Hi, > On 14 Apr 2020, at 3:46, Chris Johns <[email protected]> wrote: > > The tests can be built with an RSB BSP build option or manually with a > configure option. If you have an option present but the tests are not being > built then it is a bug.
In the previous email, I forgot to mention that I’m using the 5.0.0-m2004 snapshot. I’m using the following build command, copied directly from the manual: $ ../source-builder/sb-set-builder --prefix=$HOME/quick-start/rtems/5 \ > --target=sparc-rtems5 --with-rtems-bsp=erc32 --with-rtems-tests=yes > 5/rtems-kernel RTEMS Source Builder - Set Builder, 5.0.0-m2004 Build Set: 5/rtems-kernel config: tools/rtems-kernel-5.cfg package: sparc-rtems5-kernel-erc32-1 download: https://ftp.rtems.org/pub/rtems/releases/5/5.0.0/5.0.0-m2004/sources/rtems-5.0.0-m2004.tar.xz -> sources/rtems-5.0.0-m2004.tar.xz downloading: sources/rtems-5.0.0-m2004.tar.xz - 7.2MB of 7.2MB (100%) building: sparc-rtems5-kernel-erc32-1 sizes: sparc-rtems5-kernel-erc32-1: 2.228GB (installed: 44.410MB) cleaning: sparc-rtems5-kernel-erc32-1 reporting: tools/rtems-kernel-5.cfg -> sparc-rtems5-kernel-erc32-1.txt reporting: tools/rtems-kernel-5.cfg -> sparc-rtems5-kernel-erc32-1.xml installing: sparc-rtems5-kernel-erc32-1 -> /home/anders/quick-start/rtems/5 cleaning: sparc-rtems5-kernel-erc32-1 Build Set: Time 0:07:22.715932 In the rsb-log file, I can see that the test executables are built, but after the build is finished, there are no *.exe files anywhere. Regards, Anders Montonen _______________________________________________ users mailing list [email protected] http://lists.rtems.org/mailman/listinfo/users
