Hi,
After a long absence I decided to have another shot at RTEMS for Zynq devices.
I chose the zc706 board. Installation using RSB went OK. Building the BSP
seemed to go well until this error:
/home/peter/development/rtems/5.1/lib/gcc/arm-rtems5/7.5.0/../../../../arm-rtems5/bin/ld:
/home/peter/development/rtems/5.1/lib/gcc/arm-rtems5/7.5.0/../../../../arm-rtems5/lib/thumb/armv7-a/neon/hard/libc.a(lib_a-init.o):
in function `__libc_init_array':
/home/peter/development/rtems/rtems-source-builder-5.1/rtems/build/arm-rtems5-gcc-7.5.0-newlib-7947581-x86_64-linux-gnu-1/build/arm-rtems5/thumb/armv7-a/neon/hard/newlib/libc/misc/../../../../../../../../../gcc-7.5.0/newlib/libc/misc/init.c:40:
undefined reference to `_init'
collect2: error: ld returned 1 exit status
make[5]: *** [Makefile:631: base_sp.exe] Error 1
make[5]: Leaving directory
'/home/peter/development/kernel/xilinx_zynq_zc706/arm-rtems5/c/xilinx_zynq_zc706/testsuites/samples'
make[4]: *** [Makefile:663: samples] Error 2
make[4]: Leaving directory
'/home/peter/development/kernel/xilinx_zynq_zc706/arm-rtems5/c/xilinx_zynq_zc706/testsuites'
make[3]: *** [Makefile:1342: testsuites] Error 2
make[3]: Leaving directory
'/home/peter/development/kernel/xilinx_zynq_zc706/arm-rtems5/c/xilinx_zynq_zc706'
make[2]: *** [Makefile:822: all-recursive] Error 1
make[2]: Leaving directory
'/home/peter/development/kernel/xilinx_zynq_zc706/arm-rtems5/c/xilinx_zynq_zc706'
make[1]: *** [Makefile:289: all-recursive] Error 1
make[1]: Leaving directory
'/home/peter/development/kernel/xilinx_zynq_zc706/arm-rtems5/c'
make: *** [Makefile:410: all-recursive] Error 1
peter@peter-OptiPlex-7070:~/development/kernel/xilinx_zynq_zc706$
I am building on Ubuntu 20.04. Config.log is attached. Any suggestions?
Pete.
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by rtems configure 6.0.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ../rtems/configure --prefix=/home/peter/development/rtems/5.1 --target=arm-rtems5 --enable-rtemsbsp=xilinx_zynq_zc706 --enable-posix --disable-networking
## --------- ##
## Platform. ##
## --------- ##
hostname = peter-OptiPlex-7070
uname -m = x86_64
uname -r = 5.4.0-73-generic
uname -s = Linux
uname -v = #82-Ubuntu SMP Wed Apr 14 17:39:42 UTC 2021
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/peter/development/rtems/5.1/bin
PATH: /home/peter/.local/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
PATH: /usr/local/epics/base/bin/linux-x86_64
PATH: /usr/local/epics/extensions/bin/linux_x86_64
PATH: /usr/local/epics/base/bin/linux-x86_64
PATH: /usr/local/epics/extensions/bin/linux-x86_64
PATH: /home/peter/development/rtems/5.1/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:1821: checking for gmake
configure:1851: result: no
configure:1821: checking for make
configure:1837: found /usr/bin/make
configure:1848: result: make
configure:1873: checking for RTEMS Version
configure:1875: result: 6.0.0
configure:1905: checking build system type
configure:1919: result: x86_64-pc-linux-gnu
configure:1939: checking host system type
configure:1952: result: x86_64-pc-linux-gnu
configure:1972: checking target system type
configure:1985: result: arm-unknown-rtems5
configure:2027: checking for a BSD-compatible install
configure:2095: result: /usr/bin/install -c
configure:2106: checking whether build environment is sane
configure:2161: result: yes
configure:2310: checking for a thread-safe mkdir -p
configure:2349: result: /bin/mkdir -p
configure:2356: checking for gawk
configure:2372: found /usr/bin/gawk
configure:2383: result: gawk
configure:2394: checking whether make sets $(MAKE)
configure:2416: result: yes
configure:2494: checking whether to enable maintainer-specific portions of Makefiles
configure:2503: result: no
configure:2878: checking that generated files are newer than configure
configure:2884: result: done
configure:3050: creating ./config.status
configure:4080: configuring in arm-rtems5/c
