HI Marcus, thank you for your reply.
Yes,it,s depend on daughter board. I mean we used UBX160 with x310 work on TDD mode with TX/RX port. best regards John Hi John, what kind of switching do you mean? *Antenna switching:* that doesn't depend on the X310, but on the daughter board, since the microwave switch doing that resides on the individual daughterboards. Anyway, these times should be in the nanoseconds. You can use timed commands with UHD to switch exactly when you need to. *Streamer switching:* If you need to stop transmitting, and then to start transmitting: that might take a little longer, but it's usually circumventable. Hope that helps, Best regards, On Thu, Aug 10, 2017 at 12:02 PM, john liu <johncorad1...@gmail.com> wrote: > Hi all, > How about switching time for TX/RX for X310 when on Half-Duplex Mode? > thank you. > > best regards > John > > >
_______________________________________________ USRP-users mailing list USRPemail@example.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com