Hi Adel, I added a new script that uses openssl to create server and client certificates signed by a root CA.
https://github.com/apache/qpid-dispatch/blob/master/tests/ssl_certs/gencerts_openssl.sh I tested this using the following router config - ssl-profile { certFile: /home/gmurthy/opensource/dispatch/etc/ssl-my-certs/root/ca1/server-certificate.pem keyFile: /home/gmurthy/opensource/dispatch/etc/ssl-my-certs/root/ca1/server-private-key.pem password: server-password name: server-ssl-profile certDb: /home/gmurthy/opensource/dispatch/etc/ssl-my-certs/root/ca1/ca-certificate.pem } listener { ssl-profile: server-ssl-profile authenticatePeer: yes saslMechanisms: EXTERNAL role: normal addr: 127.0.0.1 port: amqp } I ran qdstat with a client cert to verify - [gmurthy@localhost ca1]$ qdstat -c --ssl-trustfile=/home/gmurthy/opensource/dispatch/etc/ssl-my-certs/root/ca1/ca-certificate.pem --ssl-certificate=/home/gmurthy/opensource/dispatch/etc/ssl-my-certs/root/ca1/client-certificate.pem --ssl-key=/home/gmurthy/opensource/dispatch/etc/ssl-my-certs/root/ca1/client-private-key.pem --ssl-password=client-password Connections Id host container role dir security authentication ===================================================================================================================================================================================== 1 localhost.localdomain:34160 02c3bf84-47de-4838-8282-6e7e8a5dde9c normal in TLSv1/SSLv3(DHE-RSA-AES256-GCM-SHA384) CN=127.0.0.1,O=Client,L=San Francisco,ST=CA,C=US(x.509) [gmurthy@localhost ca1]$ Thanks. ----- Original Message ----- > From: "Ganesh Murthy" <[email protected]> > To: [email protected] > Sent: Thursday, June 23, 2016 10:17:06 AM > Subject: Re: [Qpid-Dispatch] SSL/SASL configuration on a listener > > I also want to add that there is a file called > qpid-dispatch/tests/ssl_certs/gencerts.sh (thanks Chuck Rolke). This file > has commands that create a root CA and self signed certs. There are several > tests (system_tests_qdstat.py, system_tests_two_routers.py, > system_tests_sasl_plain.py) that use these self signed certs and also cover > various SASL scenarios. > > Thanks. > > ----- Original Message ----- > > From: "Ganesh Murthy" <[email protected]> > > To: [email protected] > > Sent: Thursday, June 23, 2016 10:05:08 AM > > Subject: Re: [Qpid-Dispatch] SSL/SASL configuration on a listener > > > > Hi Adel, > > When creating self signed certificates, it is always a good idea to > > create > > a root CA and use it to sign the server and client certificates. > > > > If you are creating self signed certs in a production environment, I would > > suggest that you create a root CA and use the root CA to create an > > intermediate CA and then use the intermediate CA to create your self signed > > server and client certs. If your client or server certs are compromised, > > you > > can use the root CA to invalidate the intermediate CA which in turn would > > invalidate all certs created using the intermediate CA. This way you can > > make sure that your root CA is never compromised. > > > > Thanks. > > > > ----- Original Message ----- > > > From: "Adel Boutros" <[email protected]> > > > To: [email protected] > > > Sent: Thursday, June 23, 2016 9:56:02 AM > > > Subject: RE: [Qpid-Dispatch] SSL/SASL configuration on a listener > > > > > > Hi Paolo, > > > > > > In that case I think the issue is that my certificates were self-signed > > > so > > > there was no CA. I think this works on the Java Broker thanks to the > > > KeyStore and TrustStore features. > > > > > > I will re-organize my certificates to have a CA which will generate the > > > client and server certificates and test again. > > > > > > Thanks for the helpful explanation! > > > > > > Regards, > > > Adel > > > > > > > From: [email protected] > > > > To: [email protected] > > > > Subject: RE: [Qpid-Dispatch] SSL/SASL configuration on a listener > > > > Date: Thu, 23 Jun 2016 13:31:56 +0000 > > > > > > > > Hi Adel, > > > > > > > > I'm a bit confused of what you are trying to achieve. > > > > > > > > A listener (so acting as a server) can have only one certificate > > > > specified > > > > through certFile parameter (and related keyFile for the private > > > > key). This certificate is issued by the server (listener) to the client > > > > during SSL/TLS handshake in order to provide the server authentication > > > > feature. Of course the server certificate is signed with a CA > > > > certificate. > > > > > > > > In order to have client authentication, the client sends its own > > > > certificate to the server during the handshake. This certificate is > > > > signed > > > > by the same CA certificate used to sign server certificate or another > > > > CA > > > > certificate specified through the trustCerts. > > > > > > > > When the SSL handshake ends and mutual authentication is achieved, the > > > > SASL > > > > handshake starts and using EXTERNAL you are saying that the client was > > > > authenticated in a way external to SASL itself and using the previous > > > > authentication at SSL level. > > > > > > > > It means that the SASL EXTERNAL authentication mechanism is strictly > > > > related with what's happened in the previous SSL handshake so it's > > > > related > > > > to the certificates used for that. > > > > > > > > Paolo. > > > > > > > > Paolo PatiernoSenior Software Engineer (IoT) @ Red Hat > > > > Microsoft MVP on Windows Embedded & IoTMicrosoft Azure Advisor > > > > Twitter : @ppatierno > > > > Linkedin : paolopatierno > > > > Blog : DevExperience > > > > > > > > > From: [email protected] > > > > > To: [email protected] > > > > > Subject: RE: [Qpid-Dispatch] SSL/SASL configuration on a listener > > > > > Date: Thu, 23 Jun 2016 15:16:22 +0200 > > > > > > > > > > It feels like a big puzzle to get SSL with client mutual > > > > > authentication > > > > > working. It would help me a lot if someone can provide a fully > > > > > working > > > > > configuration and how to use it with a JMS client for example. > > > > > I think it could also benefit others i the future > > > > > > > > > > Ganesh had provided me on a different thread, steps to generate > > > > > server > > > > > certificate and use it in the dispatcher. I think something similar > > > > > here > > > > > is the easiest solution. > > > > > > > > > > Regards, > > > > > Adel > > > > > > > > > > > From: [email protected] > > > > > > Date: Thu, 23 Jun 2016 14:27:11 +0200 > > > > > > Subject: Re: [Qpid-Dispatch] SSL/SASL configuration on a listener > > > > > > To: [email protected] > > > > > > > > > > > > I think you have to add the file with client public keys to the > > > > > > certDb > > > > > > option. The trustedCerts parameter is used only to control which > > > > > > public > > > > > > keys will be listed as supported CAs to the clients. > > > > > > > > > > > > Jakub > > > > > > > > > > > > On Thu, Jun 23, 2016 at 11:37 AM, Adel Boutros > > > > > > <[email protected]> > > > > > > wrote: > > > > > > > > > > > > > Ok, So I added the client certificate but it doesn't seem to > > > > > > > work. > > > > > > > I > > > > > > > am > > > > > > > getting an exception in the handshake phase: > > > > > > > > > > > > > > Dispatcher error: ERROR (error) Run Time: Cannot set peer > > > > > > > authentication > > > > > > > > > > > > > > Dispatcher config > > > > > > > ssl-profile { > > > > > > > name: ssl-profile-name > > > > > > > certFile: cert_ssl_encryption.pem > > > > > > > keyFile:key_ssl_encryption.pem > > > > > > > } > > > > > > > > > > > > > > listener { > > > > > > > host: 0.0.0.0 > > > > > > > port: 10398 > > > > > > > saslMechanisms: EXTERNAL > > > > > > > sslProfile: ssl-profile-name > > > > > > > authenticatePeer: yes > > > > > > > requireSsl: yes > > > > > > > trustedCerts: cert_sasl.pem > > > > > > > } > > > > > > > > > > > > > > JMS Client > > > > > > > System.setProperty("javax.net.ssl.trustStore", > > > > > > > resourcePath("trustStore.jks")); > > > > > > > System.setProperty("javax.net.ssl.keyStore", > > > > > > > resourcePath("clientKeyStore.jks")); > > > > > > > System.setProperty("javax.net.ssl.keyStorePassword", "password"); > > > > > > > JmsConnectionFactory jmsConnectionFactory = new > > > > > > > JmsConnectionFactory("amqps://hostname:10398?transport.keyAlias=client"); > > > > > > > Connection connection = jmsConnectionFactory.createConnection(); > > > > > > > > > > > > > > PS: trustStore.jks contains the cert_ssl_encryption.pem and > > > > > > > clientKeyStore.jks contains the sasl certificate (cert_sasl.pem) > > > > > > > which is > > > > > > > aliased by "client" > > > > > > > > > > > > > > Should I merge cert_sasl.pem and cert_ssl_encryption.pem in the > > > > > > > ssl-profile? > > > > > > > > > > > > > > Regards, > > > > > > > Adel > > > > > > > > > > > > > > > Date: Wed, 22 Jun 2016 11:23:16 -0400 > > > > > > > > From: [email protected] > > > > > > > > To: [email protected] > > > > > > > > Subject: Re: [Qpid-Dispatch] SSL/SASL configuration on a > > > > > > > > listener > > > > > > > > > > > > > > > > "Of course I want to use a certificate for SSL encryption > > > > > > > > (provided > > > > > > > > in > > > > > > > the ssl-profile) and a different one for SASL authentication but > > > > > > > on > > > > > > > the > > > > > > > same listener." > > > > > > > > > > > > > > > > Are you saying that you have two pairs of server/client certs > > > > > > > > and > > > > > > > > you > > > > > > > want to use one pair for initial SSL encryption (to encrypt the > > > > > > > entire > > > > > > > exchange) and another pair for SASL EXTERNAL ? If this is the > > > > > > > case, > > > > > > > you can > > > > > > > have only one server side cert per listener which you can specify > > > > > > > in > > > > > > > certFile. > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > > > > From: "Ted Ross" <[email protected]> > > > > > > > > > To: [email protected] > > > > > > > > > Sent: Wednesday, June 22, 2016 10:55:47 AM > > > > > > > > > Subject: Re: [Qpid-Dispatch] SSL/SASL configuration on a > > > > > > > > > listener > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 06/22/2016 10:47 AM, Adel Boutros wrote: > > > > > > > > > > Hello, > > > > > > > > > > > > > > > > > > > > I want to use SASL authentication mechanism using a client > > > > > > > certificate. I > > > > > > > > > > looked at the examples and tests but I didn't quite get > > > > > > > > > > everything. > > > > > > > > > > I know I have to setup a listener with "sasl-mechanisms: > > > > > > > > > > EXTERNAL" > > > > > > > and > > > > > > > > > > "require-peer-auth: yes" but then how do I tell the > > > > > > > > > > dispatcher > > > > > > > > > > which > > > > > > > > > > certificates are accepted and which aren't? > > > > > > > > > > Of course I want to use a certificate for SSL encryption > > > > > > > > > > (provided > > > > > > > in the > > > > > > > > > > ssl-profile) and a different one for SASL authentication > > > > > > > > > > but > > > > > > > > > > on > > > > > > > > > > the > > > > > > > same > > > > > > > > > > listener. > > > > > > > > > > ssl-profile { > > > > > > > > > > name: ssl-profile-name > > > > > > > > > > certFile: cert_ssl_encryption.pem > > > > > > > > > > keyFile: key_ssl_encryption.pem > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > listener { > > > > > > > > > > host: 0.0.0.0 > > > > > > > > > > port: 10399 > > > > > > > > > > sasl-mechanisms: EXTERNAL > > > > > > > > > > ssl-profile: ssl-profile-name > > > > > > > > > > authenticatePeer: yes > > > > > > > > > > requireSsl: yes > > > > > > > > > > } > > > > > > > > > > In the above configuration, where should I add the > > > > > > > > > > "cert_sasl.pem"? > > > > > > > > > > > > > > > > > > > > Regards, > > > > > > > > > > Adel > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > From the qdrouterd.conf man page: > > > > > > > > > > > > > > > > > > Under "listener": > > > > > > > > > > > > > > > > > > trustedCerts (path) > > > > > > > > > This optional setting can be used to reduce the set of > > > > > > > > > available > > > > > > > > > CAs for client authentication. If used, this setting > > > > > > > > > must > > > > > > > > > provide > > > > > > > a > > > > > > > > > path to a PEM file that contains the trusted > > > > > > > > > certificates. > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > To unsubscribe, e-mail: [email protected] > > > > > > > > > For additional commands, e-mail: [email protected] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > To unsubscribe, e-mail: [email protected] > > > > > > > > For additional commands, e-mail: [email protected] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [email protected] > > For additional commands, e-mail: [email protected] > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] > For additional commands, e-mail: [email protected] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
