Btw.. just to validate what image I used...

I have the E310 E version...

The instructions I think may not be correct...  Here they are cut and paste...  
Please validate....


For the E310, the product number will be 156333X-01L, where X is a letter from 
A to Z. For devices where X is A, B, C, D, the images under the 
"ettus-e3xx-sg1" folder should be used. For devices where X is E or later, the 
images under the "ettus-e3xx-sg3" folder should be used. (WHAT I USED) You must 
use the appropriate image for your specific device. The incorrect image will 
not work, and will only boot as far as the U-Boot boot loader before stopping.



BUT this is what is written also...



For the E312, the product number will be 140605X-01L, where X is a letter from 
A to Z. The images under the "ettus-e3xx-sg3" folder should be used for all 
E312 devices.

So you told me to go to release 4 (also the directions did)...  and then I 
chose the sg3 directory - Is this correct???  Thus, both the E310 E and E312 
devices use the sg3 directory????

I used the Ettus-3xx-sg3 directory and downloaded those versions.  I am 
assuming they are the correct versions.

Thanks...

From: Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC]
Sent: Tuesday, August 08, 2017 11:15 AM
To: 'Nate Temple' <nate.tem...@ettus.com>; Marcus Müller 
<marcus.muel...@ettus.com>
Cc: usrp-users <usrp-users@lists.ettus.com>
Subject: RE: [USRP-users] When ssh'ing Getting prompt for Password Issue

Nate,

The instructions are very well written and detailed.. Thanks...

Actually, most of the steps I was doing correctly from all the various portions 
of documents.  But it is good you placed all in one document.  Thanks...

Everything worked well up until I burned the image.

When I did the terminal  command - sudo screen /dev/ttyUSB0 115200 - and then 
turned on the E310, I received "Unable to read file uImage-zynq-e31x-3.dtb"

I tried both tx version - demo and dev...  Both did the same thing...

I have another SD card that we ordered with the unit.  I will try to re-image 
that card and see hwat happens...  Of course, I will let you know.

Thanks,

Konstantin

From: Nate Temple [mailto:nate.tem...@ettus.com]
Sent: Monday, August 07, 2017 9:29 PM
To: Marcus Müller <marcus.muel...@ettus.com<mailto:marcus.muel...@ettus.com>>
Cc: usrp-users <usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>>; 
Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] 
<konstantin.j.math...@nasa.gov<mailto:konstantin.j.math...@nasa.gov>>
Subject: Re: [USRP-users] When ssh'ing Getting prompt for Password Issue

Hi Konstantin,

Please see the updated version of the PDF, attached to this email. One of the 
screen captures needed to be updated.

Regards,
Nate Temple



Previous message
-------------------------------
Hi Konstantin,

I had an error in my previous email. The default setting for the release-4 
image is to have a DHCP address. You'll need to edit /etc/network/interfaces 
and update it to operate with a static IP.

Please see the attached PDF that will walk through the process of burning the 
release-4 SD Card image to a blank SD Card, and then the required steps to 
configure the Ubuntu VM within the Windows host to connect via the Serial 
interface to update the /etc/network/interfaces file, and then connect via SSH.

Also, with 1GbE connections, you do not need to use a cross over cable. 1GbE 
has auto-MDIX which will allow a normal straight through ethernet cable to be 
used when directly connecting devices.

Regards,
Nate Temple
-------------------------------
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
  • Re:... Derek Kozel via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Derek Kozel via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Derek Kozel via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Marcus Müller via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Nate Temple via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Nate Temple via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Nate Temple via USRP-users
  • Re:... Nate Temple via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Nate Temple via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users

Reply via email to