@Brian what format should this data be in? Is there a common file type for this kind of trouble shooting?
@Marcus In terms of my intentions, I would like to same 20Mhz of spectrum (88Hmz-108Mhz) at a rate of ~20Mhz, the RF team has told me that should be enough to test the quality of various FM streams in the space. The idea is that you could analyze the entire RF space in a geographic location but also run assessments on the quality of audio streams being broadcasted over the air. uhd_usrp_probe: [INFO] [UHD] Mac OS; Clang version 9.1.0 (clang-902.0.39.2); Boost_106600; UHD_3.13.0.1-MacPorts-Release [INFO] [USRP2] Opening a USRP2/N-Series device... [INFO] [USRP2] Current recv frame size: 1472 bytes [INFO] [USRP2] Current send frame size: 1472 bytes _____________________________________________________ / | Device: USRP2 / N-Series Device | _____________________________________________________ | / | | Mboard: N210r4 | | hardware: 2577 | | mac-addr: 00:80:2f:19:76:ea | | ip-addr: 192.168.10.2 | | subnet: 255.255.255.255 | | gateway: 255.255.255.255 | | gpsdo: none | | serial: 315C829 | | FW Version: 12.4 | | FPGA Version: 11.1 | | | | Time sources: none, external, _external_, mimo | | Clock sources: internal, external, mimo | | Sensors: mimo_locked, ref_locked | | _____________________________________________________ | | / | | | RX DSP: 0 | | | | | | Freq range: -50.000 to 50.000 MHz | | _____________________________________________________ | | / | | | RX DSP: 1 | | | | | | Freq range: -50.000 to 50.000 MHz | | _____________________________________________________ | | / | | | RX Dboard: A | | | ID: WBX v4, WBX v4 + Simple GDB (0x0063) | | | Serial: 3158D33 | | | _____________________________________________________ | | | / | | | | RX Frontend: 0 | | | | Name: WBXv4 RX+GDB | | | | Antennas: TX/RX, RX2, CAL | | | | Sensors: lo_locked | | | | Freq range: 25.000 to 2200.000 MHz | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | | | Bandwidth range: 40000000.0 to 40000000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | RX Codec: A | | | | Name: ads62p44 | | | | Gain range digital: 0.0 to 6.0 step 0.5 dB | | | | Gain range fine: 0.0 to 0.5 step 0.1 dB | | _____________________________________________________ | | / | | | TX DSP: 0 | | | | | | Freq range: -200.000 to 200.000 MHz | | _____________________________________________________ | | / | | | TX Dboard: A | | | ID: WBX v4 (0x0062) | | | Serial: 3158D33 | | | ID: WBX + Simple GDB, WBX v3 + Simple GDB, WBX v4 + Simple GDB, WBX-120 + Simple GDB (0x004f) | | | Serial: 3153A62 | | | _____________________________________________________ | | | / | | | | TX Frontend: 0 | | | | Name: WBXv4 TX+GDB | | | | Antennas: TX/RX, CAL | | | | Sensors: lo_locked | | | | Freq range: 25.000 to 2200.000 MHz | | | | Gain range PGA0: 0.0 to 31.0 step 1.0 dB | | | | Bandwidth range: 40000000.0 to 40000000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | TX Codec: A | | | | Name: ad9777 | | | | Gain Elements: None
_______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
