Hi MJ,
Thank you for your advice. I changed it to 32 as your suggestion.
Only wait and see.
Somsak
On Wednesday, June 19, 2013 22:59 ICT, mourik jan heupink <heup...@gmail.com>
wrote:
> Hi Somsak,
>
> When we had problems like these, we were told to increase our
> WOWorkersCount. We have now set
>
> WOWorkersCount = 32;
>
> in our /etc/sogo/sogo.conf
>
> And we have not seen the 100% cpu usage ever since.
>
> Hope it helps you too.
>
> MJ
>
> On 6/19/2013 12:38, Sogo Thailand wrote:
> > Hi all
> >
> > We have around 15 users access to email server. I found that SOGos use 100%
> > CPU.
> > SOGo is running on SME Server 8.0
> > Our netstat command show.
> >
> > Active Internet connections (w/o servers)
> > Proto Recv-Q Send-Q Local Address Foreign Address
> > State
> > tcp 0 0 localhost:20000 localhost:46156
> > FIN_WAIT2
> > tcp 0 0 localhost:20000 localhost:46157
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46155
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46153
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46150
> > FIN_WAIT2
> > tcp 0 0 localhost:20000 localhost:46148
> > FIN_WAIT2
> > tcp 0 0 localhost:20000 localhost:46149
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46170
> > FIN_WAIT2
> > tcp 0 0 localhost:20000 localhost:46171
> > FIN_WAIT2
> > tcp 0 0 localhost:20000 localhost:46168
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46166
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46165
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46162
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46163
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46160
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46161
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46094
> > TIME_WAIT
> > tcp 0 0 mail2.eicm.com:https pc-00009.eicm.com:4421
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46095
> > TIME_WAIT
> > tcp 0 0 mail2.eicm.com:https pc-00009.eicm.com:4422
> > TIME_WAIT
> > tcp 0 0 localhost:49786 localhost:ldap
> > TIME_WAIT
> > tcp 0 0 localhost:49787 localhost:ldap
> > TIME_WAIT
> > tcp 0 0 localhost:50528 localhost:imap
> > TIME_WAIT
> > tcp 0 0 localhost:50556 localhost:imap
> > TIME_WAIT
> > tcp 0 0 mail2.eicm.com:imaps pc-00009.eicm.com:62796
> > ESTABLISHED
> > tcp 0 0 localhost:20000 localhost:46083
> > TIME_WAIT
> > tcp 0 0 localhost:11211 localhost:48506
> > ESTABLISHED
> > tcp 0 0 localhost:20000 localhost:46111
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46108
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46106
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46102
> > FIN_WAIT2
> > tcp 0 0 localhost:20000 localhost:46103
> > FIN_WAIT2
> > tcp 0 0 mail2.eicm.com:https node-qol.pool-180-180:25567
> > ESTABLISHED
> > tcp 0 0 localhost:20000 localhost:46127
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46124
> > FIN_WAIT2
> > tcp 0 0 mail2.eicm.com:https node-qol.pool-180-180:25568
> > TIME_WAIT
> > tcp 0 0 localhost:11211 localhost:48463
> > ESTABLISHED
> > tcp 0 0 localhost:20000 localhost:46123
> > FIN_WAIT2
> > tcp 0 0 mail2.eicm.com:https node-qol.pool-180-180:25579
> > ESTABLISHED
> > tcp 0 0 localhost:20000 localhost:46118
> > FIN_WAIT2
> > tcp 0 0 localhost:20000 localhost:46119
> > TIME_WAIT
> > tcp 0 0 mail2.eicm.com:https pc-00132.eicm.com:4322
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46117
> > TIME_WAIT
> > tcp 0 0 mail2.eicm.com:https pc-00132.eicm.com:4324
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46115
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46113
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46142
> > FIN_WAIT2
> > tcp 0 0 localhost:20000 localhost:46141
> > FIN_WAIT2
> > tcp 0 0 localhost:11211 localhost:48479
> > ESTABLISHED
> > tcp 0 0 mail2.eicm.com:https pc-00083.eicm.com:53802
> > TIME_WAIT
