Hi Pete, I also ran into a similar failure :-) I had to use:
git config url https://git.rtems.org/.insteadOf <https://git.rtems.org/rtems.insteadOf> git://git.rtems.org My IT blocks the git protocol port on our company firewall. You can make this global by adding --global after config in the command above Alex On Wed, May 30, 2018 at 12:58 PM D Peter Siddons <sidd...@bnl.gov> wrote: > Hi Gedare, > That worked, i.e. commenting out the miniconda path and installing > python3.6-dev. So on to the next stop :) > > Processing stopped when building the kernel. At the end of the log file I > see: > > script: 72: export PATH > script: 73: # Default environment set up. > script: 74: LANG=C > script: 75: export LANG > script: 76: unset DISPLAY || : > script: 77: umask 022 > script: 78: cd > "/home/peter/development/rtems/src/rtems-source-builder/rtems/build/arm-rtems5-kernel-5-1" > script: 79: echo "=> arm-rtems5-kernel-5-1:" > script: 80: echo "==> %prep:" > script: 81: source_dir_rtems="rtems-5" > source setup: arm-rtems5-kernel-5-1: source rtems -q -c -n > arm-rtems5-kernel-5-1-5 > making dir: > /home/peter/development/rtems/src/rtems-source-builder/rtems/sources/git > git: reset: git://git.rtems.org/rtems.git > git: checkout: git://git.rtems.org/rtems.git => 5 > error: git command failed (/usr/bin/git): 1 > > I have attached the entire report, FYI. Does this mean that git could not > supply the source? > > Pete. > > > On 05/30/2018 01:01 PM, Gedare Bloom wrote: > > Pete, > > On Wed, May 30, 2018 at 12:19 PM, D Peter Siddons <sidd...@bnl.gov> > <sidd...@bnl.gov> wrote: > > Hi Gedare, > > I didn't get your earlier email (?), but the answer is: > > /home/peter/miniconda3/bin/python3.6 > > so the only way I have 3.6 is through miniconda. Maybe it expects > /usr/bin/python3.6? > > > Odd that my email didn't come through to you. Anyway, since 'which' > finds it, the paths seem correct. Alex' suggestion to install the > development library is a good one however. I have had problems in the > past with mixed Anaconda python installations and Ubuntu distro ones. > I (like you) had the conda in a subdir of my home directory though, so > I found it was easiest for me to just disable the conda paths e.g. by > commenting out > #export PATH="/home/gedare/anaconda3/bin:$PATH" > in my .bashrc was sufficient for me > > Then, I could install/use the Ubuntu distributions Python2/3 packages > without conflicts. > > Gedare > > > Pete. > > > > On 05/30/2018 12:12 PM, Gedare Bloom wrote: > > Alex, > > Yes that also makes sense, thank you. Usually, I've seen that problem > manifest as missing Python.h, but error messages can be vague and > inconsistent. :) > > On Wed, May 30, 2018 at 11:49 AM, Slide <slide.o....@gmail.com> > <slide.o....@gmail.com> wrote: > > I ran into a similar issue and the way I solved it was by installing the > -dev package for Python. For me this was libpython3-dev on Ubuntu. I'm not > sure how to do that with the Anaconda installation, but this may help point > you in the right direction. > > Regards, > > Alex > > On Wed, May 30, 2018 at 6:57 AM Gedare Bloom <ged...@rtems.org> > <ged...@rtems.org> wrote: > > Pete, > > Do you get anything with: > $ which python3.6 > > Probably, it is looking for that invocation command. I ought to try > this, because my Ubuntu does not ship with python3.6 I know, so maybe > it breaks too... hm > > On Mon, May 28, 2018 at 6:23 PM, Siddons, David <sidd...@bnl.gov> > <sidd...@bnl.gov> wrote: > > Hi Amaan, > Actually, /home/peter/miniconda3/bin/python is a soft link to > /home/peter/miniconda3/bin/python3.6 already! Does rsb not follow links? > Pete. > > ________________________________ > From: Amaan Cheval [amaan.che...@gmail.com] > Sent: Monday, May 28, 2018 6:05 PM > To: Siddons, David > Cc: users@rtems.org > Subject: Re: rsb problem with python > > Hey David! > > It looks to me like Anaconda doesn't install the "alias" binaries > specifying > the version (for eg. both "python" and "python3.6"). I believe the fix > in > your case should be as simple as copying your existing binary with the > following command: > > cp /home/peter/miniconda3/bin/python > /home/peter/miniconda3/bin/python3.6 > > > On Tue, May 29, 2018, 3:28 AM Siddons, David <sidd...@bnl.gov> > <sidd...@bnl.gov> wrote: > > While building rsb for arm-rtems I got this problem: > > checking for python... /home/peter/miniconda3/bin/python > checking for python3.6... no > configure: error: python is missing or unusable > Makefile:9095: recipe for target 'configure-gdb' failed > make[1]: *** [configure-gdb] Error 1 > make[1]: Leaving directory > > '/home/peter/development/rtems/src/rtems-source-builder/rtems/build/arm-rtems5-gdb-8.0.1-x86_64-linux-gnu-1/build' > Makefile:848: recipe for target 'all' failed > make: *** [all] Error 2 > shell cmd failed: /bin/sh -ex > > /home/peter/development/rtems/src/rtems-source-builder/rtems/build/arm-rtems5-gdb-8.0.1-x86_64-linux-gnu-1/doit > error: building > > arm-rtems5-gdb-8.0.1-x86_64-linux-gnu-1peter@peter-Latitude-E7240:~/development/rtems/src/rtems-source-builder/rtems$ > > I am running Ubuntu: > > peter@peter-Latitude-E7240:/etc$ lsb_release -a > LSB Version: > > core-9.20160110ubuntu0.2-amd64:core-9.20160110ubuntu0.2-noarch:printing-9.20160110ubuntu0.2-amd64:printing-9.20160110ubuntu0.2-noarch:security-9.20160110ubuntu0.2-amd64:security-9.20160110ubuntu0.2-noarch > Distributor ID: Ubuntu > Description: Ubuntu 16.04.4 LTS > Release: 16.04 > Codename: xenial > > then: > > python -V > Python 3.6.1 :: Continuum Analytics, Inc. > > This comes from an Anaconda installation. If I remove the path entry > which > causes that I get python 2.7, which is the default Ubuntu 16.04 > version. Do > I need to install Python 3.6? > > Pete. > > > _______________________________________________ > users mailing listusers@rtems.orghttp://lists.rtems.org/mailman/listinfo/users > > _______________________________________________ > users mailing listusers@rtems.orghttp://lists.rtems.org/mailman/listinfo/users > > _______________________________________________ > users mailing listusers@rtems.orghttp://lists.rtems.org/mailman/listinfo/users > > . > > > -- > D. Peter Siddons > Detector Development Group Leader > Photon Science Division, NSLS-II, > Bldg. 535B > Brookhaven National Laboratory > Upton, NY 11973 > > email: sidd...@bnl.gov > Phone: (631) 344-2738 > > . > > > > -- > D. Peter Siddons > Detector Development Group Leader > Photon Science Division, NSLS-II, > Bldg. 535B > Brookhaven National Laboratory > Upton, NY 11973 > > email: sidd...@bnl.gov > Phone: (631) 344-2738 > >
_______________________________________________ users mailing list users@rtems.org http://lists.rtems.org/mailman/listinfo/users