configure:4167: running /bin/sh '../../../rtems/c/configure' '--prefix=/home/peter/development/rtems/5.1' '--host=arm-rtems5' '--build=x86_64-pc-linux-gnu' '--target=arm-rtems5' '--enable-rtemsbsp=xilinx_zynq_zc706' '--enable-posix' '--disable-networking' '--with-target-subdir=arm-rtems5' '--exec-prefix=/home/peter/development/rtems/5.1/arm-rtems5' '--includedir=/home/peter/development/rtems/5.1/arm-rtems5/include' '--cache-file=/dev/null' '--srcdir=../../../rtems/c'
## ---------------------- ##
## Running config.status. ##
## ---------------------- ##
This file was extended by rtems config.status 6.0.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES =
CONFIG_HEADERS =
CONFIG_LINKS =
CONFIG_COMMANDS =
$ ./config.status
on peter-OptiPlex-7070
config.status:769: creating Makefile
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=x86_64-pc-linux-gnu
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=set
ac_cv_env_target_alias_value=arm-rtems5
ac_cv_host=x86_64-pc-linux-gnu
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_MAKE=make
ac_cv_prog_make_make_set=yes
ac_cv_target=arm-unknown-rtems5
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL='${SHELL} /home/peter/development/kernel/rtems/missing --run aclocal-1.12'
AMTAR='$${TAR-tar}'
AUTOCONF='${SHELL} /home/peter/development/kernel/rtems/missing --run autoconf'
AUTOHEADER='${SHELL} /home/peter/development/kernel/rtems/missing --run autoheader'
AUTOMAKE='${SHELL} /home/peter/development/kernel/rtems/missing --run automake-1.12'
AWK='gawk'
CYGPATH_W='echo'
DEFS='-DPACKAGE_NAME=\"rtems\" -DPACKAGE_TARNAME=\"rtems\" -DPACKAGE_VERSION=\"6.0.0\" -DPACKAGE_STRING=\"rtems\ 6.0.0\" -DPACKAGE_BUGREPORT=\"https://devel.rtems.org/newticket\"; -DPACKAGE_URL=\"\"'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LIBOBJS=''
LIBS=''
LTLIBOBJS=''
MAINT='#'
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE='#'
MAKE='make'
MAKEINFO='${SHELL} /home/peter/development/kernel/rtems/missing --run makeinfo'
MKDIR_P='/bin/mkdir -p'
PACKAGE='rtems'
PACKAGE_BUGREPORT='https://devel.rtems.org/newticket'
PACKAGE_NAME='rtems'
PACKAGE_STRING='rtems 6.0.0'
PACKAGE_TARNAME='rtems'
PACKAGE_URL=''
PACKAGE_VERSION='6.0.0'
PATH_SEPARATOR=':'
PROJECT_ROOT='./$(top_builddir)'
PROJECT_TOPdir='./$(top_builddir)'
RTEMS_BUILD_ROOT=''
RTEMS_HAS_NETWORKING='no'
RTEMS_HAS_POSIX_API='yes'
RTEMS_SOURCE_ROOT=''
RTEMS_TOPdir='.'
SET_MAKE=''
SHELL='/bin/sh'
STRIP=''
VERSION='6.0.0'
am__isrc=' -I$(srcdir)'
am__leading_dot='.'
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build='x86_64-pc-linux-gnu'
build_SUBDIRS=''
build_alias=''
build_cpu='x86_64'
build_os='linux-gnu'
build_subdir='.'
build_vendor='pc'
buildargs=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='${prefix}'
host='x86_64-pc-linux-gnu'
host_SUBDIRS=''
host_alias=''
host_cpu='x86_64'
host_os='linux-gnu'
host_subdir=''
host_vendor='pc'
hostargs=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /home/peter/development/kernel/rtems/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
pkgdatadir='${datarootdir}/rtems6'
prefix='/home/peter/development/rtems/5.1'
program_transform_name='s&^&arm-rtems5-&'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target='arm-unknown-rtems5'
target_SUBDIRS=' arm-rtems5/c'
target_alias='arm-rtems5'
target_configdirs=' c'
target_cpu='arm'
target_os='rtems5'
target_subdir='arm-rtems5'
target_vendor='unknown'
targetargs=''\''--host=arm-rtems5'\'' '\''--build=x86_64-pc-linux-gnu'\'' '\''--target=arm-rtems5'\'' '\''--enable-rtemsbsp=xilinx_zynq_zc706'\'' '\''--enable-posix'\'' '\''--disable-networking'\'''
## ----------- ##
## confdefs.h. ##
## ----------- ##
/* confdefs.h */
#define PACKAGE_NAME "rtems"
#define PACKAGE_TARNAME "rtems"
#define PACKAGE_VERSION "6.0.0"
#define PACKAGE_STRING "rtems 6.0.0"
#define PACKAGE_BUGREPORT "https://devel.rtems.org/newticket";
#define PACKAGE_URL ""
configure: exit 0
_______________________________________________
users mailing list
users@rtems.org
http://lists.rtems.org/mailman/listinfo/users