> > tcp 0 0 localhost:48479 localhost:11211
> > ESTABLISHED
> > tcp 0 0 localhost:48463 localhost:11211
> > ESTABLISHED
> > tcp 0 0 mail2.eicm.com:https pc-00083.eicm.com:53801
> > TIME_WAIT
> > tcp 0 0 localhost:48506 localhost:11211
> > ESTABLISHED
> > tcp 0 0 mail2.eicm.com:https pc-00133.eicm.com:2559
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46136
> > FIN_WAIT2
> > tcp 0 0 mail2.eicm.com:https pc-00083.eicm.com:53800
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46137
> > FIN_WAIT2
> > tcp 0 0 localhost:20000 localhost:46132
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46133
> > FIN_WAIT2
> > tcp 0 0 localhost:20000 localhost:46131
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46129
> > FIN_WAIT2
> > tcp 0 0 mail2.eicm.com:https pc-00133.eicm.com:2561
> > TIME_WAIT
> > tcp 0 0 mail2.eicm.com:https pc-00102.eicm.com:1531
> > TIME_WAIT
> > tcp 0 0 localhost:46016 localhost:20000
> > CLOSE_WAIT
> > tcp 0 0 mail2.eicm.com:https pc-00102.eicm.com:support
> > TIME_WAIT
> > tcp 0 0 localhost:46062 localhost:20000
> > CLOSE_WAIT
> > tcp 0 0 localhost:46056 localhost:20000
> > ESTABLISHED
> > tcp 1 0 localhost:46059 localhost:20000
> > CLOSE_WAIT
> > tcp 1 0 localhost:45960 localhost:20000
> > CLOSE_WAIT
> > tcp 0 0 localhost:45943 localhost:20000
> > CLOSE_WAIT
> > tcp 1 0 localhost:46170 localhost:20000
> > CLOSE_WAIT
> > tcp 1 0 localhost:46171 localhost:20000
> > CLOSE_WAIT
> > tcp 0 0 localhost:46156 localhost:20000
> > CLOSE_WAIT
> > tcp 1 0 localhost:46150 localhost:20000
> > CLOSE_WAIT
> > tcp 0 0 localhost:46148 localhost:20000
> > CLOSE_WAIT
> > tcp 0 0 localhost:46102 localhost:20000
> > CLOSE_WAIT
> > tcp 1 0 localhost:46103 localhost:20000
> > CLOSE_WAIT
> > tcp 0 0 localhost:46136 localhost:20000
> > CLOSE_WAIT
> > tcp 1 0 localhost:46137 localhost:20000
> > CLOSE_WAIT
> > tcp 1 0 localhost:46142 localhost:20000
> > CLOSE_WAIT
> > tcp 0 0 localhost:46141 localhost:20000
> > CLOSE_WAIT
> > tcp 1 0 localhost:46129 localhost:20000
> > CLOSE_WAIT
> > tcp 1 0 localhost:46133 localhost:20000
> > CLOSE_WAIT
> > tcp 0 0 localhost:46123 localhost:20000
> > CLOSE_WAIT
> > tcp 1 0 localhost:46124 localhost:20000
> > CLOSE_WAIT
> > tcp 1 0 localhost:46118 localhost:20000
> > CLOSE_WAIT
> > tcp 0 0 mail2.eicm.com:https pc-00102.eicm.com:1533
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46038
> > TIME_WAIT
> > tcp 0 0 mail2.eicm.com:https pc-00105.eicm.com:3579
> > TIME_WAIT
> > tcp 0 0 mail2.eicm.com:https pc-00105.eicm.com:3578
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46056
> > ESTABLISHED
> > tcp 0 0 localhost:41550 localhost:783
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46049
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46072
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46070
> > TIME_WAIT
> > tcp 0 0 mail2.eicm.com:https pc-00085.eicm.com:49633
> > TIME_WAIT
> > tcp 0 0 mail2.eicm.com:https pc-00100.eicm.com:1745
> > ESTABLISHED
> > tcp 0 0 mail2.eicm.com:https pc-00085.eicm.com:49632
> > TIME_WAIT
> > tcp 0 0 localhost:20000 localhost:46067
> > TIME_WAIT
> > tcp 0 0 mail2.eicm.com:imaps pc-00139.eicm.com:54852
> > ESTABLISHED
> > tcp 0 0 mail2.eicm.com:https pc-00100.eicm.com:1699
> > ESTABLISHED
> > tcp 0 0 mail2.eicm.com:ssh pc-00016.eicm.com:1229
> > ESTABLISHED
> > tcp 0 0 mail2.eicm.com:https pc-00138.eicm.com:4178
> > TIME_WAIT
> > tcp 0 40 mail2.eicm.com:ssh pc-00016.eicm.com:1223
> > ESTABLISHED
> > tcp 0 0 mail2.eicm.com:https pc-00100.eicm.com:1715
> > ESTABLISHED
> > tcp 0 0 mail2.eicm.com:https pc-00100.eicm.com:1717
> > ESTABLISHED
> > tcp 0 0 mail2.eicm.com:https pc-00100.eicm.:h323gatestat
> > ESTABLISHED
> > Active UNIX domain sockets (w/o servers)
> > Proto RefCnt Flags Type State I-Node Path
> > unix 2 [ ] DGRAM 5559
> > /var/empty/sshd/dev/log
