Hello Artjom,
Is this the unmodified image? The error basically complains about too much
logic to put on the FPGA, and that doesn't happen with our stock images. How
are you building this?
Best regards,
Marcus
On 19 May 2018 20:16:40 GMT+02:00, "Артем Асадчий via USRP-users"
<usrp-users@lists.ettus.com> wrote:
>Hi everyone,
>
>I've got a problem, when try to build E310_sg3.bit:
>
>ERROR: [Place 30-487] The packing of instances into the device could
>not be
>obeyed. There are a total of 13300 slices in the pblock, of which 7850
>slices are available, however, the unplaced instances require 9752
>slices.
>Please analyze your design to determine if the number of LUTs, FFs,
>and/or
>control sets can be reduced.
>ERROR: [Place 30-99] Placer failed with error: 'Detail Placement failed
>please check previous errors for details.'
>[00:10:36] Current task: Placer +++ Current Phase: 3.5 Small Shape
>Detail
>PlacemERROR: [Common 17-69] Command failed: Placer could not place all
>instances
>[00:10:37] Current task: Placer +++ Current Phase: 3.5 Small Shape
>Detail
>Placement
>[00:10:37] Current task: Placer +++ Current Phase: Finished
>[00:10:37] Process terminated. Status: Failure
>
>========================================================
>Warnings: 560
>Critical Warnings: 39
>Errors: 3
>
>Makefile.e300.inc:103: recipe for target 'bin' failed
>make[1]: *** [bin] Error 1
>make[1]: Leaving directory '/home/artyom/workspace/ettus/
>rfnoc/uhd/fpga-src/usrp3/top/e300'
>Makefile:63: recipe for target 'E310_sg3' failed
>make: *** [E310_sg3] Error 2
>
>How can i solve this problem?
--
This was written on my cellular phone. whilst an impressive piece of
engineering, this might not be the perfect device to write emails on - please
excuse my brevity.
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
