Hello there, I'm a new user of traffic server. I have a server having network
interface like this
/sbin/ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:15:17:9E:F9:B8
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Base address:0x3020 Memory:b8820000-b8840000
eth1 Link encap:Ethernet HWaddr 00:15:17:9E:F9:B9
inet addr:10.161.29.89 Bcast:10.161.29.127 Mask:255.255.255.128
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:550248719 errors:0 dropped:0 overruns:0 frame:0
TX packets:909757737 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:323265851447 (308290.3 Mb) TX bytes:1169575972530
(1115394.5 Mb)
Base address:0x3000 Memory:b8800000-b8820000
I modified ../etc/trafficserver/records.config and add 2 lines
LOCAL proxy.local.incoming_ip_to_bind STRING 10.161.29.89
CONFIG proxy.config.cluster.ethernet_interface STRING eth1
after TS starts up, I notice it's listening on 4 port like this
netstat -tnlp | grep traff
tcp 0 0 10.161.29.89:8080 0.0.0.0:* LISTEN
31464/traffic_manag
tcp 0 0 0.0.0.0:8083 0.0.0.0:* LISTEN
31464/traffic_manag
tcp 0 0 10.161.29.89:8084 0.0.0.0:* LISTEN
31474/traffic_serve
tcp 0 0 0.0.0.0:8088 0.0.0.0:* LISTEN
31464/traffic_manag
For some reason I'd like TS not to listen on ip 0.0.0.0. How can I set traffic
manager to bind on specific ip (10.161.29.89:8083/8088) instead of 0.0.0.0 ?