> > unix 2 [ ] DGRAM 1657
> > @/org/kernel/udev/udevd
> > unix 2 [ ] DGRAM 8519
> > @/org/freedesktop/hal/udev_event
> > unix 11 [ ] DGRAM 5557 /dev/log
> > unix 3 [ ] STREAM CONNECTED 19255
> > /var/lib/mysql/mysql.sock
> > unix 3 [ ] STREAM CONNECTED 19254
> > unix 3 [ ] STREAM CONNECTED 18845
> > unix 3 [ ] STREAM CONNECTED 18844
> > unix 2 [ ] DGRAM 18837
> > unix 2 [ ] DGRAM 18437
> > unix 3 [ ] STREAM CONNECTED 18303
> > /var/lib/mysql/mysql.sock
> > unix 3 [ ] STREAM CONNECTED 18302
> > unix 3 [ ] STREAM CONNECTED 17708
> > /var/lib/mysql/mysql.sock
> > unix 3 [ ] STREAM CONNECTED 17707
> > unix 3 [ ] STREAM CONNECTED 17455
> > /var/lib/mysql/mysql.sock
> > unix 3 [ ] STREAM CONNECTED 17454
> > unix 3 [ ] STREAM CONNECTED 16612
> > /var/lib/mysql/mysql.sock
> > unix 3 [ ] STREAM CONNECTED 16611
> > unix 3 [ ] STREAM CONNECTED 11776
> > unix 3 [ ] STREAM CONNECTED 11775
> > unix 3 [ ] STREAM CONNECTED 11774
> > unix 3 [ ] STREAM CONNECTED 11773
> > unix 2 [ ] DGRAM 10692
> > unix 3 [ ] STREAM CONNECTED 10507
> > unix 3 [ ] STREAM CONNECTED 10506
> > unix 3 [ ] STREAM CONNECTED 10386
> > /var/run/dbus/system_bus_socket
> > unix 3 [ ] STREAM CONNECTED 10385
> > unix 2 [ ] DGRAM 10381
> > unix 3 [ ] STREAM CONNECTED 10284
> > @/var/run/hald/dbus-il3yzx53uN
> > unix 3 [ ] STREAM CONNECTED 10283
> > unix 3 [ ] STREAM CONNECTED 10124
> > @/var/run/hald/dbus-il3yzx53uN
> > unix 3 [ ] STREAM CONNECTED 10123
> > unix 3 [ ] STREAM CONNECTED 10107
> > @/var/run/hald/dbus-il3yzx53uN
> > unix 3 [ ] STREAM CONNECTED 10106
> > unix 3 [ ] STREAM CONNECTED 10079
> > @/var/run/hald/dbus-il3yzx53uN
> > unix 3 [ ] STREAM CONNECTED 10078
> > unix 3 [ ] STREAM CONNECTED 10048
> > /var/run/acpid.socket
> > unix 3 [ ] STREAM CONNECTED 10047
> > unix 3 [ ] STREAM CONNECTED 10040
> > @/var/run/hald/dbus-il3yzx53uN
> > unix 3 [ ] STREAM CONNECTED 10005
> > unix 3 [ ] STREAM CONNECTED 8514
> > @/var/run/hald/dbus-2cGm9wocxe
> > unix 3 [ ] STREAM CONNECTED 8513
> > unix 2 [ ] DGRAM 8512
> > unix 3 [ ] STREAM CONNECTED 8440
> > unix 3 [ ] STREAM CONNECTED 8439
> > unix 2 [ ] DGRAM 8406
> > unix 3 [ ] STREAM CONNECTED 8127
> > unix 3 [ ] STREAM CONNECTED 8126
> > unix 3 [ ] STREAM CONNECTED 8125
> > unix 3 [ ] STREAM CONNECTED 8124
> > unix 3 [ ] STREAM CONNECTED 8123
> > unix 3 [ ] STREAM CONNECTED 8122
> > unix 3 [ ] STREAM CONNECTED 7288
> > unix 3 [ ] STREAM CONNECTED 7287
> > unix 3 [ ] STREAM CONNECTED 7284
> > unix 3 [ ] STREAM CONNECTED 7283
> > unix 3 [ ] STREAM CONNECTED 7280
> > unix 3 [ ] STREAM CONNECTED 7279
> > unix 3 [ ] STREAM CONNECTED 7276
> > unix 3 [ ] STREAM CONNECTED 7275
> > unix 3 [ ] STREAM CONNECTED 7272
> > unix 3 [ ] STREAM CONNECTED 7271
> > unix 2 [ ] DGRAM 6954
> > unix 2 [ ] DGRAM 6445
> > unix 2 [ ] DGRAM 5567
> >
> >
> >
> > Dmesg show
> >
> > Built 1 zonelists. Total pages: 3194879
> > Kernel command line: ro root=/dev/main/root
> > mapped APIC to ffffd000 (fee00000)
> > mapped IOAPIC to ffffc000 (fec00000)
> > Enabling fast FPU save and restore... done.
> > Enabling unmasked SIMD FPU exception support... done.
> > Initializing CPU#0
> > CPU 0 irqstacks, hard=c0772000 soft=c0752000
> > PID hash table entries: 4096 (order: 12, 16384 bytes)
> > Console: colour VGA+ 80x25
> > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> > Memory: 12438128k/12779516k available (2204k kernel code, 108852k reserved,
> > 917k data, 232k init, 11630796k highmem)
> > Checking if this processor honours the WP bit even in supervisor mode... Ok.
> > hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0, 0, 0, 0, 0, 0
> > hpet0: 8 64-bit timers, 14318180 Hz
> > Using HPET for base-timer
> > Calibrating delay loop (skipped), value calculated using timer frequency..
> > 6585.55 BogoMIPS (lpj=3292777)
> > Security Framework v1.0.0 initialized
> > SELinux: Initializing.
