I give up -- I have upgrade to Apache 2.2 and I am using mod_proxy_ajp.  Works 
great so far --any risks?

Greg Bobak <[EMAIL PROTECTED]> wrote: Found some info that indicates that a 
perl script is looking for strict.pm.  It is on my system.  Ihave even copied 
it to a path that is indicated in the error below:

bash-2.05# find / -name strict.pm
/usr/perl5/5.6.1/lib/strict.pm
/usr/perl5/5.00503/strict.pm
/usr/local/lib/perl5/5.6.1/lib/strict.pm
/usr/local/lib/perl5/5.6.1/strict.pm  <---- LISTED IN ERRORS


Greg Bobak  wrote: Still trying to bind mod_jk statically to httpd.

I found that I had to install the whole libtool package. 

Do the following errors mean that I must buiild from the CVS source only?

bash-2.05# ./buildconf
rebuilding srclib/apr/configure
buildconf: checking installation...
buildconf: autoconf version 2.59 (ok)
buildconf: libtool version 1.5 (ok)
Copying libtool helper files ...
buildconf: Using libtool.m4 at /usr/local/share/aclocal/libtool.m4.
Creating include/arch/unix/apr_private.h.in ...
Can't locate strict.pm in @INC (@INC contains: /usr/local/share/autoconf 
/usr/local/lib/perl5/5.6.1/sun4-solaris /usr/local/lib/perl5/5.6.1 
/usr/local/lib/perl5/site_perl/5.6.1/sun4-solaris 
/usr/local/lib/perl5/site_perl/5.6.1 /usr/local/lib/perl5/site_perl .) at 
/usr/local/share/autoconf/Autom4te/Channels.pm line 60.
BEGIN failed--compilation aborted at 
/usr/local/share/autoconf/Autom4te/Channels.pm line 60.
Compilation failed in require at 
/usr/local/share/autoconf/Autom4te/ChannelDefs.pm line 20.
BEGIN failed--compilation aborted at 
/usr/local/share/autoconf/Autom4te/ChannelDefs.pm line 20.
Compilation failed in require at /usr/local/bin/autoheader line 42.
BEGIN failed--compilation aborted at /usr/local/bin/autoheader line 42.
Creating configure ...
Can't locate Data/Dumper.pm in @INC (@INC contains: /usr/local/share/autoconf 
/usr/local/lib/perl5/5.6.1/sun4-solaris /usr/local/lib/perl5/5.6.1 
/usr/local/lib/perl5/site_perl/5.6.1/sun4-solaris 
/usr/local/lib/perl5/site_perl/5.6.1 /usr/local/lib/perl5/site_perl .) at 
/usr/local/share/autoconf/Autom4te/C4che.pm line 35.
BEGIN failed--compilation aborted at 
/usr/local/share/autoconf/Autom4te/C4che.pm line 35.
Compilation failed in require at /usr/local/bin/autom4te line 39.
BEGIN failed--compilation aborted at /usr/local/bin/autom4te line 39.
rebuilding rpm spec file
rebuilding srclib/apr-util/configure

Looking for apr source in ../apr
Creating include/private/apu_config.h ...
Can't locate strict.pm in @INC (@INC contains: /usr/local/share/autoconf 
/usr/local/lib/perl5/5.6.1/sun4-solaris /usr/local/lib/perl5/5.6.1 
/usr/local/lib/perl5/site_perl/5.6.1/sun4-solaris 
/usr/local/lib/perl5/site_perl/5.6.1 /usr/local/lib/perl5/site_perl .) at 
/usr/local/share/autoconf/Autom4te/Channels.pm line 60.
BEGIN failed--compilation aborted at 
/usr/local/share/autoconf/Autom4te/Channels.pm line 60.
Compilation failed in require at 
/usr/local/share/autoconf/Autom4te/ChannelDefs.pm line 20.
BEGIN failed--compilation aborted at 
/usr/local/share/autoconf/Autom4te/ChannelDefs.pm line 20.
Compilation failed in require at /usr/local/bin/autoheader line 42.
BEGIN failed--compilation aborted at /usr/local/bin/autoheader line 42.
Creating configure ...
Can't locate Data/Dumper.pm in @INC (@INC contains: /usr/local/share/autoconf 
/usr/local/lib/perl5/5.6.1/sun4-solaris /usr/local/lib/perl5/5.6.1 
/usr/local/lib/perl5/site_perl/5.6.1/sun4-solaris 
/usr/local/lib/perl5/site_perl/5.6.1 /usr/local/lib/perl5/site_perl .) at 
/usr/local/share/autoconf/Autom4te/C4che.pm line 35.
BEGIN failed--compilation aborted at 
/usr/local/share/autoconf/Autom4te/C4che.pm line 35.
Compilation failed in require at /usr/local/bin/autom4te line 39.
BEGIN failed--compilation aborted at /usr/local/bin/autom4te line 39.
autoconf failed
./buildconf failed for apr-util

Peace,
G.

Greg Bobak  wrote: Found autoconf (did not realize it was a Unix utility):

http://www.sunfreeware.com/programlistsparc9.html#autoconf

Greg Bobak  wrote: I've found documentation for building mod_jk as a static 
module in apache here:

http://tomcat.apache.org/connectors-doc/howto/apache.html (at the bottom of 
page).

On this step, I get this:

bash-2.05# ./buildconf
rebuilding srclib/apr/configure
buildconf: checking installation...
build/buildcheck.sh: autoconf: not found
buildconf: autoconf not found.
           You need autoconf version 2.13 or newer installed
           to build Apache from CVS.
./buildconf failed for apr

I cannot find autoconf version 2.13 anywhere.  Could someone please tell me 
where to get autoconf?

