Dear Kamailio users, I have a problem with using rtpproxy and the next_gw function: when the first gateway is for whatever reason unavailable, the next gateway is selected. I use rtpproxy for all calls, so when the next gateway is selected, the force_rtp_proxy function is called again.
I use this function with the following parameters: faroc. Next to that, rtpproxy is running in bridged mode, so the function also has the additional parameters I or E. When the first gateway is available, everything goes ok. However when the next gateway is selected, there are some errors in the SDP-message: v=0. o=- 104514515 104514515 IN IP4 10.254.254.110.254.254.1. s=-. c=IN IP4 10.254.254.110.254.254.1. t=0 0. m=audio 5397453976 RTP/AVP 18 0 8 100 101. a=rtpmap:18 G729/8000. a=fmtp:18 annexb=no a=rtpmap:0 PCMU/8000. a=rtpmap:8 PCMA/8000. a=rtpmap:100 NSE/8000. a=fmtp:100 192-193. a=rtpmap:101 telephone-event/8000. a=fmtp:101 0-15. a=ptime:20. a=sendrecv. a=nortpproxy:yes. a=nortpproxy:yes. As you can see, the 'o' and 'c' line are wrong. It is not an option to disable the function force_rtp_proxy again, because the other gateway can be on the external interface instead of the internal (so there is a change in I or E when calling force_rtp_proxy again). I tried to use the function unforce_rtp_proxy in my failure_route, but this also didn't change anything. Thanks for your time and help! Regards, Ronald Voermans _______________________________________________ Users mailing list Users@rtpproxy.org http://lists.rtpproxy.org/mailman/listinfo/users