> > SELinux: Starting in permissive mode
> > selinux_register_security: Registering secondary module capability
> > Capability LSM initialized as secondary
> > Mount-cache hash table entries: 512
> > CPU: After generic identify, caps: bfebfbff 28100000 00000000 02010000
> > 17bae3ff 00000000 00000001
> > CPU: After vendor identify, caps: bfebfbff 28100000 00000000 02010000
> > 17bae3ff 00000000 00000001
> > monitor/mwait feature present.
> > using mwait in idle threads.
> > CPU: L1 I cache: 32K, L1 D cache: 32K
> > CPU: L2 cache: 256K
> > CPU: L3 cache: 8192K
> > CPU: Physical Processor ID: 0
> > CPU: Processor Core ID: 0
> > CPU: After all inits, caps: bfebfbff 28100000 00000000 13010940 17bae3ff
> > 00000000 00000001
> > Intel machine check architecture supported.
> > Intel machine check reporting enabled on CPU#0.
> > Checking 'hlt' instruction... OK.
> > SMP alternatives: switching to UP code
> > ACPI: Core revision 20060707
> > CPU0: Intel(R) Xeon(R) CPU E31240 @ 3.30GHz stepping 07
> > SMP alternatives: switching to SMP code
> > Booting processor 1/1 eip 11000
> > CPU 1 irqstacks, hard=c0773000 soft=c0753000
> > Initializing CPU#1
> > Calibrating delay using timer specific routine.. 6584.97 BogoMIPS
> > (lpj=3292486)
> > CPU: After generic identify, caps: bfebfbff 28100000 00000000 02010000
> > 17bae3ff 00000000 00000001
> > CPU: After vendor identify, caps: bfebfbff 28100000 00000000 02010000
> > 17bae3ff 00000000 00000001
> > monitor/mwait feature present.
> > CPU: L1 I cache: 32K, L1 D cache: 32K
> > CPU: L2 cache: 256K
> > CPU: L3 cache: 8192K
> > CPU: Physical Processor ID: 0
> > CPU: Processor Core ID: 0
> > CPU: After all inits, caps: bfebfbff 28100000 00000000 13010940 17bae3ff
> > 00000000 00000001
> > Intel machine check architecture supported.
> > Intel machine check reporting enabled on CPU#1.
> > CPU1: Intel(R) Xeon(R) CPU E31240 @ 3.30GHz stepping 07
> > SMP alternatives: switching to SMP code
> > Booting processor 2/2 eip 11000
> > CPU 2 irqstacks, hard=c0774000 soft=c0754000
> > Initializing CPU#2
> > Calibrating delay using timer specific routine.. 6585.01 BogoMIPS
> > (lpj=3292505)
> > CPU: After generic identify, caps: bfebfbff 28100000 00000000 02010000
> > 17bae3ff 00000000 00000001
> > CPU: After vendor identify, caps: bfebfbff 28100000 00000000 02010000
> > 17bae3ff 00000000 00000001
> > monitor/mwait feature present.
> > CPU: L1 I cache: 32K, L1 D cache: 32K
> > CPU: L2 cache: 256K
> > CPU: L3 cache: 8192K
> > CPU: Physical Processor ID: 0
> > CPU: Processor Core ID: 1
> > CPU: After all inits, caps: bfebfbff 28100000 00000000 13010940 17bae3ff
> > 00000000 00000001
> > Intel machine check architecture supported.
> > Intel machine check reporting enabled on CPU#2.
> > CPU2: Intel(R) Xeon(R) CPU E31240 @ 3.30GHz stepping 07
> > SMP alternatives: switching to SMP code
> > Booting processor 3/3 eip 11000
> > CPU 3 irqstacks, hard=c0775000 soft=c0755000
> > Initializing CPU#3
> > Calibrating delay using timer specific routine.. 6584.99 BogoMIPS
> > (lpj=3292496)
> > CPU: After generic identify, caps: bfebfbff 28100000 00000000 02010000
> > 17bae3ff 00000000 00000001
> > CPU: After vendor identify, caps: bfebfbff 28100000 00000000 02010000
> > 17bae3ff 00000000 00000001
> > monitor/mwait feature present.
> > CPU: L1 I cache: 32K, L1 D cache: 32K
> > CPU: L2 cache: 256K
> > CPU: L3 cache: 8192K
> > CPU: Physical Processor ID: 0
> > CPU: Processor Core ID: 1
> > CPU: After all inits, caps: bfebfbff 28100000 00000000 13010940 17bae3ff
> > 00000000 00000001
> > Intel machine check architecture supported.
> > Intel machine check reporting enabled on CPU#3.
> > CPU3: Intel(R) Xeon(R) CPU E31240 @ 3.30GHz stepping 07
> > SMP alternatives: switching to SMP code
> > Booting processor 4/4 eip 11000
> > CPU 4 irqstacks, hard=c0776000 soft=c0756000
> > Initializing CPU#4
> > Calibrating delay using timer specific routine.. 6585.01 BogoMIPS
> > (lpj=3292509)
> > CPU: After generic identify, caps: bfebfbff 28100000 00000000 02010000
> > 17bae3ff 00000000 00000001
> > CPU: After vendor identify, caps: bfebfbff 28100000 00000000 02010000
> > 17bae3ff 00000000 00000001
> > monitor/mwait feature present.
