Hello. I had a problem with installing and configuring RFNoc for the E313 board. When I execute the uhd_images_downloader command on the board, it gives me the address to download the rfnoc archive, but it produces the following: [INFO] Images destination: / usr / local / share / uhd / images [INFO] No inventory file found at /usr/local/share/uhd/images/inventory.json. Creating an empty one. 00006 kB / 00006 kB (100%) usrp1_b100_fw_default-g6bea23d.zip and in the future I don `t know what archive to download to me. Thanks for the help.
2018-06-08 12:53 GMT+03:00 Derek Kozel <[email protected]>: > Hello Ivan, > > The antenna ports are named TX/RX and RX2 for channel 0 and 1, the same as > the B210. The standard USRP Source and Sink block will allow you to select > these antennas. This assumes that you are running GNU Radio on the USRP. > The ZMQ application note provides a way to move lower sample rate streams > to a remote computer. > > Regards, > Derek > > On Fri, Jun 8, 2018 at 10:13 AM, Ivan Zahartchuk <[email protected]> > wrote: > >> Thanks for the help. Could you tell me more about how to access the >> ports of RХ1, RX2 and ТХ1 ТХ2 in the gnuradio? >> >> 2018-06-06 12:17 GMT+03:00 Derek Kozel <[email protected]>: >> >>> Hello Ivan, >>> >>> Here are a few links to get you started. As an embedded computing device >>> you'll find the experience somewhat different from a B200. >>> >>> https://kb.ettus.com/Ettus_USRP_E300_Embedded_Family_Getting >>> _Started_Guides >>> https://kb.ettus.com/Ettus_USRP_E300_Embedded_Family_Hardware_Resources >>> >>> https://kb.ettus.com/Software_Development_on_the_E310_and_E312 >>> https://kb.ettus.com/Streaming_processed_data_from_the_E31x_ >>> with_GNU_Radio_and_ZMQ >>> >>> Regards, >>> Derek >>> >>> On Wed, Jun 6, 2018 at 8:40 AM, Ivan Zahartchuk via USRP-users < >>> [email protected]> wrote: >>> >>>> Hello. Recently I fell into the hands of the USRP E313. I'm interested >>>> in a few questions about it. >>>> 1. Is it possible to visualize the data that it processes? >>>> 2. Is there any instruction for working and programming boards of this >>>> kind? >>>> I used to work with the USRP B200, but everything is a bit simpler >>>> there. >>>> >>>> _______________________________________________ >>>> USRP-users mailing list >>>> [email protected] >>>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >>>> >>>> >>> >> >
_______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
