On 02/23/2019 04:04 PM, Sirkin, Joshua F. via USRP-users wrote:
I had a question about the TCXO GPSDO module for the B200/B210.  I am 
interested in using it without a gps lock as a better clock than the tcxo that 
is internal to the bare board.  I am only interested in frequency stability, 
not time of day.   If I did use it in this way, I had a few questions:

1)   The spec on it says that it is 75ppb over temperature in unlock condition. 
 That is the only data point I can find about using it unlocked.  Do you have 
any better numbers on what should be expected for frequency stability cold 
booting the device without ever giving it any gps if I select my reference 
source as external?
What numbers are you looking for?

2)   Is the ref_locked sensor value for aligning the GPSDO to a gps reference?  
Can I skip the ref locked check if I am not using gps?
The "ref_locked" sensor tells you when the reference PLL has achieved lock to an external source. This usually happens within milliseconds of the "external source" (whether that's the GPSDO or an external 10MHz reference) being present.

3)   I believe I read somewhere that the GPSDO uses the same 10MHz lines as the 
REF in.  What happens if I have a 10Mhz source hooked up while the gpsdo module 
is installed when I do not have a gps lock?  What would happen if a 10Mhz input 
was hooked up while I did have a gps lock?
There are electrical cross-talk issues between the GPSDO's 10MHz line and the external reference line. So, if you plan to use an external
  reference, you should remove the GPSDO module from the board.



________________________________
  This message is intended only for the use of the individual or entity to 
which it is addressed and may contain ZETA Associates confidential or 
proprietary information. If you are not the intended recipient, any use, 
dissemination, or distribution of this communication is prohibited. If you have 
received this communication in error, please notify the sender and delete all 
copies.

_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com


_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to