Hi Ram,Spdy source is not a part of ATS i think. But you can find it at 'https://github.com/tatsuhiro-t/spdylay'. git: 'https://github.com/tatsuhiro-t/spdylay.git'.After compile, you can find spdycat.Also, if you want to check whether spdy is enabled or not on a web site, and if you use chrome browser, you can use a chrome extension called 'SPDY indicator', enable that, when you browse a website, it will give you the information of spdy. Thanks & Best wishes, Yu, Zou From: Ram Chander <[email protected]> To: Sudheer Vinukonda <[email protected]>; "[email protected]" <[email protected]>; [email protected] Sent: Tuesday, January 27, 2015 6:22 PM Subject: Re: Spdy with Trafficserver Also spdycat is not found in bin path. How to check if spdy is enabled properly ?
Also request to give any configuration on any port that can work with spdy. thanks. On Tue, Jan 27, 2015 at 3:33 PM, Ram Chander <[email protected]> wrote: Basically I want my site to listen on 443 and use spdy by default. How to do this ? I check in chrome which has below spdy indicator installed -> https://mysite/index.html Also below config doesnt work. CONFIG proxy.config.http.server_ports STRING 80:ipv4 443:ipv4:proto=spdy:ssl https://chrome.google.com/webstore/detail/spdy-indicator/mpbpobfflnpcgagjijhmgnchggcjblin/related On Tue, Jan 27, 2015 at 3:17 PM, Sudheer Vinukonda <[email protected]> wrote: | Can you provide details on how you are checking that Spdy is not working correctly? Spdy is enabled by default on TLS ports (server ports configured with :ssl) - curious to note you have spdy enabled on port 443, but it is not configured as a TLS port. Is that intentional? Most browsers (including chrome and FF) do not allow spdy on non-TLS ports by default. So, if you really wanted to allow spdy on a non TLS port only, then you can test it with spdycat (should be installed along with your trafficserver build compiled with --enable-spdy option). Thanks, Sudheer At Jan 27, 2015, 1:36:05 AM, Ram Chander<'[email protected]'> wrote:Hi, I am facing issues with enabling spdy. I have compiled 5.1.0 with --enable-spdy but below configuration is not working Below is record.config to enable spdy. CONFIG proxy.config.http.server_ports STRING 80:ipv4 443:ipv4:proto=spdy Request for correct configuration to enable spdy. Thanks. Regards, Ram |