> > CPU: L1 I cache: 32K, L1 D cache: 32K
> > CPU: L2 cache: 256K
> > CPU: L3 cache: 8192K
> > CPU: Physical Processor ID: 0
> > CPU: Processor Core ID: 2
> > CPU: After all inits, caps: bfebfbff 28100000 00000000 13010940 17bae3ff
> > 00000000 00000001
> > Intel machine check architecture supported.
> > Intel machine check reporting enabled on CPU#4.
> > CPU4: Intel(R) Xeon(R) CPU E31240 @ 3.30GHz stepping 07
> > SMP alternatives: switching to SMP code
> > Booting processor 5/5 eip 11000
> > CPU 5 irqstacks, hard=c0777000 soft=c0757000
> > Initializing CPU#5
> > Calibrating delay using timer specific routine.. 6584.99 BogoMIPS
> > (lpj=3292498)
> > CPU: After generic identify, caps: bfebfbff 28100000 00000000 02010000
> > 17bae3ff 00000000 00000001
> > CPU: After vendor identify, caps: bfebfbff 28100000 00000000 02010000
> > 17bae3ff 00000000 00000001
> > monitor/mwait feature present.
> > CPU: L1 I cache: 32K, L1 D cache: 32K
> > CPU: L2 cache: 256K
> > CPU: L3 cache: 8192K
> > CPU: Physical Processor ID: 0
> > CPU: Processor Core ID: 2
> > CPU: After all inits, caps: bfebfbff 28100000 00000000 13010940 17bae3ff
> > 00000000 00000001
> > Intel machine check architecture supported.
> > Intel machine check reporting enabled on CPU#5.
> > CPU5: Intel(R) Xeon(R) CPU E31240 @ 3.30GHz stepping 07
> > SMP alternatives: switching to SMP code
> > Booting processor 6/6 eip 11000
> > CPU 6 irqstacks, hard=c0778000 soft=c0758000
> > Initializing CPU#6
> > Calibrating delay using timer specific routine.. 6585.00 BogoMIPS
> > (lpj=3292502)
> > CPU: After generic identify, caps: bfebfbff 28100000 00000000 02010000
> > 17bae3ff 00000000 00000001
> > CPU: After vendor identify, caps: bfebfbff 28100000 00000000 02010000
> > 17bae3ff 00000000 00000001
> > monitor/mwait feature present.
> > CPU: L1 I cache: 32K, L1 D cache: 32K
> > CPU: L2 cache: 256K
> > CPU: L3 cache: 8192K
> > CPU: Physical Processor ID: 0
> > CPU: Processor Core ID: 3
> > CPU: After all inits, caps: bfebfbff 28100000 00000000 13010940 17bae3ff
> > 00000000 00000001
> > Intel machine check architecture supported.
> > Intel machine check reporting enabled on CPU#6.
> > CPU6: Intel(R) Xeon(R) CPU E31240 @ 3.30GHz stepping 07
> > SMP alternatives: switching to SMP code
> > Booting processor 7/7 eip 11000
> > CPU 7 irqstacks, hard=c0779000 soft=c0759000
> > Initializing CPU#7
> > Calibrating delay using timer specific routine.. 6584.99 BogoMIPS
> > (lpj=3292499)
> > CPU: After generic identify, caps: bfebfbff 28100000 00000000 02010000
> > 17bae3ff 00000000 00000001
> > CPU: After vendor identify, caps: bfebfbff 28100000 00000000 02010000
> > 17bae3ff 00000000 00000001
> > monitor/mwait feature present.
> > CPU: L1 I cache: 32K, L1 D cache: 32K
> > CPU: L2 cache: 256K
> > CPU: L3 cache: 8192K
> > CPU: Physical Processor ID: 0
> > CPU: Processor Core ID: 3
> > CPU: After all inits, caps: bfebfbff 28100000 00000000 13010940 17bae3ff
> > 00000000 00000001
> > Intel machine check architecture supported.
> > Intel machine check reporting enabled on CPU#7.
> > CPU7: Intel(R) Xeon(R) CPU E31240 @ 3.30GHz stepping 07
> > Total of 8 processors activated (52680.54 BogoMIPS).
> > ENABLING IO-APIC IRQs
> > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> > Using local APIC timer interrupts.
> > checking TSC synchronization across 8 CPUs: passed.
> > Brought up 8 CPUs
> > sizeof(vma)=88 bytes
> > sizeof(page)=32 bytes
> > sizeof(inode)=340 bytes
> > sizeof(dentry)=136 bytes
> > sizeof(ext3inode)=492 bytes
> > sizeof(buffer_head)=52 bytes
> > sizeof(skbuff)=176 bytes
> > migration_cost=90,124
> > checking if image is initramfs... it is
> > Freeing initrd memory: 3340k freed
> > NET: Registered protocol family 16
> > ACPI: bus type pci registered
> > PCI: Using MMCONFIG
> > Setting up standard PCI resources
> > ACPI: Interpreter enabled
> > ACPI: Using IOAPIC for interrupt routing
> > ACPI: No dock devices found.
