Thanks for the help! It works now with a little hack in the makefile. Why cc1101 is unspecified / what does this mean in this case? Is it a theoretical problem or it just needs someone to do it? I would like to help in that, where could I start ( I'm kind of new in networks )? What are the missing parts in the driver implementation? Viktor
2016-02-02 17:54 GMT+01:00 Viktor Váczi <[email protected]>: > Hi! > I was able to set up my board + the radio, and the SPI communication is > working. I'm trying to use the gnrc_networking example by a previous email > by kaspar, where he gave the instructions on the setup. > https://lists.riot-os.org/pipermail/users/2015-November/000468.html > > My ifconfig says this: > > fconfig > > Iface 7 HWaddr: 20 Channel: 0 > > MTU:1280 HL:64 6LO RTR IPHC > > Link type: wireless > > inet6 addr: ff02::1/128 scope: local [multicast] > > inet6 addr: fe80::3600:3400:757:3156/64 scope: local > > inet6 addr: ff02::1:ff57:3156/128 scope: local [multicast] > > > > I did exactly the same thing: > ifconfig 7 del fe80::3600:3400:757:3156 > ifconfig 7 add fe80::1 > ifconfig 7 add fe80::1 > > I do the same with the other node with fe80::2 and then I send HELLO with > txtsnd: > txtsnd 7 fe80::2 HELLO! > > 1., Whenever I switch channel, the Channel variable in the ifconfig stays > the same, I don't know if its intended. > > 2., Packets doesn't arrive. But I fired up a debugger, and the radio > receives the packet just fine with a good CRC and everything, but somehow > the networking stack drops it. > Here is my github repo, I've started out with modifying the > stm32f3discovery board: > https://github.com/blaisehorvath/RIOT/tree/master/boards/stm32f3discovery > > 3., There was a step that I should put a IPHC disable in my Makefile.dep: > ifneq (,$(filter cc110x,$(USEMODULE))) > DISABLE_MODULE += gnrc_sixlowpan_iphc > endif > > So I created a Makefile.dep file in my board directory, which I've > included in my Makefile > But the IPHC module compiles, and the ifconfig says it too, I don't really > understand why this step is needed, but I'Ve tried out without it and that > didn't work ( too ). > > 4., When I start my board it sends packets to 0: > > cc110x: snd pkt to 0 payload_length=20 > I don't know why. > Any idea what to do? > Thanks for the help so far! > Viktor >
_______________________________________________ users mailing list [email protected] https://lists.riot-os.org/mailman/listinfo/users
