Same error still, unfortunately even after setting the gateway and subnet
on the N210 via usrp_burn_mb_eeprom and power-cycling.
For the N210:
| | Mboard: N210r4
| | hardware: 2577
| | mac-addr: a0:36:fa:25:3e:96
| | ip-addr: 192.168.10.5
| | subnet: 255.255.255.0
| | gateway: 192.168.10.1
| | gpsdo: none
| | serial: E9R1EQ6UP
| | FW Version: 12.4
| | FPGA Version: 11.1
| |
| | Time sources: none, external, _external_, mimo
| | Clock sources: internal, external, mimo
| | Sensors: mimo_locked, ref_locked
For the X310:
Mboard: X310
| | revision: 8
| | revision_compat: 7
| | product: 30818
| | mac-addr0: 00:80:2f:25:c1:ec
| | mac-addr1: 00:80:2f:25:c1:ed
| | gateway: 192.168.10.1
| | ip-addr0: 192.168.10.2
| | subnet0: 255.255.255.0
| | ip-addr1: 192.168.20.2
| | subnet1: 255.255.255.0
| | ip-addr2: 192.168.30.2
| | subnet2: 255.255.255.0
| | ip-addr3: 192.168.40.2
| | subnet3: 255.255.255.0
| | serial: 30E781A
| | FW Version: 5.0
| | FPGA Version: 33.0
| | RFNoC capable: Yes
| |
| | Time sources: internal, external, gpsdo
| | Clock sources: internal, external, gpsdo
| | Sensors: ref_locked
-----------------------------------------------------------------
colosseum@colosseum-ThinkPad-T430:~/wireless/lp_door/doppler/usrp_sync$
python ~/Downloads/for_steve_gough.py
WARNING: Config file '/home/colosseum/.gnuradio/config.conf' failed to
parse:
std::exception
Skipping it
WARNING: Config file '/home/colosseum/.gnuradio/config.conf' failed to
parse:
std::exception
Skipping it
WARNING: Config file '/home/colosseum/.gnuradio/config.conf' failed to
parse:
std::exception
Skipping it
linux; GNU C++ version 5.4.0 20160609; Boost_105800;
UHD_003.011.000.git-78-gf70dd85d
UHD Error:
Device discovery error: ValueError: Could not resolve device hint
"addr=192.168.10.2" to a single device.
UHD Error:
Device discovery error: ValueError: Could not resolve device hint
"addr=192.168.10.5" to a single device.
Traceback (most recent call last):
File "/home/colosseum/Downloads/for_steve_gough.py", line 95, in <module>
main()
File "/home/colosseum/Downloads/for_steve_gough.py", line 84, in main
tb = top_block_cls()
File "/home/colosseum/Downloads/for_steve_gough.py", line 36, in __init__
channels=range(5),
File
"/home/colosseum/src/gr-prefix/lib/python2.7/dist-packages/gnuradio/uhd/__init__.py",
line 122, in constructor_interceptor
return old_constructor(*args)
File
"/home/colosseum/src/gr-prefix/lib/python2.7/dist-packages/gnuradio/uhd/uhd_swig.py",
line 2686, in make
return _uhd_swig.usrp_source_make(*args)
RuntimeError: LookupError: KeyError: No devices found for ----->
Device Address:
addr0: 192.168.10.2
addr1: 192.168.10.5
---------------------------------------------------------------------------------------------------------------------------
Is there any other reason why this might be happening ?
Thanks!
Steve
On Wed, May 30, 2018 at 2:05 PM, Marcus D. Leech <[email protected]> wrote:
> On 05/30/2018 02:00 PM, Steve Gough wrote:
>
> Thanks for the reply, Ian and Marcus.
>
> I see. Could you please tell me what should be the values I must set on
> the host and N210 for the gateway and subnet ?
>
> Thanks!
>
> Gateway addy should all be (assuming 192.168.10.x) subnet:
>
> 192.168.10.1
>
> Subnet mask should be:
>
> 255.255.255.0
>
>
>
> On Wed, May 30, 2018 at 12:36 PM, Ian Buckley via USRP-users <
> [email protected]> wrote:
>
>> Those N210 settings are broken also…bad subnet and gateway
>>
>> > On May 30, 2018, at 9:26 AM, Marcus D. Leech via USRP-users <
>> [email protected]> wrote:
>> >
>> > On 05/30/2018 12:22 PM, Steve Gough via USRP-users wrote:
>> >> Hi Neel and USRP mailing list,
>> >>
>> >> The uhd_usrp_probe returns as follows:
>> >>
>> >> For the N210 with WBX:
>> >> Mboard: N210r4
>> >> | | hardware: 2577
>> >> | | product: 30194
>> >> | | mac-addr: a0:36:fa:25:3a:6b
>> >> | | ip-addr: 192.168.10.4
>> >> | | subnet: 255.255.255.255
>> >> | | gateway: 255.255.255.255
>> >>
>> >> For the X310 with 2 TwinRXs:
>> >> Mboard: X310
>> >> | | revision: 8
>> >> | | revision_compat: 7
>> >> | | product: 30818
>> >> | | mac-addr0: 00:80:2f:25:c1:ec
>> >> | | mac-addr1: 00:80:2f:25:c1:ed
>> >> | | gateway: 192.168.10.1
>> >> | | ip-addr0: 192.168.10.2
>> >> | | subnet0: 255.255.255.0
>> >> | | ip-addr1: 192.168.20.2
>> >> | | subnet1: 255.255.255.0
>> >> | | ip-addr2: 192.168.30.2
>> >> | | subnet2: 255.255.255.0
>> >> | | ip-addr3: 192.168.40.2
>> >> | | subnet3: 255.255.255.0
>> >>
>> >> So, yes, it looks like the N210 and the X310 devices have different
>> MAC addresses.
>> >> ------------------------------------------------------------
>> --------------------------------------
>> >>
>> >>
>> >> The IPv4 settings on the host are :
>> >> Address : 192.168.10.1
>> >> Netmask : 24
>> >> Gateway : 192.168.10.255
>> >>
>> >>
>> > The gateway address you have set on your host is the subnet-broadcast
>> address. Not sure if this makes a difference in this case, since you're
>> never going
>> > "off net" and will not require the gateway. But maybe it's confusing
>> your IP stack a bit?
>> >
>> >
>> >
>> > _______________________________________________
>> > USRP-users mailing list
>> > [email protected]
>> > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>
>>
>> _______________________________________________
>> USRP-users mailing list
>> [email protected]
>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>
>
>
>
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