> > ACPI: PCI Root Bridge [PCI0] (0000:00)
> > PCI: Transparent bridge - 0000:00:1e.0
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT1._PRT]
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT5._PRT]
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT6._PRT]
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT7._PRT]
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT8._PRT]
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT]
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT05._PRT]
> > ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11)
> > ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 *10 11)
> > ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled.
> > ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11)
> > ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *7 10 11)
> > ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
> > ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled.
> > ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled.
> > Linux Plug and Play Support v0.97 (c) Adam Belay
> > pnp: PnP ACPI init
> > pnp: PnP ACPI: found 11 devices
> > usbcore: registered new driver usbfs
> > usbcore: registered new driver hub
> > PCI: Using ACPI for IRQ routing
> > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> > report
> > NetLabel: Initializing
> > NetLabel: domain hash size = 128
> > NetLabel: protocols = UNLABELED CIPSOv4
> > NetLabel: unlabeled traffic allowed by default
> > pnp: 00:01: ioport range 0x408-0x40f has been reserved
> > pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
> > pnp: 00:01: ioport range 0x310-0x313 has been reserved
> > pnp: 00:01: iomem range 0xf4000000-0xf7ffffff has been reserved
> > pnp: 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
> > pnp: 00:01: iomem range 0xfed90000-0xfed91fff has been reserved
> > PCI: Bridge: 0000:00:01.0
> > IO window: disabled.
> > MEM window: disabled.
> > PREFETCH window: disabled.
> > PCI: Bridge: 0000:00:06.0
> > IO window: disabled.
> > MEM window: disabled.
> > PREFETCH window: disabled.
> > PCI: Bridge: 0000:00:1c.0
> > IO window: disabled.
> > MEM window: disabled.
> > PREFETCH window: disabled.
> > PCI: Bridge: 0000:00:1c.4
> > IO window: 4000-0000
> > MEM window: fbe00000-00000000
> > PREFETCH window: disabled.
> > PCI: Bridge: 0000:00:1c.5
> > IO window: 5000-0000
> > MEM window: fbf00000-00000000
> > PREFETCH window: disabled.
> > PCI: Bridge: 0000:00:1c.6
> > IO window: disabled.
> > MEM window: disabled.
> > PREFETCH window: disabled.
> > PCI: Bridge: 0000:00:1c.7
> > IO window: 2000-0000
> > MEM window: fad00000-00000000
> > PREFETCH window 0x00000000f9000000-0x00000000f9ffffff
> > PCI: Bridge: 0000:00:1e.0
> > IO window: disabled.
> > MEM window: disabled.
> > PREFETCH window: disabled.
> > ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
> > PCI: Setting latency timer of device 0000:00:01.0 to 64
> > ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
> > PCI: Setting latency timer of device 0000:00:06.0 to 64
> > ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
> > PCI: Setting latency timer of device 0000:00:1c.0 to 64
> > ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
> > PCI: Setting latency timer of device 0000:00:1c.4 to 64
> > ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177
> > PCI: Setting latency timer of device 0000:00:1c.5 to 64
> > ACPI: PCI Interrupt 0000:00:1c.6[C] -> GSI 18 (level, low) -> IRQ 185
> > PCI: Setting latency timer of device 0000:00:1c.6 to 64
> > ACPI: PCI Interrupt 0000:00:1c.7[D] -> GSI 19 (level, low) -> IRQ 193
> > PCI: Setting latency timer of device 0000:00:1c.7 to 64
> > PCI: Setting latency timer of device 0000:00:1e.0 to 64
> > NET: Registered protocol family 2
> > IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> > TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> > TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> > TCP: Hash tables configured (established 131072 bind 65536)
> > TCP reno registered
> > apm: BIOS not found.
> > audit: initializing netlink socket (disabled)
> > type=2000 audit(1371636950.384:1): initialized
> > highmem bounce pool size: 64 pages
> > Total HugeTLB memory allocated, 0
> > VFS: Disk quotas dquot_6.5.1
> > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> > SELinux: Registering netfilter hooks
> > Initializing Cryptographic API
> > alg: No test for crc32c (crc32c-generic)
> > ksign: Installing public key data
> > Loading keyring
> > - Added public key 83BC8EDE34A2C073
> > - User ID: CentOS (Kernel Module GPG key)
> > io scheduler noop registered
> > io scheduler anticipatory registered
> > io scheduler deadline registered
> > io scheduler cfq registered (default)
> > Boot video device is 0000:01:00.1
> > PCI: Setting latency timer of device 0000:00:01.0 to 64
> > PCI: Setting latency timer of device 0000:00:06.0 to 64
> > PCI: Setting latency timer of device 0000:00:1c.0 to 64
> > PCI: Setting latency timer of device 0000:00:1c.4 to 64
> > PCI: Setting latency timer of device 0000:00:1c.5 to 64
> > PCI: Setting latency timer of device 0000:00:1c.6 to 64
> > PCI: Setting latency timer of device 0000:00:1c.7 to 64
> > pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> > Monitor-Mwait will be used to enter C-1 state
> > Monitor-Mwait will be used to enter C-2 state
> > Monitor-Mwait will be used to enter C-3 state
> > ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> > ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
> > ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
> > ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
> > ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3])
> > ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3])
> > ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3])
> > ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3])
> > ACPI: Thermal Zone [THM0] (8 C)
> > Real Time Clock Driver v1.12ac
> > hpet_resources: 0xfed00000 is busy
> > Non-volatile memory driver v1.2
> > Linux agpgart interface v0.101 (c) Dave Jones
> > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> > 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> > brd: module loaded
> > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> > Probing IDE interface ide0...
