On 03/20/2018 09:31 AM, Laura Arjona via USRP-users wrote:
Hello,
I want to connect an external PA to the Tx port of the SBX board.
My goal is to transmit a 25dBm signal in the range of 850-920MHz.
Becasue I tried with two different PA, and none of them worked with
the usrp, I was wondering
if someone had used one PA before, and worked fine.
Thanks
Laura
Could you describe what you mean by "none of them worked"? An RF power
amplifier is a very generic thing, and they really don't care
*where* they're getting their input RF power from. What units do
you try, and what were the results?
--
* Laura Arjona Aguilera*
Ph. D. Reseach Candidate*
*
*
*
DeustoTech Mobility - Fundación Deusto, Avda Universidades, 24,48007,
Bilbao
Faculty of Engineering, University of Deusto, Avda Universidades,
24,48007, Bilbao
Tel. +34 944 139 073
http://www.deustotech.eu <http://www.deustotech.eu/>
http://mobility.deustotech.eu <http://mobility.deustotech.eu/>
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
