>>>>>>>>>>>>>>> fid_42=0 fid_43=0 fid_44=0 fid_45=0 fid_46=0 fid_47=0 >>>>>>>>>>>>>>>>>>>> fid_48=0 >>>>>>>>>>>>>>>>>>>> fid_49=0 >>>>>>>>>>>>>>>>>>>> fid_50=0 fid_51=0 fid_52=0 fid_53=0 fid_54=0 fid_55=0 >>>>>>>>>>>>>>>>>>>> fid_56=0 >>>>>>>>>>>>>>>>>>>> fid_57=0 >>>>>>>>>>>>>>>>>>>> fid_58=0 fid_59=0 fid_60=0 fid_61=0 fid_62=0 fid_63=0 ] >>>>>>>>>>>>>>>>>>>> 2015-09-11 18:53:54 [Store] debug Journal "test-queue": >>>>>>>>>>>>>>>>>>>> Recover >>>>>>>>>>>>>>>>>>>> phase >>>>>>>>>>>>>>>>>>>> 1 >>>>>>>>>>>>>>>>>>>> complete; highest rid found = 0x47167; emap.size=6684; >>>>>>>>>>>>>>>>>>>> tmap.size=0; >>>>>>>>>>>>>>>>>>>> journal >>>>>>>>>>>>>>>>>>>> now read-only. >>>>>>>>>>>>>>>>>>>> 2015-09-11 18:53:57 [System] debug Exception >>>>>>>>>>>>>>>>>>>> constructed: >>>>>>>>>>>>>>>>>>>> Queue >>>>>>>>>>>>>>>>>>>> ax-q-mxgroup007: recoverMessages() failed: jexception >>>>>>>>>>>>>>>>>>>> 0x010a >>>>>>>>>>>>>>>>>>>> MessageStoreImpl::getExternMessage() threw >>>>>>>>>>>>>>>>>>>> JERR__NOTIMPL: >>>>>>>>>>>>>>>>>>>> Not >>>>>>>>>>>>>>>>>>>> implemented >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> (/tmp/qpid-cpp-0.28/src/qpid/legacystore/MessageStoreImpl.cpp:1059) >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Fri, Sep 11, 2015 at 12:08 PM, < >>>>>>>>>>>>>>>>>>>> [email protected]> >>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Hi! This is the ezmlm program. I'm managing the >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> [email protected] mailing list. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> I'm working for my owner, who can be reached >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> at [email protected]. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Acknowledgment: I have added the address >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> [email protected] >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> to the users mailing list. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Welcome to [email protected]! >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Please save this message so that you know the address >>>>>>>>>>>>>>>>>>>>> you >>>>>>>>>>>>>>>>>>>>> are >>>>>>>>>>>>>>>>>>>>> subscribed under, in case you later want to >>>>>>>>>>>>>>>>>>>>> unsubscribe or >>>>>>>>>>>>>>>>>>>>> change >>>>>>>>>>>>>>>>>>>>> your >>>>>>>>>>>>>>>>>>>>> subscription address. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> --- Administrative commands for the users list --- >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I can handle administrative requests automatically. >>>>>>>>>>>>>>>>>>>>> Please >>>>>>>>>>>>>>>>>>>>> do not send them to the list address! Instead, send >>>>>>>>>>>>>>>>>>>>> your message to the correct command address: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> To subscribe to the list, send a message to: >>>>>>>>>>>>>>>>>>>>> <[email protected]> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> To remove your address from the list, send a message >>>>>>>>>>>>>>>>>>>>> to: >>>>>>>>>>>>>>>>>>>>> <[email protected]> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Send mail to the following for info and FAQ for this >>>>>>>>>>>>>>>>>>>>> list: >>>>>>>>>>>>>>>>>>>>> <[email