Send USRP-users mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of USRP-users digest..."
Today's Topics:
1. overflow on E100 over HDMI (Robyn Colopy)
----------------------------------------------------------------------
Message: 1
Date: Fri, 17 May 2013 17:33:22 -0700
From: Robyn Colopy <[email protected]>
To: [email protected]
Subject: [USRP-users] overflow on E100 over HDMI
Message-ID:
<capskyncob5oppeej+dzcmu1crvbqt9bwczvxg7zkv7ukegp...@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
Hi folks,
I got an E100 recently and since I'm pretty new at GNURadio I'm trying
to do some quick sanity checks using a monitor before switching to
ssh. Right now I just have a USRP Source going into a QT GUI Time
Sink. I've brought the FPGA clock down to 16M and the sampling to 31
kHz and I've tried a couple different settings on the GUI update rate.
Nothing seems to slow it down enough to prevent overflow.
I was hoping someone might be able to point me to some documentation
regarding the lowest achievable sampling rate, or if that's still not
slow enough, a hint on how to perform finite rx/tx instead of
continuous.
Thanks for your help!
Robyn
------------------------------
Subject: Digest Footer
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
------------------------------
End of USRP-users Digest, Vol 33, Issue 16
******************************************
