Hi Martin, I saw that utilization report but as I can see it is not divided by blocks, it just says the complete usage of resources? I understand about not being able to provide the support for a completely stripped design, that is not my intention. I have also tried to build the project following the instructions but I got the error about design not satisfying timing constraints.
Kind regards, Nives 2018-04-19 23:18 GMT+02:00 Martin Braun <[email protected]>: > On 04/19/2018 07:35 AM, Nives Novković via USRP-users wrote: > > I can see by the official numbers that the default Ettus FPGA design on > > X310 takes about 50% BRAM and on X300 about 90%. I would like to make my > > own design for Ettus but use only ADC and Ethernet cores from the > > default design. Does anybody know how much BRAM blocks would only those > > 2 cores from the original design take up? Thank you in advance! > > Our current UHD images packages (which you get when you run > uhd_images_downloader) include a utilization report. I'm assuming you > mean you want to remove all RFNoC blocks except for the radio -- if you > really want to remove *everything*, that would be an invasive change, > for which we wouldn't be able to provide any support. > > -- M >
_______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
