Yes, correct.
My host is 10.22.128.1 though, and the usrp (dest) is 10.22.128.3.
So from wireshark I read that last control packet as host->usrp?
These are the current routes:
connections:
- { srcblk: radio0, srcport: out_0, dstblk: ep0, dstport: in0}
- { srcblk: radio0, srcport: out_1, dstblk: _device_, dstport: _none_}
- { srcblk: radio1, srcport: out_0, dstblk: ep2, dstport: in0}
- { srcblk: radio1, srcport: out_1, dstblk: _device_, dstport: _none_}
- { srcblk: _device_, srcport: _none_, dstblk: radio0, dstport: in_0 }
- { srcblk: _device_, srcport: _none_, dstblk: radio0, dstport: in_1 }
- { srcblk: _device_, srcport: _none_, dstblk: radio1, dstport: in_0 }
- { srcblk: _device_, srcport: _none_, dstblk: radio1, dstport: in_1 }
# multiddc connections
- { srcblk: ep6, srcport: out0, dstblk: multiddc0, dstport: in_0 }
- { srcblk: multiddc0, srcport: out_0, dstblk: ep7, dstport: in0 }
Changing ep7 to ep6 doesn’t work either although I believe that should be valid
too.
From: Martin Braun <martin.br...@ettus.com>
Sent: Tuesday, 29 July 2025 09:46
Cc: usrp-users@lists.ettus.com
Subject: [USRP-users] Re: [EXTERNAL]Re: remote streaming starts, but stops
after a few packets received
On Mon, Jul 28, 2025 at 4:14 PM Kevin Williams <kevin.willi...@vastech.co.za
<mailto:kevin.willi...@vastech.co.za> > wrote:
Changing the destination EP to a new one, ep7, worked again.
>From the RFNoC 4 workshop slides I was under the impression blocks could start
>and end on the same SEP?
They can, and even should, but how are you doing remote streaming in this case?
Are you connecting radio -> DDC -> remote streamer?
--M
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
