Every time I encoutered the kips it meant kpsi (1000 psi).
(I am not claiming that it may not mean what others wrote also.)
Stan Jakuba.

On Sat, Oct 1, 2011 at 10:22 PM, Bill Hooper <[email protected]> wrote:

> I think "kips" stands for "kilo-pounds".
> The fact that the kip, as well as the pound, is used for both force in some
> instances and for mass in others, is good reason to get rid of Ye Olde
> English units. Let's replace them with coherent SI units (which are also
> physically correct).
>
> Bill Hooper
> 70 kg body mass
> Fernandina Beach, Florida, USA
>
> =======================
> Mike Payne wrote:
>
>  *From: *Michael Payne <[email protected]>
> *Subject: **[USMA:51179] Another wierd unit*
> *Date: *2011 Oct 01 10:47:29 AM EDT
> *To: *"U.S. Metric Association" <[email protected]>
> *Reply-To: *[email protected]
>
> Found this while reading an article about an old and new bridge in Aspen
> Colorado.
>
>
> http://en.wikipedia.org/wiki/Maroon_Creek_Bridge#cite_note-Layne_Geoconstruction-8
>
> The abutments <http://en.wikipedia.org/wiki/Abutment> on either side of
> the gorge are supported by 72 8-inch (200 mm) 
> micropiles<http://en.wikipedia.org/wiki/Deep_foundation#Micropile>designed to 
> support 150
> kips <http://en.wikipedia.org/wiki/Kip_%28unit%29> each.
>
> Apparently In the United States, a *kip* is a 
> non-SI<http://en.wikipedia.org/wiki/International_System_of_Units>unit of
> force <http://en.wikipedia.org/wiki/Force> that equals 1,000 
> pounds-force<http://en.wikipedia.org/wiki/Pound-force>,
> used primarily by architects and engineers to measure engineering loads.
> Although uncommon, it is occasionally also considered a unit of 
> mass<http://en.wikipedia.org/wiki/Mass>,
> equal to 1,000 pounds <http://en.wikipedia.org/wiki/Pound_%28mass%29>,
> i.e. one half of a U.S. ton <http://en.wikipedia.org/wiki/Short_ton>. One
> use is as a unit of 
> deadweight<http://en.wikipedia.org/wiki/Deadweight_tonnage>to compute 
> shipping charges.
>
> 1 kip = 4448.2216 Newtons <http://en.wikipedia.org/wiki/Newton_%28unit%29>(N) 
> = 4.4482216 kilonewtons (kN).
>
>
> Mike Payne
>
>
>
>
>
>
>
>
>
>
>
>

Reply via email to