> > Probing IDE interface ide1...
> > ide-floppy driver 0.99.newide
> > usbcore: registered new driver hiddev
> > usbcore: registered new driver usbhid
> > drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> > PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
> > serio: i8042 KBD port at 0x60,0x64 irq 1
> > serio: i8042 AUX port at 0x60,0x64 irq 12
> > mice: PS/2 mouse device common for all mice
> > md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
> > md: bitmap version 4.39
> > TCP bic registered
> > Initializing IPsec netlink socket
> > NET: Registered protocol family 1
> > NET: Registered protocol family 17
> > Using IPI No-Shortcut mode
> > ACPI: (supports S0 S4 S5)
> > Time: tsc clocksource has been installed.
> > Initalizing network drop monitor service
> > Freeing unused kernel memory: 232k freed
> > Write protecting the kernel read-only data: 416k
> > input: AT Translated Set 2 keyboard as /class/input/input0
> > ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 21 (level, low) -> IRQ 74
> > PCI: Setting latency timer of device 0000:00:1a.0 to 64
> > ehci_hcd 0000:00:1a.0: EHCI Host Controller
> > ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
> > ehci_hcd 0000:00:1a.0: debug port 2
> > PCI: cache line size of 32 is not supported by device 0000:00:1a.0
> > ehci_hcd 0000:00:1a.0: irq 74, io mem 0xfacc0000
> > ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> > usb usb1: configuration #1 chosen from 1 choice
> > hub 1-0:1.0: USB hub found
> > hub 1-0:1.0: 2 ports detected
> > ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 82
> > PCI: Setting latency timer of device 0000:00:1d.0 to 64
> > ehci_hcd 0000:00:1d.0: EHCI Host Controller
> > ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> > ehci_hcd 0000:00:1d.0: debug port 2
> > PCI: cache line size of 32 is not supported by device 0000:00:1d.0
> > ehci_hcd 0000:00:1d.0: irq 82, io mem 0xfacb0000
> > ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> > usb usb2: configuration #1 chosen from 1 choice
> > hub 2-0:1.0: USB hub found
> > hub 2-0:1.0: 2 ports detected
> > ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
> > USB Universal Host Controller Interface driver v3.0
> > ACPI: PCI Interrupt 0000:01:00.4[B] -> GSI 16 (level, low) -> IRQ 169
> > PCI: Setting latency timer of device 0000:01:00.4 to 64
> > uhci_hcd 0000:01:00.4: UHCI Host Controller
> > uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3
> > uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
> > uhci_hcd 0000:01:00.4: irq 169, io base 0x00002000
> > usb usb3: configuration #1 chosen from 1 choice
> > hub 3-0:1.0: USB hub found
> > hub 3-0:1.0: 2 ports detected
> > usb 1-1: new high speed USB device using ehci_hcd and address 2
> > SCSI subsystem initialized
> > libata version 3.00 loaded.
> > ata_piix 0000:00:1f.2: version 2.12
> > ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 177
> > ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
> > PCI: Setting latency timer of device 0000:00:1f.2 to 64
> > scsi0 : ata_piix
> > scsi1 : ata_piix
> > ata1: SATA max UDMA/133 cmd 0x1400 ctl 0x1408 bmdma 0x1420 irq 177
> > ata2: SATA max UDMA/133 cmd 0x1410 ctl 0x1418 bmdma 0x1428 irq 177
> > usb 1-1: configuration #1 chosen from 1 choice
> > hub 1-1:1.0: USB hub found
> > hub 1-1:1.0: 6 ports detected
> > usb 2-1: new high speed USB device using ehci_hcd and address 2
> > usb 2-1: configuration #1 chosen from 1 choice
> > hub 2-1:1.0: USB hub found
> > hub 2-1:1.0: 6 ports detected
> > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > ata1.00: ATA-8: Hitachi HUA722010CLA330, JP4OA3MA, max UDMA/133
> > ata1.00: 1953525168 sectors, multi 8: LBA48 NCQ (depth 0/32)
> > ata1.00: configured for UDMA/133
> > usb 3-1: new full speed USB device using uhci_hcd and address 2
> > ata2: SATA link down (SStatus 0 SControl 300)
> > Vendor: ATA Model: Hitachi HUA72201 Rev: JP4O
> > Type: Direct-Access ANSI SCSI revision: 05
> > SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB)
> > sda: Write Protect is off
> > sda: Mode Sense: 00 3a 00 00
> > SCSI device sda: drive cache: write through
> > SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB)
> > sda: Write Protect is off
> > sda: Mode Sense: 00 3a 00 00
> > SCSI device sda: drive cache: write through
> > sda: sda1 sda2
> > sd 0:0:0:0: Attached scsi disk sda
> > ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 177
> > ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