protected]> >>>>>>>>>>>>>>>>>>>>> <[email protected]> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Similar addresses exist for the digest list: >>>>>>>>>>>>>>>>>>>>> <[email protected]> >>>>>>>>>>>>>>>>>>>>> <[email protected]> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> To get messages 123 through 145 (a maximum of 100 per >>>>>>>>>>>>>>>>>>>>> request), >>>>>>>>>>>>>>>>>>>>> mail: >>>>>>>>>>>>>>>>>>>>> <[email protected]> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> To get an index with subject and author for messages >>>>>>>>>>>>>>>>>>>>> 123-456 , >>>>>>>>>>>>>>>>>>>>> mail: >>>>>>>>>>>>>>>>>>>>> <[email protected]> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> They are always returned as sets of 100, max 2000 per >>>>>>>>>>>>>>>>>>>>> request, >>>>>>>>>>>>>>>>>>>>> so you'll actually get 100-499. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> To receive all messages with the same subject as >>>>>>>>>>>>>>>>>>>>> message >>>>>>>>>>>>>>>>>>>>> 12345, >>>>>>>>>>>>>>>>>>>>> send a short message to: >>>>>>>>>>>>>>>>>>>>> <[email protected]> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> The messages should contain one line or word of text to >>>>>>>>>>>>>>>>>>>>> avoid >>>>>>>>>>>>>>>>>>>>> being >>>>>>>>>>>>>>>>>>>>> treated as sp@m, but I will ignore their content. >>>>>>>>>>>>>>>>>>>>> Only the ADDRESS you send to is important. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> You can start a subscription for an alternate address, >>>>>>>>>>>>>>>>>>>>> for example "[email protected]", just add a hyphen and >>>>>>>>>>>>>>>>>>>>> your >>>>>>>>>>>>>>>>>>>>> address (with '=' instead of '@') after the command >>>>>>>>>>>>>>>>>>>>> word: >>>>>>>>>>>>>>>>>>>>> <[email protected]> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> To stop subscription for this address, mail: >>>>>>>>>>>>>>>>>>>>> <[email protected]> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> In both cases, I'll send a confirmation message to that >>>>>>>>>>>>>>>>>>>>> address. When >>>>>>>>>>>>>>>>>>>>> you receive it, simply reply to it to complete your >>>>>>>>>>>>>>>>>>>>> subscription. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> If despite following these instructions, you do not get >>>>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>>>> desired results, please contact my owner at >>>>>>>>>>>>>>>>>>>>> [email protected]. Please be patient, my >>>>>>>>>>>>>>>>>>>>> owner >>>>>>>>>>>>>>>>>>>>> is a >>>>>>>>>>>>>>>>>>>>> lot slower than I am ;-) >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> --- Enclosed is a copy of the request I received. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Return-Path: <[email protected]> >>>>>>>>>>>>>>>>>>>>> Received: (qmail 64240 invoked by uid 99); 11 Sep 2015 >>>>>>>>>>>>>>>>>>>>> 19:08:13 >>>>>>>>>>>>>>>>>>>>> -0000 >>>>>>>>>>>>>>>>>>>>> Received: from Unknown (HELO spamd2-us-west.apache.org >>>>>>>>>>>>>>>>>>>>> ) >>>>>>>>>>>>>>>>>>>>> (209.188.14.142) >>>>>>>>>>>>>>>>>>>>> by apache.org (qpsmtpd/0.29) with ESMTP; >>>>>>>>>>>>>>>>>>>>> Fri, >>>>>>>>>>>>>>>>>>>>> 11 >>>>>>>>>>>>>>>>>>>>> Sep >>>>>>>>>>>>>>>>>>>>> 2015 >>>>>>>>>>>>>>>>>>>>> 19:08:13 >>>>>>>>>>>>>>>>>>>>> +0000 >>>>>>>>>>>>>>>>>>>>> Received: from localhost (localhost [127.0.0.1]) >>>>>>>>>>>>>>>>>>>>> by spamd2-us-west.apache.org (ASF Mail >>>>>>>>>>>>>>>>>>>>> Server >>>>>>>>>>>>>>>>>>>>> at >>>>>>>>>>>>>>>>>>>>> spamd2-us-west.apache.org) with ESMTP id 0857B1A1784 >>>>>>>>>>>>>>>>>>>>> for >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> <users-sc.1441998136.nigfplgkhajmihpcppnj-rammohanganap= >>>>>>>>>>>>>>>>>>>>> [email protected]>; Fri, 11 Sep 2015 19:08:13 >>>>>>>>>>>>>>>>>>>>> +0000 >>>>>>>>>>>>>>>>>>>>> (UTC) >>>>>>>>>>>>>>>>>>>>> X-Virus-Scanned: Debian amavisd-new at >>>>>>>>>>>>>>>>>>>>> spamd2-us-west.apache.org >>>>>>>>>>>>>>>>>>>>> X-Spam-Flag: NO >>>>>>>>>>>>>>>>>>>>> X-Spam-Score: 2.898 >>>>>>>>>>>>>>>>>>>>> X-Spam-Level: ** >>>>>>>>>>>>>>>>>>>>> X-Spam-Status: No, score=2.898 tagged_above=-999 >>>>>>>>>>>>>>>>>>>>> required=6.31 >>>>>>>>>>>>>>>>>>>>> tests=[DKIM_SIGNED=0.1, DKIM_VALID=-0.1, >>>>>>>>>>>>>>>>>>>>> DKIM_VALID_AU=-0.1, >>>>>>>>>>>>>>>>>>>>> HTML_MESSAGE=3, >>>>>>>>>>>>>>>>>>>>> RCVD_IN_MSPIKE_H2=-0.001, >>>>>>>>>>>>>>>>>>>>> SPF_PASS=-0.001] >>>>>>>>>>>>>>>>>>>>> autolearn=disabled >>>>>>>>>>>>>>>>>>>>> Authentication-Results: spamd2-us-west.apache.org >>>>>>>>>>>>>>>>>>>>> (amavisd-new); >>>>>>>>>>>>>>>>>>>>> dkim=pass (2048-bit key) header.d= >>>>>>>>>>>>>>>>>>>>> gmail.com >>>>>>>>>>>>>>>>>>>>> Received: from mx1-us-east.apache.org ([10.40.0.8]) >>>>>>>>>>>>>>>>>>>>> by localhost (spamd2-us-west.apache.org >>>>>>>>>>>>>>>>>>>>> [10.40.0.9]) >>>>>>>>>>>>>>>>>>>>> (amavisd-new, port 10024) >>>>>>>>>>>>>>>>>>>>> with ESMTP id qtM4JX9YicTO >>>>>>>>>>>>>>>>>>>>> for >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> <users-sc.1441998136.nigfplgkhajmihpcppnj-rammohanganap= >>>>>>>>>>>>>>>>>>>>> [email protected]>; >>>>>>>>>>>>>>>>>>>>> Fri, 11 Sep 2015 19:08:11 +0000 (UTC) >>>>>>>>>>>>>>>>>>>>> Received: from mail-io0-f170.google.com ( >>>>>>>>>>>>>>>>>>>>> mail-io0-f170.google.com >>>>>>>>>>>>>>>>>>>>> [209.85.223.170]) >>>>>>>>>>>>>>>>>>>>> by mx1-us-east.apache.org (ASF Mail >>>>>>>>>>>>>>>>>>>>> Server >>>>>>>>>>>>>>>>>>>>> at >>>>>>>>>>>>>>>>>>>>> mx1-us-east.apache.org) with ESMTPS id 7616240B1C >>>>>>>>>>>>>>>>>>>>> for >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> <users-sc.1441998136.nigfplgkhajmihpcppnj-rammohanganap= >>>>>>>>>>>>>>>>>>>>> [email protected]>; Fri, 11 Sep 2015 19:08:11 >>>>>>>>>>>>>>>>>>>>> +0000 >>>>>>>>>>>>>>>>>>>>> (UTC) >>>>>>>>>>>>>>>>>>>>> Received: by iofh134 with SMTP id h134so109094958iof.0 >>>>>>>>>>>>>>>>>>>>> for >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> <users-sc.1441998136.nigfplgkhajmihpcppnj-rammohanganap= >>>>>>>>>>>>>>>>>>>>> [email protected]>; Fri, 11 Sep 2015 12:08:11 >>>>>>>>>>>>>>>>>>>>> -0700 >>>>>>>>>>>>>>>>>>>>> (PDT) >>>>>>>>>>>>>>>>>>>>> DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; >>>>>>>>>>>>>>>>>>>>> d=gmail.com; s=20120113; >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> h=mime-version:from:date:message-id:subject:to:content-type; >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> bh=Suzjg/+wE+2hNieTKjikz1A82nA0m6q2IyoxrAEEQYs=; >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> b=XRFuqllruNarbrY/FFtD5g+lJd9Hf+n+NjzKs1N1Ei0nR5GRLhp71eBw3ZYOgN7b4z >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> 2e6+xiIu7iojTFV5AKjdQlLDzm8miB/jNuH2zdfyqMu+VAhPJt89hLr2H/9nbBO1CbGl >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> rfN9t6fgZjuT2tJ0eXCxQUgjmkewhLCFK9dYlrvjIPwZP9UCvxJfzn8vYo9mA3TD8Y/r >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> 2JDrqlhThs3FY9GfahTZofV3rE6MhxGrMPM0ghIOdvwAyA30PrmGsYC7MUknKewEemWr >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Xsgna4paPf/LHf1Rp/JrKY/JXyUC1hyWSuJrrfvmWFeA8Mujz8Ff+H6v16vHBSTEtZ7t >>>>>>>>>>>>>>>>>>>>> Qetg== >>>>>>>>>>>>>>>>>>>>> X-Received: by 10.107.34.7 with SMTP id >>>>>>>>>>>>>>>>>>>>> i7mr6244119ioi.76.1441998491021; >>>>>>>>>>>>>>>>>>>>> Fri, >>>>>>>>>>>>>>>>>>>>> 11 Sep 2015 12:08:11 -0700 (PDT) >>>>>>>>>>>>>>>>>>>>> MIME-Version: 1.0 >>>>>>>>>>>>>>>>>>>>> Received: by 10.79.30.70 with HTTP; Fri, 11 Sep 2015 >>>>>>>>>>>>>>>>>>>>> 12:07:31 >>>>>>>>>>>>>>>>>>>>> -0700 >>>>>>>>>>>>>>>>>>>>> (PDT) >>>>>>>>>>>>>>>>>>>>> From: rammohan ganapavarapu <[email protected]> >>>>>>>>>>>>>>>>>>>>> Date: Fri, 11 Sep 2015 12:07:31 -0700 >>>>>>>>>>>>>>>>>>>>> Message-ID: >>>>>>>>>>>>>>>>>>>>> <CALm_VjhaJ0OrEgGCs9Ewr533wgTMpB2iWuXtygf=CnerBP= >>>>>>>>>>>>>>>>>>>>> [email protected]> >>>>>>>>>>>>>>>>>>>>> Subject: subscribe >>>>>>>>>>>>>>>>>>>>> To: >>>>>>>>>>>>>>>>>>>>> users-sc.1441998136.nigfplgkhajmihpcppnj-rammohanganap= >>>>>>>>>>>>>>>>>>>>> [email protected] >>>>>>>>>>>>>>>>>>>>> Content-Type: multipart/alternative; >>>>>>>>>>>>>>>>>>>>> boundary=001a1140f36ad31db6051f7d6f91 >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> --------------------------------------------------------------------- >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> To unsubscribe, e-mail: >>>>>>>>>>>>>>>>>>> [email protected] >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> For additional commands, e-mail: >>>>>>>>>>>>>>>>>>> [email protected] >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> --------------------------------------------------------------------- >>>>>>>>>>>>>>>> To unsubscribe, e-mail: [email protected] >>>>>>>>>>>>>>>> For additional commands, e-mail: [email protected] >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>> --------------------------------------------------------------------- >>>>>>>>>>>>> To unsubscribe, e-mail: [email protected] >>>>>>>>>>>>> For additional commands, e-mail: [email protected] >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>> --------------------------------------------------------------------- >>>>>>>> To unsubscribe, e-mail: [email protected] >>>>>>>> For additional commands, e-mail: [email protected] >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> --------------------------------------------------------------------- >>>>>>>> >>>>>>> To unsubscribe, e-mail: [email protected] >>>>>> For additional commands, e-mail: [email protected] >>>>>> >>>>>> >>>>>> >>>>>> >>>> --------------------------------------------------------------------- >>>> To unsubscribe, e-mail: [email protected] >>>> For additional commands, e-mail: [email protected] >>>> >>>> >>>> >> >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: [email protected] >> For additional commands, e-mail: [email protected] >> >> >
