Yes, Ezra, here is my 2-cents worth, my friend.

I continue to strongly insist on the fact that we should NOT as a matter of *policy* 
enforce a *specific* prefix on industries, *regardless*.

IMHO what we must do is present the SI system to prospect candidates for metrication 
in its *entirety*, the whole maguila.

Proper education is the key, and learning of what it means to write numbers as 90.0 
mm, or 55 cm.  Show them that the matter of publishing measured digits is a 
*scientific exercise* in instrument accuracy and requirement, for instance.

Teach them also that if certain measures are accurate only to the cm, for instance, 
that it would be wrong to add an additional digit to it just to make it an 
"engineering" number.

Conversely, also show to them that if things can be measured *accurately* to the typo 
accuracy, that it is NOT sufficient to state these values as 490 mm, for instance, but 
rather 490.3 mm (or, better yet, 4 903 tym!  :-)   ).

One of the strongest advantages of the SI system is its **flexibility** as reflected 
by a plethora of choices for prefixes.  Industries should work together to determine 
if it's in their best interest to choose and/or enforce a specific prefix on its 
stakeholders.  They should also consider that some players may NOT require more 
accuracy than others.  Therefore it would behoove them to be flexible and tolerant 
towards others, too, after all.

Anyways, as I said, my 2-cents worth, and as a summary, it's not a matter of cm versus 
mm, but *satisfying the needs of stakeholders*!

Take care, Ezra.

Marcus

On Sat, 15 Nov 2003 13:04:36  
 ezras wrote:
>Thanks for your thoughts on this topic, Mike. Same to Gene and the others.
>
>I realize that Pat Naughtin says he is reporting a pattern that he has observed in 
>Australia's conversion to the SI, namely, that industries and economic sectors that 
>used the milli submultiple of the meter instead of the centi submultiple for lengths 
>less than a meter succeeded in converting cleanly whereas those that chose to use the 
>centi submultiple did not.
>
>I am still struggling with how to properly interpret this observed pattern and more 
>importantly how to deduce the underlying dynamic to see how it can be used to guide 
>policy and suggestions in the continued conversion of the UK, Canada, and the US.
>
>Thoughts, anyone??
>
>Ezra
>
>


____________________________________________________________
Get 25MB of email storage with Lycos Mail Plus!
Sign up today -- http://www.mail.lycos.com/brandPage.shtml?pageId=plus 

Reply via email to