On Wed, Apr 11, 2018 at 10:15 PM Yeo Jin Kuang Alvin (IA) <
yjink...@dso.org.sg> wrote:

> Hi,
>
>
>
> Sorry I am very new to all these, do you mean that I have to download
> visual studio to compile all the UHD .cpp and run them for the UHD
> commands?
>

No, I mean that you can probably just get away with using UHD as-is with a
program you write (either in Python or C++) invoking a UHD device and
configuring it. There are many examples included in uhd/host/examples. If
you are lucky you might even get away with using one of the example
programs without modification, but I doubt it.


> And for the FPGA image you talking about, is it the .bit file that is
> generated in the IMPACT?
>

Yes.

You have a long learning curve ahead of you. It's a good idea at this point
to simply install UHD and get started using the B210 with some of the UHD
examples to see how it works in practice.

Nick


>
>
> Thank you in advance!
>
>
>
> *From:* Nick Foster [mailto:bistrom...@gmail.com]
> *Sent:* Thursday, 12 April 2018 12:04 PM
>
>
> *To:* Yeo Jin Kuang Alvin (IA)
> *Cc:* usrp-users@lists.ettus.com
> *Subject:* Re: [USRP-users] AD9361 in USRP B210
>
>
>
> The best option is probably to use existing UHD commands to set the gain,
> frequency, master clock rate, etc., while modifying the image to generate
> the transmit signal in the FPGA rather than in the host.
>
> Nick
>
>
>
> On Wed, Apr 11, 2018 at 6:41 PM Yeo Jin Kuang Alvin (IA) <
> yjink...@dso.org.sg> wrote:
>
> Hi,
>
>
>
> I have the FPGA source code using Xilinx ISE 14.7, I want to output a
> signal out that is generated from the FPGA, however I suppose I have to
> control the AD9361 to get an output out to transmit unless I am wrong.
>
>
>
> Thanks in advance!
>
>
>
> *From:* Nick Foster [mailto:bistrom...@gmail.com]
> *Sent:* Thursday, 12 April 2018 9:39 AM
> *To:* Yeo Jin Kuang Alvin (IA)
> *Cc:* usrp-users@lists.ettus.com
> *Subject:* Re: [USRP-users] AD9361 in USRP B210
>
>
>
> What exactly do you want to do?
>
>
>
> On Wed, Apr 11, 2018 at 6:33 PM Yeo Jin Kuang Alvin (IA) via USRP-users <
> usrp-users@lists.ettus.com> wrote:
>
> Hi all,
>
>
>
> How do we set up the Ad9361_driver and ad9361 controls in the
> uhd/host/lib/usrp/common file for Ubuntu? What are the steps and
> prerequisites for this?
>
>
>
> Thank you in advance!
>
> _______________________________________________
> USRP-users mailing list
> USRP-users@lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
>
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to