All: I'm wondering how to use the second ethernet port on my x310. I've been going through the online Ettus SDR help, but can't seem to find the right pages.
The short version of my question is: Can I use the two ethernet ports independently, say when each of them is connected to a separate computer? If so, how do I set up the second port? I'm using computers with 1 GiG Ethernet only. Details/Context: I have a working gnuradio companion flowgraph that generates a signal indefinitely and applies it to (A:0, Tx/Rx). That output port is connected by a cable to (B:0, RX2). All indications are that this is working well. At irregular intervals, I want to obtain large numbers of samples from (B:0, RX2) by calling, say, uhd_rx_cfile or the like, outside of the flowgraph, which is still running. I'm prevented from doing that while the flowgraph is running. Can I do it using the second 1 GiG port if I set it up properly? Thanks for any advice you can offer. Chad -- Chad M. Spooner NorthWest Research Associates 301 Webster Street Monterey, CA 93940 [email protected] 831 582 4904 cyclostationary.blog
_______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
