Hello, The tuning time is approximately 5 ms, which is why the example uses that number. The example should work the same on either Windows or Linux. What version of UHD are you using on Windows which does not include it?
Are you seeing any streaming errors on Windows? Regards, Derek On Mon, Feb 26, 2018 at 2:53 PM, Андрей 1 via USRP-users < usrp-users@lists.ettus.com> wrote: > > Hello > > Im using X300+TwinRX in Windows. > In source UHD 3.10.3 for linux I found example twinrx_freq_hopping. > How much I understand in this example the receiver is tuned with the > period 5ms.As written in the title of the example, I need to use > set_rx_lo_freq.But it is not in the source code of the example. > When I compile and run this example in windows I found much more begger > times (about 30-40 ms) to receive correct spectrum.(If I leave the time as > in the example, then there are no parts of the spectrum and so the receiver > does not have time to tune in). > > My questions > > What minimum tuning time for TwinRX+X300? > Why is there no such example for Windows? > Is it necessary to use set_rx_lo_freq to reduce setup time? > > Thank you > > . > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