> > PCI: Setting latency timer of device 0000:00:1f.5 to 64
> > scsi2 : ata_piix
> > scsi3 : ata_piix
> > ata3: SATA max UDMA/133 cmd 0x1440 ctl 0x1448 bmdma 0x1460 irq 177
> > ata4: SATA max UDMA/133 cmd 0x1450 ctl 0x1458 bmdma 0x1468 irq 177
> > usb 3-1: configuration #1 chosen from 1 choice
> > input: HP Virtual Keyboard as /class/input/input1
> > input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard ] on
> > usb-0000:01:00.4-1
> > input: HP Virtual Keyboard as /class/input/input2
> > input,hidraw0: USB HID v1.01 Mouse [HP Virtual Keyboard ] on
> > usb-0000:01:00.4-1
> > usb 1-1.6: new low speed USB device using ehci_hcd and address 3
> > ata3: SATA link down (SStatus 0 SControl 300)
> > usb 1-1.6: configuration #1 chosen from 1 choice
> > input: CHICONY HP Basic USB Keyboard as /class/input/input3
> > input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on
> > usb-0000:00:1a.0-1.6
> > ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> > ata4.00: ATAPI: hp DVD-RAM GH80N, RS03, max UDMA/100
> > ata4.00: configured for UDMA/100
> > Vendor: hp Model: DVD-RAM GH80N Rev: RS03
> > Type: CD-ROM ANSI SCSI revision: 05
> > device-mapper: uevent: version 1.0.3
> > device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised:
> > dm-de...@redhat.com
> > device-mapper: dm-raid45: initialized v0.2594l
> > kjournald starting. Commit interval 5 seconds
> > EXT3-fs: mounted filesystem with ordered data mode.
> > input: PC Speaker as /class/input/input4
> > e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k
> > e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
> > e1000e 0000:02:00.0: Disabling ASPM L0s
> > ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
> > PCI: Setting latency timer of device 0000:02:00.0 to 64
> > Floppy drive(s): fd0 is 1.44M
> > e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:9c:02:aa:4a:04
> > e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
> > e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
> > e1000e 0000:03:00.0: Disabling ASPM L0s
> > ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 177
> > PCI: Setting latency timer of device 0000:03:00.0 to 64
> > e1000e 0000:03:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:9c:02:aa:4a:05
> > e1000e 0000:03:00.0: eth1: Intel(R) PRO/1000 Network Connection
> > e1000e 0000:03:00.0: eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
> > ACPI: PCI Interrupt 0000:01:00.2[B] -> GSI 16 (level, low) -> IRQ 169
> > PCI: Setting latency timer of device 0000:01:00.2 to 64
> > sd 0:0:0:0: Attached scsi generic sg0 type 0
> > scsi 3:0:0:0: Attached scsi generic sg1 type 5
> > sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
> > Uniform CD-ROM driver Revision: 3.20
> > sr 3:0:0:0: Attached scsi CD-ROM sr0
> > floppy0: no floppy controllers found
> > work still pending
> > Floppy drive(s): fd0 is 1.44M
> > floppy0: no floppy controllers found
> > work still pending
> > lp: driver loaded but no devices found
> > ACPI: Power Button (FF) [PWRF]
> > ACPI: Mapper loaded
> > dell-wmi: No known WMI GUID found
> > md: Autodetecting RAID arrays.
> > md: autorun ...
> > md: ... autorun DONE.
> > device-mapper: multipath: version 1.0.6 loaded
> > EXT3 FS on dm-0, internal journal
> > kjournald starting. Commit interval 5 seconds
> > EXT3 FS on sda1, internal journal
> > EXT3-fs: mounted filesystem with ordered data mode.
> > Adding 5668856k swap on /dev/main/swap. Priority:-1 extents:1
> > across:5668856k
> > IA-32 Microcode Update Driver: v1.14a <tig...@veritas.com>
> > ip_tables: (C) 2000-2006 Netfilter Core Team
> > Netfilter messages via NETLINK v0.30.
> > ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
> > NET: Registered protocol family 10
> > lo: Disabled Privacy Extensions
> > IPv6 over IPv4 tunneling driver
> > sit0: Disabled Privacy Extensions
> > Ethernet Channel Bonding Driver: v3.4.0-1 (October 7, 2008)
> > bonding: MII link monitoring set to 200 ms
> > ADDRCONF(NETDEV_UP): eth0: link is not ready
> > e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
> > e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO
> > ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> > eth0: no IPv6 routers present
> > -bash-3.2$
> >
> >
> > What shoud we do to solve this proble?
> >
> > Somsak
> >
> --
> users@sogo.nu
> https://inverse.ca/sogo/lists
--
Somsak
Ps. Sogo 2.0.4b
SME Server 8.0
--
users@sogo.nu
https://inverse.ca/sogo/lists
