Link should be: https://github.com/EttusResearch/fpga/blob/f27926410328883a315d5230146936d2d782bd09/usrp3/top/e300/e310_core.v#L319
On 07/24/2018 02:20 PM, Martin Braun wrote: > I think you might be fine changing this line: > > https://github.com/EttusResearch/fpgadev/blob/f27926410328883a315d5230146936d2d782bd09/usrp3/top/e300/e310_core.v#L319 > > ...but it's untested and unsupported. > > Cheers, > Martin > > On 07/22/2018 04:02 AM, carry chen via USRP-users wrote: >> Hi, >> >> list, >> >> I want the usrp e310 run only one tx path and one rx path (to save some >> fpag resource) >> >> how can I modify the host code and fpga code ? >> >> I use the uhd version: ca09fd2bea0128c18eac4b0ff8a9b30fccdf7698 >> >> fpga version: 63e630a13fde1735b98eab1f401f60f0b354cafb >> >> >> Thanks. >> >> >> Best, Regards, >> >> Carry >> >> >> >> _______________________________________________ >> USRP-users mailing list >> USRP-users@lists.ettus.com >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >> > _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com