Assuming the build goes correctly, do I implement a static mod_jk any 
differently than a dynamic mod_jk

Thanks,
G

Greg Bobak  wrote: Hi,

Thansk for the reply.  I think I had found some documentation about rebuild 
Apache with mod_jk bound.  I'll have to look again.  

I've been trying to rebuild mod_jk (to no avail) in  hopes that would work, but 
keep getting this error: 

could not find /usr/local/apache2/bin/apxs
configure: error: You must specify a valid --with-apxs path

Of course it is the right path.

G.

Mike Sabroff  wrote: I had the same problem a while back. I had to do some 
googling and find 
the mod_jk source. Trying to compile it was problematic and I also got 
the unresolved errors I had to rebuild apache with jk as part of the 
build in order to get it to work.

I wish I could remember where I got the source and the instructions, but 
I am old and forget easily (actually age has nothing to do with 
it....always been like that)
I appologize, especially since I spent many hours trying this and that 
and I know what you are going through
I do remember, that the proceedure was different with apache 2.x than it 
was with 1.3x that I have installed.


Greg Bobak wrote:
>
> I am using Tomcat 5.0.28 BTW.
>
> G.
>
> Greg Bobak  wrote:  I am trying to get mod_jk to 
> work with apache 2.0.55 and get this error on the load module:
>
> Syntax error on line 276 of /usr/local/apache2/conf/httpd.conf:
> Cannot load /usr/local/apache2/modules/mod_jk.so into server: ld.so.1: 
> /usr/local/apache2/bin/httpd: fatal: relocation error: file 
> /usr/local/apache2/modules/mod_jk.so: symbol ap_null_cleanup: 
> referenced symbol not found
>
>
> I have looked everywhere, and have been advised to recompile apache, 
> which I have done successfully a few times.  This is how I have 
> recompiled:
>
> ./configure --prefix=/usr/local/apache2 --enable-mods-shared=all 
> --enable-ssl=shared --enable-ssl --with-ssl=/usr/local/ssl 
> --enable-proxy --enable-proxy-connect --enable-proxy-ftp 
> --enable-proxy-http --enable-so --enable-rule="SHARED_CORE"
>
> make
>
> make install
>
> I use "make clean" between attempts..Ihave tried withou the 
> "SHARED_CORE" and without the --enable-so because 
> --enable-mods-shared=all should cover that.  Still no luck.
>
> I am using Solaris 9.  Here is some diag info:
>
> [EMAIL PROTECTED]:/usr/local/apache2/bin # ldd -d  
> /usr/local/apache2/modules/mod_jk.so
>         libc.so.1 =>     /usr/lib/libc.so.1
>         libdl.so.1 =>    /usr/lib/libdl.so.1
>         symbol not found: ap_server_root                
> (/usr/local/apache2/modules/mod_jk.so)
>         symbol not found: ap_null_cleanup               
> (/usr/local/apache2/modules/mod_jk.so)
>         symbol not found: dir_module            
> (/usr/local/apache2/modules/mod_jk.so)
>         /usr/platform/SUNW,Serverblade1/lib/libc_psr.so.1
>
> [EMAIL PROTECTED]:/usr/local/apache2/bin # httpd -V
> Server version: Apache/2.0.55
> Server built:   Jan 23 2006 13:17:34
> Server's Module Magic Number: 20020903:11
> Architecture:   32-bit
> Server compiled with....
>  -D APACHE_MPM_DIR="server/mpm/prefork"
>  -D APR_HAS_SENDFILE
>  -D APR_HAS_MMAP
>  -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled)
>  -D APR_USE_FCNTL_SERIALIZE
>  -D APR_USE_PTHREAD_SERIALIZE
>  -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT
>  -D APR_HAS_OTHER_CHILD
>  -D AP_HAVE_RELIABLE_PIPED_LOGS
>  -D HTTPD_ROOT="/usr/local/apache2"
>  -D SUEXEC_BIN="/usr/local/apache2/bin/suexec"
>  -D DEFAULT_PIDLOG="logs/httpd.pid"
>  -D DEFAULT_SCOREBOARD="logs/apache_runtime_status"
>  -D DEFAULT_LOCKFILE="logs/accept.lock"
>  -D DEFAULT_ERRORLOG="logs/error_log"
>  -D AP_TYPES_CONFIG_FILE="conf/mime.types"
>  -D SERVER_CONFIG_FILE="conf/httpd.conf"
>
> [EMAIL PROTECTED]:/usr/local/apache2/bin # httpd -v
> Server version: Apache/2.0.55
> Server built:   Jan 23 2006 13:17:34
>
>
> Please advise as to what info would be helpful in determining the root 
> cause.
>
> Thanks for your help,
> Greg
>
>
>
>
>
>  
> ---------------------------------
>
>  What are the most popular cars?  Find out at Yahoo! Autos
>
>
>                
> ---------------------------------
>
>  What are the most popular cars?  Find out at Yahoo! Autos
>

-- 
Mike Sabroff
Web Services Developer
[EMAIL PROTECTED]
920-568-8379


---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]




   
---------------------------------
Yahoo! Photos
 Got holiday prints? See all the ways to get quality prints in your hands ASAP.


  
---------------------------------
 Yahoo! Autos. Looking for a sweet ride? Get pricing, reviews, & more on new 
and used cars.


  
---------------------------------
 Yahoo! Autos. Looking for a sweet ride? Get pricing, reviews, & more on new 
and used cars.


  
---------------------------------
Yahoo! Photos � Showcase holiday pictures in hardcover
 Photo Books. You design it and we�ll bind it!


   
---------------------------------
Yahoo! Photos
 Got holiday prints? See all the ways to get quality prints in your hands ASAP.


                
---------------------------------
Yahoo! Photos – Showcase holiday pictures in hardcover
 Photo Books. You design it and we’ll bind it!

Reply via email to