Dear Ishai, only the 200 MHz clock rate is supported. 100 MHz is never supported; in LabVIEW configurations, 120 MHz might be the native rate, but it's not a rate that you can generally use. 184.32 MHz is no longer supported.
May I ask what the reason for this inquiry is? Very often, flexible downsampling in the FPGA solves a lot of user problems, so if you describe the system you need to build, we might be able to help you better. Best regards, Marcus On Sun, 2018-06-10 at 18:44 +0300, ishai alouche via USRP-users wrote: > Hi all, > > I use x310 and i want to confige the clock of the usrp. Can someone > help me how to confige the clock of the x310 and what is the avilable > rate? I saw that 100Mhz and 200Mhz are avialble, there are other > rates that can be confige? > > Thank in advance > _______________________________________________ > USRP-users mailing list > [email protected] > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com _______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
