On 10/26/2017 01:25 PM, Mark Koenig via USRP-users wrote:
Just bringing this back to the top.
I've never had to do this myself, but folks who've had to use the
"Impact" tool from the ISE package (since N2xx use ISE and not Vivado).
Use the appropriate .bit file from the "bit" subdirectory of the images
directory that UHD installs usually under <prefix>/share/uhd/images
*From: *Mark Koenig <[email protected]>
*Date: *Monday, October 23, 2017 at 2:26 PM
*To: *"[email protected]" <[email protected]>
*Subject: *Reprogramming a "Bricked" N210
I have been trying to use Vivado lab to return my N210 to a useable
state and am looking for some help.
I see the green light lit on the Xilinx USB to JTAG adaptor and the
connection seems good, however, I keep getting errors during the
programming of the EE_PROM. Below is what I constantly see when
trying to reprogram the N210.
Any help would be greatly appreciated.
Thank you
Mark
set_property PROBES.FILE {} [lindex [get_hw_devices] 0]
set_property PROGRAM.FILE {/usr/local/share/uhd/images/usrp2_fpga.bin}
[lindex [get_hw_devices] 0]
program_hw_devices [lindex [get_hw_devices] 0]
ERROR: [Labtools 27-3165] End of startup status: LOW
ERROR: [Common 17-39] 'program_hw_devices' failed due to earlier errors.
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
