Thanks for the response. However, I think I need a little clarification. In https://docs.rtems.org/branches/master/user/start/app.html, it says:
./waf configure --rtems=$HOME/quick-start/rtems/6 --rtems-bsp=sparc/erc32 My prefix is: '$HOME/src/rtems', so I used ' ./waf configure --rtems=$HOME/src/rtems/quick-start/rtems/6 --rtems-bsp=sparc/erc32'. I believe this is equivalent to what you suggested, except that you have '--rtems-bsps' instead of '--rtems-bsp' (I think mine is the correct syntax). As for "pointing to the share directory', I didn't do that - that was the error message printed when I tried to configure. I'm not sure what you mean by pointing to the wrong directories - I followed the web page directions specifically. However, I also admit I may have done something incorrectly, so if you could point to the thing I should change, I'm glad to do so :-) Thanks again, Brett ________________________________ From: Joel Sherrill <j...@rtems.org> Sent: Tuesday, July 11, 2023 9:24 AM To: Brett Sterling <brett.sterl...@odysseysr.com> Cc: users@rtems.org <users@rtems.org> Subject: Re: Hello world fails CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. On Tue, Jul 11, 2023 at 8:35 AM Brett Sterling <brett.sterl...@odysseysr.com<mailto:brett.sterl...@odysseysr.com>> wrote: I've been working my way through the 'Quick Start' and everything was going pretty well until https://docs.rtems.org/branches/master/user/start/app.html<https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Fdocs.rtems.org%2Fbranches%2Fmaster%2Fuser%2Fstart%2Fapp.html&data=05%7C01%7C%7C9a9d0447d98344cc537b08db8222f881%7Cd761ffacf6be45b88f6f288a59577095%7C0%7C0%7C638246858946228580%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=Dtgvw78TAZm5ncZnXGqqzGYs6jVioD%2Bn441t34HP%2F%2Bw%3D&reserved=0>. I get to the point where I'm supposed to 'configure', and I get the following: ~/src/rtems/quick-start/app/hello$ ./waf configure --rtems=$HOME/src/rtems/quick-start/rtems/6 --rtems-bsp=sparc/erc32 Setting top to : /home/bsterling/src/rtems/quick-start/app/hello Setting out to : /home/bsterling/src/rtems/quick-start/app/hello/build RTEMS path is not valid, "/home/bsterling/src/rtems/quick-start/rtems/6/share/rtems6" not found. (complete log in /home/bsterling/src/rtems/quick-start/app/hello/build/config.log) I have this in my handy scripts for building rtems-examples: CPU=powerpc BSP=psim ./waf configure --rtems=${HOME}/rtems-work/tools/6/bsp-install \ --rtems-tools=${HOME}/rtems-work/tools/6 \ --rtems-bsps=${CPU}/${BSP} That --rtems points to the --prefix directory you used when you built and installed RTEMS. This is from my install: $ pwd /home/joel/rtems-work/tools/6/bsp-install/sparc-rtems6/leon3 $ ls lib make Makefile.inc --rtems-tools directory should have a bin/TARGET-gcc under it. --rtems-bsps looks OK I think you have just pointed to the wrong directories. It should be similar to how I build rtems-examples. --joel I have verified that all of the source files contain only what is described on that page. When I look in the rtems/6/share directory, I have the following: ~/src/rtems/quick-start/rtems/6/share$ ls -l total 32 drwxr-xr-x 3 bsterling osr 4096 Jul 10 14:39 doc drwxr-xr-x 3 bsterling osr 4096 Jul 10 15:00 gcc-12.3.1 drwxr-xr-x 5 bsterling osr 4096 Jul 10 15:02 gdb drwxr-xr-x 2 bsterling osr 4096 Jul 10 15:01 iconv_data drwxr-xr-x 2 bsterling osr 4096 Jul 10 15:02 info drwxr-xr-x 2 bsterling osr 4096 Jul 10 14:43 locale drwxr-xr-x 5 bsterling osr 4096 Jul 10 15:00 man drwxr-xr-x 9 bsterling osr 4096 Jul 10 15:02 rtems Normally you don't point all the way down to