Hi Vladica, did you try the 3.13 release line, too? This might either solve your issue or at least help us narrow down reasons. I don't think we'll put out 3.10.X.X and 3.11.X.X releases for ever, since they're not the current release branch.
Best regards, Marcus On Wed, 2018-09-26 at 14:18 +0200, Vladica Sark via USRP-users wrote: > Hi folks, > > I have a C/C++ code that transmits frames in a given time slots from > 2x > X310. All 4 AFEs are used (2 on each X310). The duty cycle is > relatively > low, 1 frame in each 10 ms. Frame duration is a few hundred > microseconds. The processing is not CPU intensive. The problem is > that > all 4 cores on my laptop have 100% utilization during transmission. > This > happens with all UHD 3.10 and 3.11 releases but not with 3.9. With > 3.9 > the CPU utilization is less than 10%. > > I had this problem in the past but I was not using a release, but a > version under development. I switched to a release, as it was > suggested > here, since the release should have less bugs. Unfortunately, these > bugs > were not corrected in the coming 3.10 and 3.11 releases. > > BR, > Vladica > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
