Hello - I have 2 USRPs (both E310/E312) which I want to sync up using an external clock. I read that the embedded series cannot take in a 10MHz reference clock but can take in a 1PPS. I generated a 1 PPS signal using a signal generator and using a power splitter, I sent the 1PPS signal to both USRPs via the sync port on the USRPs. When I try to run an example programs (rx_samples_to_file on one USRP and tx_samples_from_file on the other USRP) using the ref argument, it says that the ref argument is not supported. How can I sync up the two USRPs?
Thanks
_______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
