Check out my branch named beehive Sendt fra min iPhone
> Den 04/04/2015 kl. 14.51 skrev Abdulkhadar Abdulla <[email protected]>: > > I tried this once by setting the RPL_MAX_ROUTING_ENTRIE as 6. The application > complied but it didn't start after flashing the image to the board. I will > try do more experiments on this with different routing entry values. > > Thanks > Abdul > > On Apr 4, 2015 4:44 PM, Lotte Steenbrink <[email protected]> > wrote: > Hi Abdul, > >> Am 04.04.2015 um 06:42 schrieb Abdulkhadar Abdulla <[email protected]>: >> >> Hi, >> >> Thank you. This worked for me. I increased the KERNEL_CONF_STACKSIZE_DEFAULT >> to 2K to make things works for my application. >> >> I see that we have problems in making rpl_udp application working in SAM R21 >> due to the RAM limitation. Is there anyway, we can make this work in the >> platform? > > Have you already tried decreasing RPL_MAX_ROUTING_ENTRIES, if that's possible > for your network size? > > Cheers, > Lotte > >> Thanks >> Abdul >> Date: Sat, 28 Mar 2015 20:15:00 +0530 >> From: [email protected] >> To: [email protected] >> Subject: Re: [riot-users] sixlowapp Ping not working in SAM R21 >> >> Hi Lucas, >> Thank you. I will apply the patch and update you the progress. >> Thanks again. >> Abdul >> On Mar 28, 2015 6:58 PM, =?ISO-8859-1?Q?Lucas_Jen=DF?= <[email protected]> wrote: >> Hi Abdul, >> >> The ping issue should be >> fixed by applying https://github.com/RIOT-OS/RIOT/pull/2727. The next problem >> you might run into with the sixlowapp is that the stacksize settings for the >> SAM R21 board are currently a little conservative, which causes it to run out >> of memory when trying to send a UDP packet with the nc command of the >> sixlowapp. >> This can be “fixed” by increasing the KERNEL_CONF_STACKSIZE_DEFAULT in >> RIOT/cpu/samd21/include/cpu-conf.h - I’ve got it to work by increasing it to >> 1536, but you might have to play around a little. >> >> Cheers, >> Lucas >> >> On 28 Mar 2015, at 14:22, Abdulkhadar Abdulla <[email protected]> wrote: >> >> > Hi All, >> > >> > Recently I started using RIOT on my sam r21 xplained board. When I tried >> > to ping between two boards running the sixlowapp application, the >> > application hangs and I need to reset the board to continue working. Can >> > anybody help me to understand it is so? >> > >> > The log below is taken after enabling debug in ip.c, icmp.c, >> > sixlowshell.c, monitor.c, helper.c, lowpan.c >> > >> > >> > Node 1 (source from ping initiated) >> > ----------- >> > >> > 2015-03-28 18:46:17,399 - INFO # ifconfig >> > 2015-03-28 18:46:17,400 - INFO # >> > 2015-03-28 18:46:17,408 - INFO # Iface 0 HWaddr: 0xa0b9 Channel: 11 >> > PAN ID: 0x0001 >> > 2015-03-28 18:46:17,412 - INFO # EUI-64: >> > 5a-56-03-7a-18-64-e1-f1 >> > 2015-03-28 18:46:17,415 - INFO # Source address mode: short >> > 2015-03-28 18:46:17,417 - INFO # Transceivers: >> > 2015-03-28 18:46:17,419 - INFO # * at86rf231 >> > 2015-03-28 18:46:17,426 - INFO # inet6 addr: >> > fe80::ff:fe00:a0b9/128 scope: local >> > 2015-03-28 18:46:17,434 - INFO # inet6 addr: >> > ff02::1:ff00:a0b9/128 scope: local [multicast] >> > 2015-03-28 18:46:17,441 - INFO # inet6 addr: ff02::1/128 >> > scope: local [multicast] >> > 2015-03-28 18:46:17,446 - INFO # inet6 addr: ::1/128 scope: >> > global >> > 2015-03-28 18:46:17,454 - INFO # inet6 addr: >> > ff02::1:ff00:1/128 scope: local [multicast] >> > 2015-03-28 18:46:17,454 - INFO # >> > ping fe80::ff:fe00:a545 >> > 2015-03-28 18:46:35,255 - INFO # > ping fe80::ff:fe00:a545 >> > 2015-03-28 18:46:35,255 - INFO # >> > 2015-03-28 18:46:35,264 - INFO # INFO: send echo request (id = 0001, seq = >> > 1, data_len = zu) to: u >> > 2015-03-28 18:46:35,279 - INFO # DEBUG(main): >> > /home/alcodex/Aerosense/RIOT/sys/net/network_layer/sixlowpan/ip.c:77 in >> > ipv6_send_packet: Got a packet to send to fe80::ff:fe00:a545 >> > 2015-03-28 18:46:35,284 - INFO # INFO: fe80::ff:fe00:a545 is in nbr cache >> > 2015-03-28 18:46:35,289 - INFO # sixlowpan_lowpan_sendto(0, dest, 2, data, >> > 52) >> > >> > <No response after the above log. The device needs a rest to continue> >> > >> > Node 2 (Target Node for ping) >> > --------- >> > 2015-03-28 18:46:10,645 - INFO # ifconfig >> > 2015-03-28 18:46:10,646 - INFO # >> > 2015-03-28 18:46:10,655 - INFO # Iface 0 HWaddr: 0xa545 Channel: 11 >> > PAN ID: 0x0001 >> > 2015-03-28 18:46:10,658 - INFO # EUI-64: >> > 57-44-39-8a-2d-7a-e6-f1 >> > 2015-03-28 18:46:10,661 - INFO # Source address mode: short >> > 2015-03-28 18:46:10,663 - INFO # Transceivers: >> > 2015-03-28 18:46:10,666 - INFO # * at86rf231 >> > 2015-03-28 18:46:10,672 - INFO # inet6 addr: >> > fe80::ff:fe00:a545/128 scope: local >> > 2015-03-28 18:46:10,680 - INFO # inet6 addr: >> > ff02::1:ff00:a545/128 scope: local [multicast] >> > 2015-03-28 18:46:10,687 - INFO # inet6 addr: ff02::1/128 >> > scope: local [multicast] >> > 2015-03-28 18:46:10,692 - INFO # inet6 addr: ::1/128 scope: >> > global >> > 2015-03-28 18:46:10,700 - INFO # inet6 addr: >> > ff02::1:ff00:1/128 scope: local [multicast] >> > >> > >> > Thanks >> > Abdul >> > _______________________________________________ >> > users mailing list >> > [email protected] >> > http://lists.riot-os.org/mailman/listinfo/users >> >> _______________________________________________ >> users mailing list >> [email protected] >> http://lists.riot-os.org/mailman/listinfo/users >> >> _______________________________________________ users mailing list >> [email protected] http://lists.riot-os.org/mailman/listinfo/users >> _______________________________________________ >> users mailing list >> [email protected] >> http://lists.riot-os.org/mailman/listinfo/users > > _______________________________________________ > users mailing list > [email protected] > http://lists.riot-os.org/mailman/listinfo/users
_______________________________________________ users mailing list [email protected] http://lists.riot-os.org/mailman/listinfo/users
