OK. Glad to help! When we're discussing the variables in the rtpp_defines.h file, what does
#define LBR_THRS mean? The other variables I understand... Regards, Ronald -----Oorspronkelijk bericht----- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Maxim Sobolev Verzonden: woensdag 13 augustus 2008 20:43 Aan: RTPproxy Users Onderwerp: Re: [RTPproxy Users] About Jitter Ronald Voermans wrote: > Maksym, > > That seemed to do the trick. I increased the POLL_LIMIT to 500, and all the > jitter I experienced is over. Looks like it still was a problem of our ITSP > (who uses a Cirpack platform), because their jitterbuffer was set at 120ms, > which should be more than enough for the jitter we were experiencing. But > changing the POLL_LIMIT made the problems go away!!! > > What could be the maximum setting for the POLL_LIMIT? Glad to hear that. The reasonable values are within range 100-1000. Above 1000 it should make no measurable difference on additional jitter introduced by the proxy. I would consider increasing default value 2-3 times in the next release, thank you for your input! Regards, -- Maksym Sobolyev Sippy Software, Inc. Internet Telephony (VoIP) Experts T/F: +1-646-651-1110 Web: http://www.sippysoft.com _______________________________________________ Users mailing list Users@rtpproxy.org http://lists.rtpproxy.org/mailman/listinfo/users _______________________________________________ Users mailing list Users@rtpproxy.org http://lists.rtpproxy.org/mailman/listinfo/users