share directory I tried renaming 'rtems' to 'rtems6', but that resulted in the following errors: ~/src/rtems/quick-start/app/hello$ ./waf configure --rtems=$HOME/src/rtems/quick-start/rtems/6 --rtems-bsp=sparc/erc32 Setting top to : /home/bsterling/src/rtems/quick-start/app/hello Setting out to : /home/bsterling/src/rtems/quick-start/app/hello/build Traceback (most recent call last): File "/home/bsterling/src/rtems/quick-start/app/hello/.waf3-2.0.19-1f3c580272b15a03d2566843c5fe872a/waflib/Scripting.py", line 119, in waf_entry_point run_commands() File "/home/bsterling/src/rtems/quick-start/app/hello/.waf3-2.0.19-1f3c580272b15a03d2566843c5fe872a/waflib/Scripting.py", line 182, in run_commands ctx=run_command(cmd_name) File "/home/bsterling/src/rtems/quick-start/app/hello/.waf3-2.0.19-1f3c580272b15a03d2566843c5fe872a/waflib/Scripting.py", line 173, in run_command ctx.execute() File "/home/bsterling/src/rtems/quick-start/app/hello/.waf3-2.0.19-1f3c580272b15a03d2566843c5fe872a/waflib/Configure.py", line 85, in execute super(ConfigurationContext,self).execute() File "/home/bsterling/src/rtems/quick-start/app/hello/.waf3-2.0.19-1f3c580272b15a03d2566843c5fe872a/waflib/Context.py", line 92, in execute self.recurse([os.path.dirname(g_module.root_path)]) File "/home/bsterling/src/rtems/quick-start/app/hello/.waf3-2.0.19-1f3c580272b15a03d2566843c5fe872a/waflib/Context.py", line 133, in recurse user_function(self) File "/home/bsterling/src/rtems/quick-start/app/hello/wscript", line 26, in configure rtems.configure(conf, bsp_configure = bsp_configure) File "/home/bsterling/src/rtems/quick-start/app/hello/rtems_waf/rtems.py", line 190, in configure check_options(conf, File "/home/bsterling/src/rtems/quick-start/app/hello/rtems_waf/rtems.py", line 496, in check_options arch_bsps = _check_arch_bsps(rtems_bsps, rtems_config, rtems_path, File "/home/bsterling/src/rtems/quick-start/app/hello/rtems_waf/rtems.py", line 851, in _check_arch_bsps installed = _find_installed_arch_bsps(config, path, archs, version) File "/home/bsterling/src/rtems/quick-start/app/hello/rtems_waf/rtems.py", line 823, in _find_installed_arch_bsps if _arch_from_arch_bsp(f[:-3]) in archs: File "/home/bsterling/src/rtems/quick-start/app/hello/rtems_waf/rtems.py", line 862, in _arch_from_arch_bsp rtems_field_index = next(i for i, field in enumerate(fields) if field.startswith('rtems')) StopIteration Please note that I started with rtems 6 because when I tried to use the released rtems 5 'Getting Started', I couldn't get past the first few steps. That being said, I'm glad to go back to any other version if necessary, as I'm just trying to get to the point where I can work with RTEMS. Thanks in advance for any help! I'm using Ubuntu 22.04.2 LTS, and have followed the instructions in the 'Host Machine' setup section (as I mentioned, everything was working great up until this step). The only way I was able to get things working was to clone the git repositories. I'm on the 'master' branch. _______________________________________________ users mailing list users@rtems.org<mailto:users@rtems.org> http://lists.rtems.org/mailman/listinfo/users<https://usg02.safelinks.protection.office365.us/?url=http%3A%2F%2Flists.rtems.org%2Fmailman%2Flistinfo%2Fusers&data=05%7C01%7C%7C9a9d0447d98344cc537b08db8222f881%7Cd761ffacf6be45b88f6f288a59577095%7C0%7C0%7C638246858946228580%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=2RYIKaz6I6sGlEaCbrzvemW%2Bmqo65q8%2BVzKPlS5b1kQ%3D&reserved=0>
_______________________________________________ users mailing list users@rtems.org http://lists.rtems.org/mailman/listinfo/users