Hi Martin, · Yes, the output on the erroneous device has been generated by running that command when i am logged into the device via SSH.
· I have checked the Ip configurations, which they are 192.168.0.3 for the good device, 192.168.0.4 for the erroneous, 192.168.0.10 for the host (which only have 1 because i plugged and unplugged the devices so they have been tested separately) and DHCP 192.168.0.255. · Also the subnet and subnet mask are configurated the same for all the network (ettus devices and host). I am going to check out the manual that you send to me via link and see if i have set up anything wrong. Also in my first tries to make the devices run, I have configured the set up as you remarked in the reply, but suddenly when all goes wrong I only have tested the devices with the RJ45 connection. I will try to let the configuration as you recommended, but when i did i had the same issue. Thank you so much for the quick reply.
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
